/* * Copyright © 2009 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Zhenyu Wang * Wu Fengguang * */ #include #include #include #include #include #include #include #include #include #include #include #include "reg_dumper.h" #include "../i810_reg.h" #define dump_reg(reg, desc) \ do { \ dword = INREG(reg); \ printf("%-18s 0x%08x %s\n", # reg, dword, desc); \ } while (0) #define BITSTO(n) (n >= sizeof(long) * 8 ? ~0 : (1UL << (n)) - 1) #define BITMASK(high, low) (BITSTO(high+1) & ~BITSTO(low)) #define BITS(reg, high, low) (((reg) & (BITMASK(high, low))) >> (low)) #define BIT(reg, n) BITS(reg, n, n) #define AUD_CONFIG 0x62000 #define AUD_DEBUG 0x62010 #define AUD_VID_DID 0x62020 #define AUD_RID 0x62024 #define AUD_SUBN_CNT 0x62028 #define AUD_FUNC_GRP 0x62040 #define AUD_SUBN_CNT2 0x62044 #define AUD_GRP_CAP 0x62048 #define AUD_PWRST 0x6204c #define AUD_SUPPWR 0x62050 #define AUD_SID 0x62054 #define AUD_OUT_CWCAP 0x62070 #define AUD_OUT_PCMSIZE 0x62074 #define AUD_OUT_STR 0x62078 #define AUD_OUT_DIG_CNVT 0x6207c #define AUD_OUT_CH_STR 0x62080 #define AUD_OUT_STR_DESC 0x62084 #define AUD_PINW_CAP 0x620a0 #define AUD_PIN_CAP 0x620a4 #define AUD_PINW_CONNLNG 0x620a8 #define AUD_PINW_CONNLST 0x620ac #define AUD_PINW_CNTR 0x620b0 #define AUD_PINW_UNSOLRESP 0x620b8 #define AUD_CNTL_ST 0x620b4 #define AUD_PINW_CONFIG 0x620bc #define AUD_HDMIW_STATUS 0x620d4 #define AUD_HDMIW_HDMIEDID 0x6210c #define AUD_HDMIW_INFOFR 0x62118 #define AUD_CONV_CHCNT 0x62120 #define AUD_CTS_ENABLE 0x62128 #define VIDEO_DIP_CTL 0x61170 #define VIDEO_DIP_ENABLE (1<<31) #define VIDEO_DIP_ENABLE_AVI (1<<21) #define VIDEO_DIP_ENABLE_VENDOR (1<<22) #define VIDEO_DIP_ENABLE_SPD (1<<24) #define VIDEO_DIP_BUF_AVI (0<<19) #define VIDEO_DIP_BUF_VENDOR (1<<19) #define VIDEO_DIP_BUF_SPD (3<<19) #define VIDEO_DIP_TRANS_ONCE (0<<16) #define VIDEO_DIP_TRANS_1 (1<<16) #define VIDEO_DIP_TRANS_2 (2<<16) #define AUDIO_HOTPLUG_EN (1<<24) #define min_t(type, x, y) ({ \ type __min1 = (x); \ type __min2 = (y); \ __min1 < __min2 ? __min1: __min2; }) #define OPNAME(names, index) \ names[min_t(unsigned int, index, ARRAY_SIZE(names) - 1)] static char *pixel_clock[] = { [0] = "25.2 / 1.001 MHz", [1] = "25.2 MHz", [2] = "27 MHz", [3] = "27 * 1.001 MHz", [4] = "54 MHz", [5] = "54 * 1.001 MHz", [6] = "74.25 / 1.001 MHz", [7] = "74.25 MHz", [8] = "148.5 / 1.001 MHz", [9] = "148.5 MHz", [10] = "Reserved", }; static char *power_state[] = { [0] = "D0", [1] = "D1", [2] = "D2", [3] = "D3", }; static char *stream_type[] = { [0] = "default samples", [1] = "one bit stream", [2] = "DST stream", [3] = "MLP