commit 0cc244011f40280b78fc344d5c2aac5a0c659f77 Author: Greg Kroah-Hartman Date: Wed Apr 7 12:47:05 2021 +0200 Linux 4.14.229 Tested-by: Guenter Roeck Tested-by: Jason Self Tested-by: Linux Kernel Functional Testing Tested-by: Hulk Robot Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20210405085021.996963957@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 1e353852b3ae9baf9038cd377227526a3a239f20 Author: Du Cheng Date: Fri Mar 12 16:14:21 2021 +0800 drivers: video: fbcon: fix NULL dereference in fbcon_cursor() commit 01faae5193d6190b7b3aa93dae43f514e866d652 upstream. add null-check on function pointer before dereference on ops->cursor Reported-by: syzbot+b67aaae8d3a927f68d20@syzkaller.appspotmail.com Cc: stable Signed-off-by: Du Cheng Link: https://lore.kernel.org/r/20210312081421.452405-1-ducheng2@gmail.com Signed-off-by: Greg Kroah-Hartman commit 2bcc14fce703970bd32f39385a1a96b08e484800 Author: Atul Gopinathan Date: Tue Mar 23 17:04:14 2021 +0530 staging: rtl8192e: Change state information from u16 to u8 commit e78836ae76d20f38eed8c8c67f21db97529949da upstream. The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4 bytes in total while the operations performed on this array through-out the code base are only 2 bytes. The "CcxRmState" field is fed only 2 bytes of data using memcpy(): (In rtllib_rx.c:1972) memcpy(network->CcxRmState, &info_element->data[4], 2) With "info_element->data[]" being a u8 array, if 2 bytes are written into "CcxRmState" (whose one element is u16 size), then the 2 u8 elements from "data[]" gets squashed and written into the first element ("CcxRmState[0]") while the second element ("CcxRmState[1]") is never fed with any data. Same in file rtllib_rx.c:2522: memcpy(dst->CcxRmState, src->CcxRmState, 2); The above line duplicates "src" data to "dst" but only writes 2 bytes (and not 4, which is the actual size). Again, only 1st element gets the value while the 2nd element remains uninitialized. This later makes operations done with CcxRmState unpredictable in the following lines as the 1st element is having a squashed number while the 2nd element is having an uninitialized random number. rtllib_rx.c:1973: if (network->CcxRmState[0] != 0) rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07; network->MBssidMask is also of type u8 and not u16. Fix this by changing the type of "CcxRmState" from u16 to u8 so that the data written into this array and read from it make sense and are not random values. NOTE: The wrong initialization of "CcxRmState" can be seen in the following commit: commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver") The above commit created a file `rtl8192e/ieee80211.h` which used to have the faulty line. The file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib.h` along with additional code in the commit 94a799425eee (tagged in Fixes). Fixes: 94a799425eee ("From: wlanfae [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by: Atul Gopinathan Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com Signed-off-by: Greg Kroah-Hartman commit 6981144641b1f5e08277a7a7fa0799b213cdbea9 Author: Atul Gopinathan Date: Tue Mar 23 17:04:12 2021 +0530 staging: rtl8192e: Fix incorrect source in memcpy() commit 72ad25fbbb78930f892b191637359ab5b94b3190 upstream. The variable "info_element" is of the following type: struct rtllib_info_element *info_element defined in drivers/staging/rtl8192e/rtllib.h: struct rtllib_info_element { u8 id; u8 len; u8 data[]; } __packed; The "len" field defines the size of the "data[]" array. The code is supposed to check if "info_element->len" is greater than 4 and later equal to 6. If this is satisfied then, the last two bytes (the 4th and 5th element of u8 "data[]" array) are copied into "network->CcxRmState". Right now the code uses "memcpy()" with the source as "&info_element[4]" which would copy in wrong and unintended information. The struct "rtllib_info_element" has a size of 2 bytes for "id" and "len", therefore indexing will be done in interval of 2 bytes. So, "info_element[4]" would point to data which is beyond the memory allocated for this pointer (that is, at x+8, while "info_element" has been allocated only from x to x+7 (2 + 6 => 8 bytes)). This patch rectifies this error by using "&info_element->data[4]" which correctly copies the last two bytes of "data[]". NOTE: The faulty line of code came from the following commit: commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver") The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c` which had the faulty line of code. This file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib_rx.c` along with additional code in the commit 94a799425eee (tagged in Fixes). Fixes: 94a799425eee ("From: wlanfae [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by: Atul Gopinathan Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com Signed-off-by: Greg Kroah-Hartman commit 6b4aa86542b4659d8c95e41f2c75a7d7dd969133 Author: Tong Zhang Date: Wed Mar 17 19:04:00 2021 -0400 usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference commit 72035f4954f0bca2d8c47cf31b3629c42116f5b7 upstream. init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool. however, dev->dev is actually set after calling init_dma_pools(), which effectively makes dma_pool_create(..NULL) and cause crash. To fix this issue, init dma only after dev->dev is set. [ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290 [ 1.323257] Call Trace: [ 1.323390] ? pci_write_config_word+0x27/0x30 [ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core] [ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci] Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create') Cc: stable Signed-off-by: Tong Zhang Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman commit a110a1d03ac71d10ff18b0e3983efec607093187 Author: Johan Hovold Date: Mon Mar 22 16:53:12 2021 +0100 USB: cdc-acm: fix use-after-free