stream", [4] = "Reserved", }; static char *dip_port[] = { [0] = "Reserved", [1] = "HDMI B", [2] = "HDMI C", [3] = "Reserved", }; static char *dip_index[] = { [0] = "Audio DIP", [1] = "ACP DIP", [2] = "ISRC1 DIP", [3] = "ISRC2 DIP", [4] = "Reserved", }; static char *dip_trans[] = { [0] = "disabled", [1] = "reserved", [2] = "send once", [3] = "best effort", }; static char *video_dip_index[] = { [0] = "AVI DIP", [1] = "Vendor-specific DIP", [2] = "Reserved", [3] = "Source Product Description DIP", }; static char *video_dip_trans[] = { [0] = "send once", [1] = "send every vsync", [2] = "send at least every other vsync", [3] = "reserved", }; static void do_self_tests(void) { if (BIT(1, 0) != 1) exit(1); if (BIT(0x80000000, 31) != 1) exit(2); if (BITS(0xc0000000, 31, 30) != 3) exit(3); } int main(int argc, char **argv) { I830Rec i830; I830Ptr pI830 = &i830; uint32_t dword; int i; do_self_tests(); intel_i830rec_init(pI830); /* printf("%-18s %8s %s\n\n", "register name", "raw value", "description"); */ #if 0 /* enable HDMI audio bits */ dump_reg(SDVOB, "Digital Display Port B Control Register"); dword |= SDVO_ENABLE; dword |= SDVO_BORDER_ENABLE; dword |= SDVO_AUDIO_ENABLE; dword |= SDVO_NULL_PACKETS_DURING_VSYNC; OUTREG(SDVOB, dword); dump_reg(PORT_HOTPLUG_EN, "Hot Plug Detect Enable"); OUTREG(PORT_HOTPLUG_EN, dword | AUDIO_HOTPLUG_EN); dump_reg(VIDEO_DIP_CTL, "Video DIP Control"); dword &= ~( VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD); OUTREG(VIDEO_DIP_CTL, dword); dword |= VIDEO_DIP_ENABLE; OUTREG(VIDEO_DIP_CTL, dword); #endif #if 0 /* disable HDMI audio bits */ dump_reg(SDVOB, "Digital Display Port B Control Register"); dword &= ~SDVO_AUDIO_ENABLE; dword &= ~SDVO_NULL_PACKETS_DURING_VSYNC; OUTREG(SDVOB, dword); #endif dump_reg(VIDEO_DIP_CTL, "Video DIP Control"); dump_reg(SDVOB, "Digital Display Port B Control Register"); dump_reg(SDVOC, "Digital Display Port C Control Register"); dump_reg(PORT_HOTPLUG_EN, "Hot Plug Detect Enable"); dump_reg(AUD_CONFIG, "Audio Configuration"); dump_reg(AUD_DEBUG, "Audio Debug"); dump_reg(AUD_VID_DID, "Audio Vendor ID / Device ID"); dump_reg(AUD_RID, "Audio Revision ID"); dump_reg(AUD_SUBN_CNT, "Audio Subordinate Node Count"); dump_reg(AUD_FUNC_GRP, "Audio Function Group Type"); dump_reg(AUD_SUBN_CNT2, "Audio Subordinate Node Count"); dump_reg(AUD_GRP_CAP, "Audio Function Group Capabilities"); dump_reg(AUD_PWRST, "Audio Power State"); dump_reg(AUD_SUPPWR, "Audio Supported Power States"); dump_reg(AUD_SID, "Audio Root Node Subsystem ID"); dump_reg(AUD_OUT_CWCAP, "Audio Output Converter Widget