after probe failure commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream. If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 88fc6e1ae2ff99d595ca07a3a572cd6f8caac90d Author: Oliver Neukum Date: Thu Mar 11 14:01:26 2021 +0100 USB: cdc-acm: downgrade message to debug commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream. This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 0ea160742f4b3539a7977d3d45fb75b07de4e76e Author: Oliver Neukum Date: Thu Mar 11 14:01:25 2021 +0100 USB: cdc-acm: untangle a circular dependency between callback and softint commit 6069e3e927c8fb3a1947b07d1a561644ea960248 upstream. We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 5b00c605a81f39fa5cc89f64778443c5eae6620d Author: Oliver Neukum Date: Thu Mar 11 14:37:14 2021 +0100 cdc-acm: fix BREAK rx code path adding necessary calls commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream. Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit 7d8a40162ebc0f5b8c1aa5cf8e88d35ef97e7f2a Author: Chunfeng Yun Date: Tue Mar 23 15:02:46 2021 +0800 usb: xhci-mtk: fix broken streams issue on 0.96 xHCI commit 6f978a30c9bb12dab1302d0f06951ee290f5e600 upstream. The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman commit 5dc2a68b1b571ec0633bab9dfe9a9326e6a09619 Author: Tony Lindgren Date: Wed Mar 24 09:11:41 2021 +0200 usb: musb: Fix suspend with devices connected for a64 commit 92af4fc6ec331228aca322ca37c8aea7b150a151 upstream. Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah . Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah Tested-by: Bhushan Shah Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit 99b948bd84de1597ceb7b8df45199663d1851271 Author: Vincent Palatin Date: Fri Mar 19 13:48:02 2021 +0100 USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd upstream. This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by: Vincent Palatin Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman commit ae6d3a93a0a5e0309c7ff8137a08713f5608c4ef Author: Shuah Khan Date: Wed Mar 24 17:06:54 2021 -0600 usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() commit 1cc5ed25bdade86de2650a82b2730108a76de20c upstream. Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling. UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42 shift exponent 768 is too large for 32-bit type 'int' Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 8aa6e548a5ee59c91e9e5d67fd6de5cbaa5c458a Author: Zheyu Ma Date: Sat Apr 3 06:58:36 2021 +0000 firewire: nosy: Fix a use-after-free bug in nosy_ioctl() [ Upstream commit 829933ef05a951c8ff140e814656d73e74915faf ] For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) Signed-off-by: Zheyu Ma Cc: Greg Kroah-Hartman Cc: Stefan Richter Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 2d956c59648288da954b0cc0e008bd21d5f43823 Author: Dinghao Liu Date: Tue Jan 19 16:10:55 2021 +0800 extcon: Fix error handling in extcon_dev_register [ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin commit 8fb4f3e42f2087d5da7146a3b02bf28b0cdcfd43 Author: Krzysztof Kozlowski Date: Thu Dec 31 09:52:52 2020 +0100 extcon: Add stubs for extcon_register_notifier_all() functions [ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ] Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON case. This is useful for compile testing and for drivers which use EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON). Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors") Reported-by: kernel test robot Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin commit b48ed846ab92805b79038dad017d44aa2d2eede9 Author: Wang Panzhenzhuan Date: Tue Feb 23 18:07:25 2021 +0800 pinctrl: rockchip: fix restore error in resume commit c971af25cda94afe71617790826a86253e88eab0 upstream. The restore in resume should match to suspend which only set for RK3288 SoCs pinctrl. Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume") Reviewed-by: Jianqun Xu Reviewed-by: Heiko Stuebner Signed-off-by: Wang Panzhenzhuan Signed-off-by: Jianqun Xu Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit f34769a0b8d6887103305374c4a02bcd295ef9c7 Author: Greg Thelen Date: Tue Mar 30 18:19:10 2021 +0000 mm: writeback: use exact memcg dirty counts commit 0b3d6e6f2dd0a7b697b1aa8c167265908940624b upstream. Since commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting") memcg dirty and writeback counters are managed as: 1) per-memcg per-cpu values in range of [-32..32] 2) per-memcg atomic counter When a per-cpu counter cannot fit in [-32..32] it's flushed to the atomic. Stat readers only check the atomic. Thus readers such as balance_dirty_pages() may see a nontrivial error margin: 32 pages per cpu. Assuming 100 cpus: 4k x86 page_size: 13 MiB error per memcg 64k ppc page_size: 200 MiB error per memcg Considering that dirty+writeback are used together for some decisions the errors double. This inaccuracy can lead to undeserved oom kills. One nasty case is when all per-cpu counters hold positive values offsetting an atomic negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32). balance_dirty_pages() only consults the atomic and does not consider throttling the next n_cpu*32 dirty pages. If the file_lru is in the 13..200 MiB range then there's absolutely no dirty throttling, which burdens vmscan with only dirty+writeback pages thus resorting to oom kill. It could be argued that tiny containers are not supported, but it's more subtle. It's the amount the space available for file lru that matters. If a container has memory.max-200MiB of non reclaimable memory, then it will also suffer such oom kills on a 100 cpu machine. The following test reliably ooms without this patch. This patch avoids oom kills. $ cat test mount -t cgroup2 none /dev/cgroup cd /dev/cgroup echo +io +memory > cgroup.subtree_control mkdir test cd test echo 10M > memory.max (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo) (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100) $ cat memcg-writeback-stress.c /* * Dirty pages from all but one cpu. * Clean pages from the non dirtying cpu. * This is to stress per cpu counter imbalance. * On a 100 cpu machine: * - per memcg per cpu dirty count is 32 pages for each of 99 cpus * - per memcg atomic is -99*32 pages * - thus the complete dirty limit: sum of all counters 0 * - balance_dirty_pages() only sees atomic count -99*32 pages, which * it max()s to 0. * - So a workload can dirty -99*32 pages before balance_dirty_pages() * cares. */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include static char *buf; static int bufSize; static void set_affinity(int cpu) { cpu_set_t affinity; CPU_ZERO(&affinity); CPU_SET(cpu, &affinity); if (sched_setaffinity(0, sizeof(affinity), &affinity)) err(1, "sched_setaffinity"); } static void dirty_on(int output_fd, int cpu) { int i, wrote; set_affinity(cpu); for (i = 0; i < 32; i++) { for (wrote = 0; wrote < bufSize; ) { int ret = write(output_fd, buf+wrote, bufSize-wrote); if (ret == -1) err(1, "write"); wrote += ret; } } } int main(int argc, char **argv) { int cpu, flush_cpu = 1, output_fd; const char *output; if (argc != 2) errx(1, "usage: output_file"); output = argv[1]; bufSize = getpagesize(); buf = malloc(getpagesize()); if (buf == NULL) errx(1, "malloc failed"); output_fd = open(output, O_CREAT|O_RDWR); if (output_fd == -1) err(1, "open(%s)", output); for (cpu = 0; cpu < get_nprocs(); cpu++) { if (cpu != flush_cpu) dirty_on(output_fd, cpu); } set_affinity(flush_cpu); if (fsync(output_fd)) err(1, "fsync(%s)", output); if (close(output_fd)) err(1, "close(%s)", output); free(buf); } Make balance_dirty_pages() and wb_over_bg_thresh() work harder to collect exact per memcg counters. This avoids the aforementioned oom kills. This does not affect the overhead of memory.stat, which still reads the single atomic counter. Why not use percpu_counter? memcg already handles cpus going offline, so no need for that overhead from percpu_counter. And the percpu_counter spinlocks are more heavyweight than is required. It probably also makes sense to use exact dirty and writeback counters in memcg oom reports. But that is saved for later. Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com Signed-off-by: Greg Thelen Reviewed-by: Roman Gushchin Acked-by: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Cc: Tejun Heo Cc: [4.16+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6f599379fd3a9a9ea4eb10f4f8e7dc74cf2ec249 Author: Roman Gushchin Date: Tue Mar 30 18:19:09 2021 +0000 mm: fix oom_kill event handling commit fe6bdfc8e1e131720abbe77a2eb990c94c9024cb upstream. Commit e27be240df53 ("mm: memcg: make sure memory.events is uptodate when waking pollers") converted most of memcg event counters to per-memcg atomics, which made them less confusing for a user. The "oom_kill" counter remained untouched, so now it behaves differently than other counters (including "oom"). This adds nothing but confusion. Let's fix this by adding the MEMCG_OOM_KILL event, and follow the MEMCG_OOM approach. This also removes a hack from count_memcg_event_mm(), introduced earlier specially for the OOM_KILL counter. [akpm@linux-foundation.org: fix for droppage of memcg-replace-mm-owner-with-mm-memcg.patch] Link: http://lkml.kernel.org/r/20180508124637.29984-1-guro@fb.com Signed-off-by: Roman Gushchin Acked-by: Konstantin Khlebnikov Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [fllinden@amazon.com: backport to 4.14, minor contextual changes] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ad6e2898e66e324ed6d386d6a29b0e9a9103670c Author: Aaron Lu Date: Tue Mar 30 18:19:08 2021 +0000 mem_cgroup: make sure moving_account, move_lock_task and stat_cpu in the same cacheline commit e81bf9793b1861d74953ef041b4f6c7faecc2dbd upstream. The LKP robot found a 27% will-it-scale/page_fault3 performance regression regarding commit e27be240df53("mm: memcg: make sure memory.events is uptodate when waking pollers"). What the test does is: 1 mkstemp() a 128M file on a tmpfs; 2 start $nr_cpu processes, each to loop the following: 2.1 mmap() this file in shared write mode; 2.2 write 0 to this file in a PAGE_SIZE step till the end of the file; 2.3 unmap() this file and repeat this process. 3 After 5 minutes, check how many loops they managed to complete, the higher the better. The commit itself looks innocent enough as it merely changed some event counting mechanism and this test didn't trigger those events at all. Perf shows increased cycles spent on accessing root_mem_cgroup->stat_cpu in count_memcg_event_mm()(called by handle_mm_fault()) and in __mod_memcg_state() called by page_add_file_rmap(). So it's likely due to the changed layout of 'struct mem_cgroup' that either make stat_cpu falling into a constantly modifying cacheline or some hot fields stop being in the same cacheline. I verified this by moving memory_events[] back to where it was: : --- a/include/linux/memcontrol.h : +++ b/include/linux/memcontrol.h : @@ -205,7 +205,6 @@ struct mem_cgroup { : int oom_kill_disable; : : /* memory.events */ : - atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS]; : struct cgroup_file events_file; : : /* protect arrays of thresholds */ : @@ -238,6 +237,7 @@ struct mem_cgroup { : struct mem_cgroup_stat_cpu __percpu *stat_cpu; : atomic_long_t stat[MEMCG_NR_STAT]; : atomic_long_t events[NR_VM_EVENT_ITEMS]; : + atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS]; : : unsigned long socket_pressure; And performance restored. Later investigation found that as long as the following 3 fields moving_account, move_lock_task and stat_cpu are in the same cacheline, performance will be good. To avoid future performance surprise by other commits changing the layout of 'struct mem_cgroup', this patch makes sure the 3 fields stay in the same cacheline. One concern of this approach is, moving_account and move_lock_task could be modified when a process changes memory cgroup while stat_cpu is a always read field, it might hurt to place them in the same cacheline. I assume it is rare for a process to change memory cgroup so this should be OK. Link: https://lkml.kernel.org/r/20180528114019.GF9904@yexl-desktop Link: http://lkml.kernel.org/r/20180601071115.GA27302@intel.com Signed-off-by: Aaron Lu Reported-by: kernel test robot Cc: Johannes Weiner Cc: Michal Hocko Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 09031a8b68be05a0cc05312f95b347d489d331eb Author: Johannes Weiner Date: Tue Mar 30 18:19:07 2021 +0000 mm: memcg: make sure memory.events is uptodate when waking pollers commit e27be240df53f1a20c659168e722b5d9f16cc7f4 upstream. Commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting") added per-cpu drift to all memory cgroup stats and events shown in memory.stat and memory.events. For memory.stat this is acceptable. But memory.events issues file notifications, and somebody polling the file for changes will be confused when the counters in it are unchanged after a wakeup. Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX, MEMCG_OOM - are sufficiently rare and high-level that we don't need per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most frequent, but they're counting invocations of reclaim, which is a complex operation that touches many shared cachelines. This splits memory.events from the generic VM events and tracks them in their own, unbuffered atomic counters. That's also cleaner, as it eliminates the ugly enum nesting of VM and cgroup events. [hannes@cmpxchg.org: "array subscript is above array bounds"] Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting") Signed-off-by: Johannes Weiner Reported-by: Tejun Heo Acked-by: Tejun Heo Acked-by: Michal Hocko Cc: Vladimir Davydov Cc: Roman Gushchin Cc: Rik van Riel Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit cfc5a8f43e6e155262af9e05b105427126ab99dd Author: Johannes Weiner Date: Tue Mar 30 18:19:06 2021 +0000 mm: memcontrol: fix NR_WRITEBACK leak in memcg and system stats commit c3cc39118c3610eb6ab4711bc624af7fc48a35fe upstream. After commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting"), we observed slowly upward creeping NR_WRITEBACK counts over the course of several days, both the per-memcg stats as well as the system counter in e.g. /proc/meminfo. The conversion from full per-cpu stat counts to per-cpu cached atomic stat counts introduced an irq-unsafe RMW operation into the updates. Most stat updates come from process context, but one notable exception is the NR_WRITEBACK counter. While writebacks are issued from process context, they are retired from (soft)irq context. When writeback completions interrupt the RMW counter updates of new writebacks being issued, the decs from the completions are lost. Since the global updates are routed through the joint lruvec API, both the memcg counters as well as the system counters are affected. This patch makes the joint stat and event API irq safe. Link: http://lkml.kernel.org/r/20180203082353.17284-1-hannes@cmpxchg.org Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting") Signed-off-by: Johannes Weiner Debugged-by: Tejun Heo Reviewed-by: Rik van Riel Reviewed-by: Andrew Morton Cc: Vladimir Davydov Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 323900f695e077fefed1680b1e6c636ec95fdc57 Author: Tetsuo Handa Date: Sun Mar 21 23:37:49 2021 +0900 reiserfs: update reiserfs_xattrs_initialized() condition commit 5e46d1b78a03d52306f21f77a4e4a144b6d31486 upstream. syzbot is reporting NULL pointer dereference at reiserfs_security_init() [1], for commit ab17c4f02156c4f7 ("reiserfs: fixup xattr_root caching") is assuming that REISERFS_SB(s)->xattr_root != NULL in reiserfs_xattr_jcreate_nblocks() despite that commit made REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL case possible. I guess that commit 6cb4aff0a77cc0e6 ("reiserfs: fix oops while creating privroot with selinux enabled") wanted to check xattr_root != NULL before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking about the xattr root. The issue is that while creating the privroot during mount reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which dereferences the xattr root. The xattr root doesn't exist, so we get an oops. Therefore, update reiserfs_xattrs_initialized() to check both the privroot and the xattr root. Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1] Reported-and-tested-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 6cb4aff0a77c ("reiserfs: fix oops while creating privroot with selinux enabled") Acked-by: Jeff Mahoney Acked-by: Jan Kara Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit e357ab38bd821ab6bde607c41a58de309985aea6 Author: Xℹ Ruoyao Date: Tue Mar 30 23:33:34 2021 +0800 drm/amdgpu: check alignment on CPU page for bo map commit e3512fb67093fabdf27af303066627b921ee9bd8 upstream. The page table of AMDGPU requires an alignment to CPU page so we should check ioctl parameters for it. Return -EINVAL if some parameter is unaligned to CPU page, instead of corrupt the page table sliently. Reviewed-by: Christian König Signed-off-by: Xi Ruoyao Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 495751bbd8980e30c4802f128f1848a930d4b18f Author: Nirmoy Das Date: Fri Mar 26 16:08:10 2021 +0100 drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings() commit 5e61b84f9d3ddfba73091f9fbc940caae1c9eb22 upstream. Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 40f7d9ada9e3843a108c1cd71af42299ffc96592 Author: Ilya Lipnitskiy Date: Mon Mar 29 21:42:08 2021 -0700 mm: fix race by making init_zero_pfn() early_initcall commit e720e7d0e983bf05de80b231bccc39f1487f0f16 upstream. There are code paths that rely on zero_pfn to be fully initialized before core_initcall. For example, wq_sysfs_init() is a core_initcall function that eventually results in a call to kernel_execve, which causes a page fault with a subsequent mmput. If zero_pfn is not initialized by then it may not get cleaned up properly and result in an error: BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1 Here is an analysis of the race as seen on a MIPS device. On this particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until initialized, at which point it becomes PFN 5120: 1. wq_sysfs_init calls into kobject_uevent_env at core_initcall: kobject_uevent_env+0x7e4/0x7ec kset_register+0x68/0x88 bus_register+0xdc/0x34c subsys_virtual_register+0x34/0x78 wq_sysfs_init+0x1c/0x4c do_one_initcall+0x50/0x1a8 kernel_init_freeable+0x230/0x2c8 kernel_init+0x10/0x100 ret_from_kernel_thread+0x14/0x1c 2. kobject_uevent_env() calls call_usermodehelper_exec() which executes kernel_execve asynchronously. 3. Memory allocations in kernel_execve cause a page fault, bumping the MM reference counter: add_mm_counter_fast+0xb4/0xc0 handle_mm_fault+0x6e4/0xea0 __get_user_pages.part.78+0x190/0x37c __get_user_pages_remote+0x128/0x360 get_arg_page+0x34/0xa0 copy_string_kernel+0x194/0x2a4 kernel_execve+0x11c/0x298 call_usermodehelper_exec_async+0x114/0x194 4. In case zero_pfn has not been initialized yet, zap_pte_range does not decrement the MM_ANONPAGES RSS counter and the BUG message is triggered shortly afterwards when __mmdrop checks the ref counters: __mmdrop+0x98/0x1d0 free_bprm+0x44/0x118 kernel_execve+0x160/0x1d8 call_usermodehelper_exec_async+0x114/0x194 ret_from_kernel_thread+0x14/0x1c To avoid races such as described above, initialize init_zero_pfn at early_initcall level. Depending on the architecture, ZERO_PAGE is either constant or gets initialized even earlier, at paging_init, so there is no issue with initializing zero_pfn earlier. Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com Signed-off-by: Ilya Lipnitskiy Cc: Hugh Dickins Cc: "Eric W. Biederman" Cc: stable@vger.kernel.org Tested-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2640938c661e2131e0d573a5572fdbfdc10039f4 Author: Steven Rostedt (VMware) Date: Thu Apr 1 13:54:40 2021 -0400 tracing: Fix stack trace event size commit 9deb193af69d3fd6dd8e47f292b67c805a787010 upstream. Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace event so that user space could parse it properly. Originally the stack trace format to user space showed that the called stack was a dynamic array. But it is not actually a dynamic array, in the way that other dynamic event arrays worked, and this broke user space parsing for it. The update was to make the array look to have 8 entries in it. Helper functions were added to make it parse it correctly, as the stack was dynamic, but was determined by the size of the event stored. Although this fixed user space on how it read the event, it changed the internal structure used for the stack trace event. It changed the array size from [0] to [8] (added 8 entries). This increased the size of the stack trace event by 8 words. The size reserved on the ring buffer was the size of the stack trace event plus the number of stack entries found in the stack trace. That commit caused the amount to be 8 more than what was needed because it did not expect the caller field to have any size. This produced 8 entries of garbage (and reading random data) from the stack trace event: -0 [002] d... 1976396.837549: => trace_event_raw_event_sched_switch => __traceiter_sched_switch => __schedule => schedule_idle => do_idle => cpu_startup_entry => secondary_startup_64_no_verify => 0xc8c5e150ffff93de => 0xffff93de => 0 => 0 => 0xc8c5e17800000000 => 0x1f30affff93de => 0x00000004 => 0x200000000 Instead, subtract the size of the caller field from the size of the event to make sure that only the amount needed to store the stack trace is reserved. Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/ Cc: stable@vger.kernel.org Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly") Reported-by: Vasily Gorbik Tested-by: Vasily Gorbik Acked-by: Vasily Gorbik Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 18f8d1f553855f7beec00ee8235247a8c8191415 Author: Hui Wang Date: Sat Mar 20 17:15:42 2021 +0800 ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook commit e54f30befa7990b897189b44a56c1138c6bfdbb5 upstream. We found the alc_update_headset_mode() is not called on some machines when unplugging the headset, as a result, the mode of the ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type is not cleared, if users plug a differnt type of headset next time, the determine_headset_type() will not be called and the audio jack is set to the headset type of previous time. On the Dell machines which connect the dmic to the PCH, if we open the gnome-sound-setting and unplug the headset, this issue will happen. Those machines disable the auto-mute by ucm and has no internal mic in the input source, so the update_headset_mode() will not be called by cap_sync_hook or automute_hook when unplugging, and because the gnome-sound-setting is opened, the codec will not enter the runtime_suspend state, so the update_headset_mode() will not be called by alc_resume when unplugging. In this case the hp_automute_hook is called when unplugging, so add update_headset_mode() calling to this function. Cc: Signed-off-by: Hui Wang Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f88cacc351ddf3a7ec8c8ef40ab83e7e28f36c02 Author: Hui Wang Date: Sat Mar 20 17:15:41 2021 +0800 ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO commit febf22565549ea7111e7d45e8f2d64373cc66b11 upstream. We found a recording issue on a Dell AIO, users plug a headset-mic and select headset-mic from UI, but can't record any sound from headset-mic. The root cause is the determine_headset_type() returns a wrong type, e.g. users plug a ctia type headset, but that function returns omtp type. On this machine, the internal mic is not connected to the codec, the "Input Source" is headset