Capabilities"); dump_reg(AUD_OUT_PCMSIZE, "Audio PCM Size and Rates"); dump_reg(AUD_OUT_STR, "Audio Stream Formats"); dump_reg(AUD_OUT_DIG_CNVT, "Audio Digital Converter"); dump_reg(AUD_OUT_CH_STR, "Audio Channel ID and Stream ID"); dump_reg(AUD_OUT_STR_DESC, "Audio Stream Descriptor Format"); dump_reg(AUD_PINW_CAP, "Audio Pin Complex Widget Capabilities"); dump_reg(AUD_PIN_CAP, "Audio Pin Capabilities"); dump_reg(AUD_PINW_CONNLNG, "Audio Connection List Length"); dump_reg(AUD_PINW_CONNLST, "Audio Connection List Entry"); dump_reg(AUD_PINW_CNTR, "Audio Pin Widget Control"); dump_reg(AUD_PINW_UNSOLRESP,"Audio Unsolicited Response Enable"); dump_reg(AUD_CNTL_ST, "Audio Control State Register"); dump_reg(AUD_PINW_CONFIG, "Audio Configuration Default"); dump_reg(AUD_HDMIW_STATUS, "Audio HDMI Status"); dump_reg(AUD_HDMIW_HDMIEDID,"Audio HDMI Data EDID Block"); dump_reg(AUD_HDMIW_INFOFR, "Audio HDMI Widget Data Island Packet"); dump_reg(AUD_CONV_CHCNT, "Audio Converter Channel Count"); dump_reg(AUD_CTS_ENABLE, "Audio CTS Programming Enable"); printf("\nDetails:\n\n"); dword = INREG(AUD_VID_DID); printf("AUD_VID_DID vendor id\t\t\t0x%x\n", dword >> 16); printf("AUD_VID_DID device id\t\t\t0x%x\n", dword & 0xffff); dword = INREG(AUD_RID); printf("AUD_RID major revision\t\t\t0x%lx\n", BITS(dword, 23, 20)); printf("AUD_RID minor revision\t\t\t0x%lx\n", BITS(dword, 19, 16)); printf("AUD_RID revision id\t\t\t0x%lx\n", BITS(dword, 15, 8)); printf("AUD_RID stepping id\t\t\t0x%lx\n", BITS(dword, 7, 0)); dword = INREG(SDVOB); printf("SDVOB enable\t\t\t\t%u\n", !!(dword & SDVO_ENABLE)); printf("SDVOB HDMI encoding\t\t\t%u\n", !!(dword & SDVO_ENCODING_HDMI)); printf("SDVOB SDVO encoding\t\t\t%u\n", !!(dword & SDVO_ENCODING_SDVO)); printf("SDVOB null packets\t\t\t%u\n", !!(dword & SDVO_NULL_PACKETS_DURING_VSYNC)); printf("SDVOB audio enabled\t\t\t%u\n", !!(dword & SDVO_AUDIO_ENABLE)); dword = INREG(SDVOC); printf("SDVOC enable\t\t\t\t%u\n", !!(dword & SDVO_ENABLE)); printf("SDVOC HDMI encoding\t\t\t%u\n", !!(dword & SDVO_ENCODING_HDMI)); printf("SDVOC SDVO encoding\t\t\t%u\n", !!(dword & SDVO_ENCODING_SDVO)); printf("SDVOC null packets\t\t\t%u\n", !!(dword & SDVO_NULL_PACKETS_DURING_VSYNC)); printf("SDVOC audio enabled\t\t\t%u\n", !!(dword & SDVO_AUDIO_ENABLE)); dword = INREG(PORT_HOTPLUG_EN); printf("PORT_HOTPLUG_EN DisplayPort/HDMI port B\t%ld\n", BIT(dword, 29)), printf("PORT_HOTPLUG_EN DisplayPort/HDMI port C\t%ld\n", BIT(dword, 28)), printf("PORT_HOTPLUG_EN DisplayPort port D\t%ld\n", BIT(dword, 27)), printf("PORT_HOTPLUG_EN SDVOB\t\t\t%ld\n", BIT(dword, 26)), printf("PORT_HOTPLUG_EN SDVOC\t\t\t%ld\n", BIT(dword, 25)), printf("PORT_HOTPLUG_EN audio\t\t\t%ld\n", BIT(dword, 24)), printf("PORT_HOTPLUG_EN TV\t\t\t%ld\n", BIT(dword, 23)), printf("PORT_HOTPLUG_EN CRT\t\t\t%ld\n", BIT(dword, 9)), dword = INREG(VIDEO_DIP_CTL); printf("VIDEO_DIP_CTL enable graphics DIP\t%ld\n", BIT(dword, 31)), printf("VIDEO_DIP_CTL port select\t\t[0x%lx] %s\n", BITS(dword, 30, 29), dip_port[BITS(dword, 30, 29)]); printf("VIDEO_DIP_CTL DIP buffer trans active\t%lu\n", BIT(dword, 28)); printf("VIDEO_DIP_CTL AVI DIP enabled\t\t%lu\n", BIT(dword, 21)); printf("VIDEO_DIP_CTL vendor DIP enabled\t%lu\n", BIT(dword, 22)); printf("VIDEO_DIP_CTL SPD DIP enabled\t\t%lu\n", BIT(dword, 24)); printf("VIDEO_DIP_CTL DIP buffer index\t\t[0x%lx] %s\n", BITS(dword, 20, 19), video_dip_index[BITS(dword, 20, 19)]); printf("VIDEO_DIP_CTL DIP trans freq\t\t[0x%lx] %s\n", BITS(dword, 17, 16), video_dip_trans[BITS(dword, 17, 16)]); printf("VIDEO_DIP_CTL DIP buffer size\t\t%lu\n", BITS(dword, 11, 8)); printf("VIDEO_DIP_CTL DIP address\t\t%lu\n", BITS(dword, 3, 0)); dword = INREG(AUD_CONFIG); printf("AUD_CONFIG pixel clock\t\t\t[0x%lx] %s\n", BITS(dword, 19, 16), OPNAME(pixel_clock, BITS(dword, 19, 16))); printf("AUD_CONFIG fabrication enabled\t\t%lu\n", BITS(dword, 2, 2)); printf("AUD_CONFIG professional use allowed\t%lu\n", BIT(dword, 1)); printf("AUD_CONFIG fuse enabled\t\t\t%lu\n", BIT(dword, 0)); dword = INREG(AUD_DEBUG); printf("AUD_DEBUG function reset\t\t%lu\n", BIT(dword, 0)); dword = INREG(AUD_SUBN_CNT); printf("AUD_SUBN_CNT starting node number\t0x%lx\n", BITS(dword, 23, 16)); printf("AUD_SUBN_CNT total number of nodes\t0x%lx\n", BITS(dword, 7, 0)); dword = INREG(AUD_SUBN_CNT2); printf("AUD_SUBN_CNT2 starting node number\t0x%lx\n", BITS(dword, 24, 16)); printf("AUD_SUBN_CNT2 total number of nodes\t0x%lx\n", BITS(dword, 7, 0)); dword = INREG(AUD_FUNC_GRP); printf("AUD_FUNC_GRP unsol capable\t\t%lu\n", BIT(dword, 8)); printf("AUD_FUNC_GRP node type\t\t\t0x%lx\n", BITS(dword, 7, 0)); dword = INREG(AUD_GRP_CAP); printf("AUD_GRP_CAP beep 0\t\t\t%lu\n", BIT(dword, 16)); printf("AUD_GRP_CAP input delay\t\t\t%lu\n", BITS(dword, 11, 8)); printf("AUD_GRP_CAP output delay\t\t%lu\n", BITS(dword, 3, 0)); dword = INREG(AUD_PWRST); printf("AUD_PWRST device power state\t\t%s\n", power_state[BITS(dword, 5, 4)]); printf("AUD_PWRST device power state setting\t%s\n", power_state[BITS(dword, 1, 0)]); dword = INREG(AUD_SUPPWR); printf("AUD_SUPPWR support D0\t\t\t%lu\n", BIT(dword, 0)); printf("AUD_SUPPWR support D1\t\t\t%lu\n", BIT(dword, 1)); printf("AUD_SUPPWR support