mic by default. And when users plug a headset, the determine_headset_type() will be called immediately, the codec on this AIO is alc274, the delay time for this codec in the determine_headset_type() is only 80ms, the delay is too short to correctly determine the headset type, the fail rate is nearly 99% when users plug the headset with the normal speed. Other codecs set several hundred ms delay time, so here I change the delay time to 850ms for alc2x4 series, after this change, the fail rate is zero unless users plug the headset slowly on purpose. Cc: Signed-off-by: Hui Wang Link: https://lore.kernel.org/r/20210320091542.6748-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 90e3a4a4434c164d810c3b00676ef95031d543c9 Author: Ikjoon Jang Date: Wed Mar 24 18:51:52 2021 +0800 ALSA: usb-audio: Apply sample rate quirk to Logitech Connect commit 625bd5a616ceda4840cd28f82e957c8ced394b6a upstream. Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request. This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang Cc: Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 64cf6c3156a5cbd9c29f54370b801b336d2f7894 Author: Jesper Dangaard Brouer Date: Tue Feb 9 14:38:09 2021 +0100 bpf: Remove MTU check in __bpf_skb_max_len commit 6306c1189e77a513bf02720450bb43bd4ba5d8ae upstream. Multiple BPF-helpers that can manipulate/increase the size of the SKB uses __bpf_skb_max_len() as the max-length. This function limit size against the current net_device MTU (skb->dev->mtu). When a BPF-prog grow the packet size, then it should not be limited to the MTU. The MTU is a transmit limitation, and software receiving this packet should be allowed to increase the size. Further more, current MTU check in __bpf_skb_max_len uses the MTU from ingress/current net_device, which in case of redirects uses the wrong net_device. This patch keeps a sanity max limit of SKB_MAX_ALLOC (16KiB). The real limit is elsewhere in the system. Jesper's testing[1] showed it was not possible to exceed 8KiB when expanding the SKB size via BPF-helper. The limiting factor is the define KMALLOC_MAX_CACHE_SIZE which is 8192 for SLUB-allocator (CONFIG_SLUB) in-case PAGE_SIZE is 4096. This define is in-effect due to this being called from softirq context see code __gfp_pfmemalloc_flags() and __do_kmalloc_node(). Jakub's testing showed that frames above 16KiB can cause NICs to reset (but not crash). Keep this sanity limit at this level as memory layer can differ based on kernel config. [1] https://github.com/xdp-project/bpf-examples/tree/master/MTU-tests Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/161287788936.790810.2937823995775097177.stgit@firesoul Signed-off-by: Greg Kroah-Hartman commit 462634ba1a0d1208635a2185f4aa5d79e19ae13d Author: Tong Zhang Date: Mon Feb 15 14:17:56 2021 -0500 net: wan/lmc: unregister device when no matching device is found [ Upstream commit 62e69bc419772638369eff8ff81340bde8aceb61 ] lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by: Tong Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8194423fdaf873beb0804f127ec00999211750dc Author: Doug Brown Date: Thu Feb 11 21:27:54 2021 -0800 appletalk: Fix skb allocation size in loopback case [ Upstream commit 39935dccb21c60f9bbf1bb72d22ab6fd14ae7705 ] If a DDP broadcast packet is sent out to a non-gateway target, it is also looped back. There is a potential for the loopback device to have a longer hardware header length than the original target route's device, which can result in the skb not being created with enough room for the loopback device's hardware header. This patch fixes the issue by determining that a loopback will be necessary prior to allocating the skb, and if so, ensuring the skb has enough room. This was discovered while testing a new driver that creates a LocalTalk network interface (LTALK_HLEN = 1). It caused an skb_under_panic. Signed-off-by: Doug Brown Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a348e106fcacc93b71551a9e1ace0de651586a71 Author: Nathan Rossi Date: Thu Feb 11 05:17:57 2021 +0000 net: ethernet: aquantia: Handle error cleanup of start on open [ Upstream commit 8a28af7a3e85ddf358f8c41e401a33002f7a9587 ] The aq_nic_start function can fail in a variety of cases which leaves the device in broken state. An example case where the start function fails is the request_threaded_irq which can be interrupted, resulting in a EINTR result. This can be manually triggered by bringing the link up (e.g. ip link set up) and triggering a SIGINT on the initiating process (e.g. Ctrl+C). This would put the device into a half configured state. Subsequently bringing the link up again would cause the napi_enable to BUG. In order to correctly clean up the failed attempt to start a device call aq_nic_stop. Signed-off-by: Nathan Rossi Reviewed-by: Igor Russkikh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit bd68155a1f236149896ad8d9f2d9a4e87affc520 Author: Luca Pesce Date: Thu Dec 24 11:51:59 2020 +0100 brcmfmac: clear EAP/association status bits on linkdown events [ Upstream commit e862a3e4088070de352fdafe9bd9e3ae0a95a33c ] This ensure that previous association attempts do not leave stale statuses on subsequent attempts. This fixes the WARN_ON(!cr->bss)) from __cfg80211_connect_result() when connecting to an AP after a previous connection failure (e.g. where EAP fails due to incorrect psk but association succeeded). In some scenarios, indeed, brcmf_is_linkup() was reporting a link up event too early due to stale BRCMF_VIF_STATUS_ASSOC_SUCCESS bit, thus reporting to cfg80211 a connection result with a zeroed bssid (vif->profile.bssid is still empty), causing the WARN_ON due to the call to cfg80211_get_bss() with the empty bssid. Signed-off-by: Luca Pesce Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1608807119-21785-1-git-send-email-luca.pesce@vimar.com Signed-off-by: Sasha Levin commit d962f1b4ef54592c646e57c213f328a5350c0a14 Author: zhangyi (F) Date: Wed Mar 3 21:17:03 2021 +0800 ext4: do not iput inode under running transaction in ext4_rename() [ Upstream commit 5dccdc5a1916d4266edd251f20bbbb113a5c495f ] In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput(). Signed-off-by: zhangyi (F) Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 8b35f141b163e278d754c40635830ceaeb09f751 Author: Sameer Pujar Date: Mon Mar 15 23:01:32 2021 +0530 ASoC: rt5659: Update MCLK rate in set_sysclk() [ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ] Simple-card/audio-graph-card drivers do not handle MCLK clock when it is specified in the codec device node. The expectation here is that, the codec should actually own up the MCLK clock and do necessary setup in the driver. Suggested-by: Mark Brown Suggested-by: Michael Walle Signed-off-by: Sameer Pujar Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit a58b76a34406306797072f2a4521b99929d08fe9 Author: Tong Zhang Date: Mon Mar 15 15:58:12 2021 -0400 staging: comedi: cb_pcidas64: fix request_irq() warn [ Upstream commit d2d106fe3badfc3bf0dd3899d1c3f210c7203eab ] request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq() [ 1.565966] name 'pci-das6402/16' [ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.574200] Call Trace: [ 1.574722] proc_mkdir+0x18/0x20 [ 1.576629] request_threaded_irq+0xfe/0x160 [ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64] Suggested-by: Ian Abbott Reviewed-by: Ian Abbott Signed-off-by: Tong Zhang Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 775ddfceec18506b668c1ab32fc18e53b33aae8c Author: Tong Zhang Date: Mon Mar 15 15:59:14 2021 -0400 staging: comedi: cb_pcidas: fix request_irq() warn [ Upstream commit 2e5848a3d86f03024ae096478bdb892ab3d79131 ] request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq() [ 1.630764] name 'pci-das1602/16' [ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.639441] Call Trace: [ 1.639976] proc_mkdir+0x18/0x20 [ 1.641946] request_threaded_irq+0xfe/0x160 [ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas] Suggested-by: Ian Abbott Reviewed-by: Ian Abbott Signed-off-by: Tong Zhang Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bd784f97e1a498308c7d8496f116c0216b3532b3 Author: Alexey Dobriyan Date: Sun Mar 14 18:32:46 2021 +0300 scsi: qla2xxx: Fix broken #endif placement [ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ] Only half of the file is under include guard because terminating #endif is placed too early. Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani Signed-off-by: Alexey Dobriyan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit e022f0940d179c8a9850d2c805f7a42fcfce11b6 Author: Lv Yunlong Date: Wed Mar 10 22:46:36 2021 -0800 scsi: st: Fix a use after free in st_open() [ Upstream commit c8c165dea4c8f5ad67b1240861e4f6c5395fa4ac ] In st_open(), if STp->in_use is true, STp will be freed by scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is better to DEBC_printk() before scsi_tape_put(). Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn Acked-by: Kai Mäkisara Signed-off-by: Lv Yunlong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 9fc708819ac5a4bdce2a1bd12bd882c8e4189e3f Author: Laurent Vivier Date: Fri Mar 12 15:09:13 2021 +0100 vhost: Fix vhost_vq_reset() [ Upstream commit beb691e69f4dec7bfe8b81b509848acfd1f0dbf9 ] vhost_reset_is_le() is vhost_init_is_le(), and in the case of cross-endian legacy, vhost_init_is_le() depends on vq->user_be. vq->user_be is set by vhost_disable_cross_endian(). But in vhost_vq_reset(), we have: vhost_reset_is_le(vq); vhost_disable_cross_endian(vq); And so user_be is used before being set. To fix that, reverse the lines order as there is no other dependency between them. Signed-off-by: Laurent Vivier Link: https://lore.kernel.org/r/20210312140913.788592-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit a3e7104639f20bfc4556d6822af236423a578ef6 Author: Christophe Leroy Date: Wed Mar 10 12:10:34 2021 +0000 powerpc: Force inlining of cpu_has_feature() to avoid build failure [ Upstream commit eed5fae00593ab9d261a0c1ffc1bdb786a87a55a ] The code relies on constant folding of cpu_has_feature() based on possible and always true values as defined per CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE. Build failure is encountered with for instance book3e_all_defconfig on kisskb in the AMDGPU driver which uses cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling kernel_enable_vsx() or not. The failure is due to cpu_has_feature() not being inlined with that configuration with gcc 4.9. In the same way as commit acdad8fb4a15 ("powerpc: Force inlining of mmu_has_feature to fix build failure"), for inlining of cpu_has_feature(). Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin commit 67bf16c48593aa7de60391ba3bca4ded2375af60 Author: Lucas Tanure Date: Fri Mar 5 17:34:32 2021 +0000 ASoC: cs42l42: Always wait at least 3ms after reset [ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ] This delay is part of the power-up sequence defined in the datasheet. A runtime_resume is a power-up so must also include the delay. Signed-off-by: Lucas Tanure Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 4acbc6604be8d73b67479bc4f605d0f3aff4c9ba Author: Lucas Tanure Date: Fri Mar 5 17:34:30 2021 +0000 ASoC: cs42l42: Fix mixer volume control [ Upstream commit 72d904763ae6a8576e7ad034f9da4f0e3c44bf24 ] The minimum value is 0x3f (-63dB), which also is mute Signed-off-by: Lucas Tanure Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 16966e8c7336c4ec8ecf71af25eac93af0e5ab90 Author: Hans de Goede Date: Sun Feb 28 17:04:41 2021 +0100 ASoC: es8316: Simplify adc_pga_gain_tlv table [ Upstream commit bb18c678754ce1514100fb4c0bf6113b5af36c48 ] Most steps in this table are steps of 3dB (300 centi-dB), so we can simplify the table. This not only reduces the amount of space it takes inside the kernel, this also makes alsa-lib's mixer code actually accept the table, where as before this change alsa-lib saw the "ADC PGA Gain" control as a control without a dB scale. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit f83e0ef9939e7a90bceef25f9ba39d07be876546 Author: Benjamin Rood Date: Fri Feb 19 13:33:08 2021 -0500 ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe [ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ] According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has the following bit field definitions: | BITS | FIELD | RW | RESET | DEFINITION | | 15 | RSVD | RO | 0x0 | Reserved | | 14 | RSVD | RW | 0x1 | Reserved | | 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode | | 11:10 | RSVD | RO | 0x0 | Reserved | | 9:8 | LBI_RESP | RW | 0x1 | Integrator Response | | 7:6 | RSVD | RO | 0x0 | Reserved | | 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode | | 4:1 | RSVD | RO | 0x0 | Reserved | | 0 | EN | RW | 0x0 | Enable/Disable AVC | The original default value written to the DAP_AVC_CTRL register during sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to bits 4 and 10, which are defined as RESERVED. It would also not set bits 12 and 14 to their correct RESET values of 0x1, and instead set them to 0x0. While the DAP_AVC module is effectively disabled because the EN bit is 0, this default value is still writing invalid values to registers that are marked as read-only and RESERVED as well as not setting bits 12 and 14 to their correct default values as defined by the datasheet. The correct value that should be written to the DAP_AVC_CTRL register is 0x5100, which configures the register bits to the default values defined by the datasheet, and prevents any writes to bits defined as 'read-only'. Generally speaking, it is best practice to NOT attempt to write values to registers/bits defined as RESERVED, as it generally produces unwanted/undefined behavior, or errors. Also, all credit for this patch should go to my colleague Dan MacDonald for finding this error in the first place. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Signed-off-by: Benjamin Rood Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0e1e1afa70d86cebf5d771f68c2ad3ce84d91354 Author: Hans de Goede Date: Fri Feb 26 15:38:14 2021 +0100 ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10 [ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ] The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3ad11d6ad3006677d60d03437b8d8473e53f6174 Author: Hans de Goede Date: Fri Feb 26 15:38:13 2021 +0100 ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10 [ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ] The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 863b8879a90b3cc668c13caeebf6a7e4850b739b Author: J. Bruce Fields Date: Tue Mar 2 10:48:38 2021 -0500 rpc: fix NULL dereference on kmalloc failure [ Upstream commit 0ddc942394013f08992fc379ca04cffacbbe3dae ] I think this is unlikely but possible: svc_authenticate sets rq_authop and calls svcauth_gss_accept. The kmalloc(sizeof(*svcdata), GFP_KERNEL) fails, leaving rq_auth_data NULL, and returning SVC_DENIED. This causes svc_process_common to go to err_bad_auth, and eventually call svc_authorise. That calls ->release == svcauth_gss_release, which tries to dereference rq_auth_data. Signed-off-by: J. Bruce Fields Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracle.com/T/#t Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit b3234384a256c8ac160cb0f5ae2c6528b9c32668 Author: Zhaolong Zhang Date: Tue Mar 2 17:42:31 2021 +0800 ext4: fix bh ref count on error paths [ Upstream commit c915fb80eaa6194fa9bd0a4487705cd5b0dda2f1 ] __ext4_journalled_writepage should drop bhs' ref count on error paths Signed-off-by: Zhaolong Zhang Link: https://lore.kernel.org/r/1614678151-70481-1-git-send-email-zhangzl2013@126.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 365c1c4583cff40401f43ccc7bba440d20adbe0e Author: Jakub Kicinski Date: Wed Mar 17 09:55:15 2021 -0700 ipv6: weaken the v4mapped source check [ Upstream commit dcc32f4f183ab8479041b23a1525d48233df1d43 ] This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3. Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") introduced an input check against v4mapped addresses. Use of such addresses on the wire is indeed questionable and not allowed on public Internet. As the commit pointed out https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02 lists potential issues. Unfortunately there are applications which use v4mapped addresses, and breaking them is a clear regression. For example v4mapped addresses (or any semi-valid addresses, really) may be used for uni-direction event streams or packet export. Since the issue which sparked the addition of the check was with TCP and request_socks in particular push the check down to TCPv6 and DCCP. This restores the ability to receive UDPv6 packets with v4mapped address as the source. Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the user-visible changes. Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") Reported-by: Sunyi Shao Signed-off-by: Jakub Kicinski Acked-by: Mat Martineau Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8569d30b846ac19680cdb1bd1785f6783be99745 Author: David Brazdil Date: Mon Mar 29 18:24:43 2021 +0000 selinux: vsock: Set SID for socket returned by accept() [ Upstream commit 1f935e8e72ec28dddb2dc0650b3b6626a293d94b ] For AF_VSOCK, accept() currently returns sockets that are unlabelled. Other socket families derive the child's SID from the SID of the parent and the SID of the incoming packet. This is typically done as the connected socket is placed in the queue that accept() removes from. Reuse the existing 'security_sk_clone' hook to copy the SID from the parent (server) socket to the child. There is no packet SID in this case. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: David Brazdil Signed-off-by: David S. Miller Signed-off-by: Sasha Levin