D2\t\t\t%lu\n", BIT(dword, 2)); printf("AUD_SUPPWR support D3\t\t\t%lu\n", BIT(dword, 3)); dword = INREG(AUD_OUT_CWCAP); printf("AUD_OUT_CWCAP widget type\t\t0x%lx\n", BITS(dword, 23, 20)); printf("AUD_OUT_CWCAP sample delay\t\t0x%lx\n", BITS(dword, 19, 16)); printf("AUD_OUT_CWCAP channel count\t\t%lu\n", BITS(dword, 15, 13) * 2 + BIT(dword, 0) + 1); printf("AUD_OUT_CWCAP L-R swap\t\t\t%lu\n", BIT(dword, 11)); printf("AUD_OUT_CWCAP power control\t\t%lu\n", BIT(dword, 10)); printf("AUD_OUT_CWCAP digital\t\t\t%lu\n", BIT(dword, 9)); printf("AUD_OUT_CWCAP conn list\t\t\t%lu\n", BIT(dword, 8)); printf("AUD_OUT_CWCAP unsol\t\t\t%lu\n", BIT(dword, 7)); printf("AUD_OUT_CWCAP mute\t\t\t%lu\n", BIT(dword, 5)); printf("AUD_OUT_CWCAP format override\t\t%lu\n", BIT(dword, 4)); printf("AUD_OUT_CWCAP amp param override\t%lu\n", BIT(dword, 3)); printf("AUD_OUT_CWCAP out amp present\t\t%lu\n", BIT(dword, 2)); printf("AUD_OUT_CWCAP in amp present\t\t%lu\n", BIT(dword, 1)); dword = INREG(AUD_OUT_DIG_CNVT); printf("AUD_OUT_DIG_CNVT SPDIF category\t\t0x%lx\n", BITS(dword, 14, 8)); printf("AUD_OUT_DIG_CNVT SPDIF level\t\t%lu\n", BIT(dword, 7)); printf("AUD_OUT_DIG_CNVT professional\t\t%lu\n", BIT(dword, 6)); printf("AUD_OUT_DIG_CNVT non PCM\t\t%lu\n", BIT(dword, 5)); printf("AUD_OUT_DIG_CNVT copyright asserted\t%lu\n", BIT(dword, 4)); printf("AUD_OUT_DIG_CNVT filter preemphasis\t%lu\n", BIT(dword, 3)); printf("AUD_OUT_DIG_CNVT validity config\t%lu\n", BIT(dword, 2)); printf("AUD_OUT_DIG_CNVT validity flag\t\t%lu\n", BIT(dword, 1)); printf("AUD_OUT_DIG_CNVT digital enable\t\t%lu\n", BIT(dword, 0)); dword = INREG(AUD_OUT_CH_STR); printf("AUD_OUT_CH_STR stream id\t\t0x%lx\n", BITS(dword, 7, 4)); printf("AUD_OUT_CH_STR lowest channel\t\t0x%lx\n", BITS(dword, 3, 0)); dword = INREG(AUD_OUT_STR_DESC); printf("AUD_OUT_STR_DESC stream channels\t0x%lx\n", BITS(dword, 3, 0)); dword = INREG(AUD_PINW_CAP); printf("AUD_PINW_CAP widget type\t\t0x%lx\n", BITS(dword, 23, 20)); printf("AUD_PINW_CAP sample delay\t\t0x%lx\n", BITS(dword, 19, 16)); printf("AUD_PINW_CAP channel count\t\t0x%lx\n", BITS(dword, 15, 13) * 2 + BIT(dword, 0)); printf("AUD_PINW_CAP HDCP\t\t\t%lu\n", BIT(dword, 12)); printf("AUD_PINW_CAP L-R swap\t\t\t%lu\n", BIT(dword, 11)); printf("AUD_PINW_CAP power control\t\t%lu\n", BIT(dword, 10)); printf("AUD_PINW_CAP digital\t\t\t%lu\n", BIT(dword, 9)); printf("AUD_PINW_CAP conn list\t\t\t%lu\n", BIT(dword, 8)); printf("AUD_PINW_CAP unsol\t\t\t%lu\n", BIT(dword, 7)); printf("AUD_PINW_CAP mute\t\t\t%lu\n", BIT(dword, 5)); printf("AUD_PINW_CAP format override\t\t%lu\n", BIT(dword, 4)); printf("AUD_PINW_CAP amp param override\t\t%lu\n", BIT(dword, 3)); printf("AUD_PINW_CAP out amp present\t\t%lu\n", BIT(dword, 2)); printf("AUD_PINW_CAP in amp present\t\t%lu\n", BIT(dword, 1)); dword = INREG(AUD_PIN_CAP); printf("AUD_PIN_CAP EAPD\t\t\t%lu\n", BIT(dword, 16)); printf("AUD_PIN_CAP HDMI\t\t\t%lu\n", BIT(dword, 7)); printf("AUD_PIN_CAP output\t\t\t%lu\n", BIT(dword, 4)); printf("AUD_PIN_CAP presence detect\t\t%lu\n", BIT(dword, 2)); dword = INREG(AUD_PINW_CNTR); printf("AUD_PINW_CNTR mute status\t\t%lu\n", BIT(dword, 8)); printf("AUD_PINW_CNTR out enable\t\t%lu\n", BIT(dword, 6)); printf("AUD_PINW_CNTR amp mute status\t\t%lu\n", BIT(dword, 8)); printf("AUD_PINW_CNTR amp mute status\t\t%lu\n", BIT(dword, 8)); printf("AUD_PINW_CNTR stream type\t\t[0x%lx] %s\n", BITS(dword, 2, 0), OPNAME(stream_type, BITS(dword, 2, 0))); dword = INREG(AUD_PINW_UNSOLRESP); printf("AUD_PINW_UNSOLRESP enable unsol resp\t%lu\n", BIT(dword, 31)); dword = INREG(AUD_CNTL_ST); printf("AUD_CNTL_ST DIP audio enabled\t\t%lu\n", BIT(dword, 21)); printf("AUD_CNTL_ST DIP ACP enabled\t\t%lu\n", BIT(dword, 22)); printf("AUD_CNTL_ST DIP ISRCx enabled\t\t%lu\n", BIT(dword, 23)); printf("AUD_CNTL_ST DIP port select\t\t[0x%lx] %s\n", BITS(dword, 30, 29), dip_port[BITS(dword, 30, 29)]); printf("AUD_CNTL_ST DIP buffer index\t\t[0x%lx] %s\n", BITS(dword, 20, 18), OPNAME(dip_index, BITS(dword, 20, 18))); printf("AUD_CNTL_ST DIP trans freq\t\t[0x%lx] %s\n", BITS(dword, 17, 16), dip_trans[BITS(dword, 17, 16)]); printf("AUD_CNTL_ST DIP address\t\t\t%lu\n", BITS(dword, 3, 0)); printf("AUD_CNTL_ST CP ready\t\t\t%lu\n", BIT(dword, 15)); printf("AUD_CNTL_ST ELD valid\t\t\t%lu\n", BIT(dword, 14)); printf("AUD_CNTL_ST ELD ack\t\t\t%lu\n", BIT(dword, 4)); printf("AUD_CNTL_ST ELD bufsize\t\t\t%lu\n", BITS(dword, 13, 9)); printf("AUD_CNTL_ST ELD address\t\t\t%lu\n", BITS(dword, 8, 5)); dword = INREG(AUD_HDMIW_STATUS); printf("AUD_HDMIW_STATUS CDCLK/DOTCLK underrun\t%lu\n", BIT(dword, 31)); printf("AUD_HDMIW_STATUS CDCLK/DOTCLK overrun\t%lu\n", BIT(dword, 30)); printf("AUD_HDMIW_STATUS BCLK/CDCLK underrun\t%lu\n", BIT(dword, 29)); printf("AUD_HDMIW_STATUS BCLK/CDCLK overrun\t%lu\n", BIT(dword, 28)); dword = INREG(AUD_CONV_CHCNT); printf("AUD_CONV_CHCNT HDMI HBR enabled\t\t%lu\n", BITS(dword, 15, 14)); printf("AUD_CONV_CHCNT HDMI channel count\t%lu\n", BITS(dword, 11, 8) + 1); printf("AUD_CONV_CHCNT HDMI channel mapping:\n"); for (i = 0; i < 8; i++) { OUTREG(AUD_CONV_CHCNT, i); dword = INREG(AUD_CONV_CHCNT); printf("\t\t\t\t\t[0x%x] %u => %lu \n", dword, i, BITS(dword, 7, 4)); } return 0; }