Multiplexing Scheme Updates for Secure Real&nbhy;time Transport Protocol (SRTP) Extension for Datagram Transport Layer Security (DTLS)Impedance Mismatchmarc@petit-huguenin.orgCisco Systems7200-12 Kit Creek RoadResearch Triangle ParkNC27709United States of Americagsalguei@cisco.com
RAI
AVTCOREThis document defines how Datagram Transport Layer Security (DTLS), Real-time Transport Protocol (RTP), RTP Control Protocol (RTCP), Session Traversal Utilities for NAT (STUN), Traversal Using Relays around NAT (TURN), and ZRTP packets are multiplexed on a single receiving socket. It overrides the guidance from RFC 5764 ("SRTP Extension for DTLS"), which suffered from four issues described and fixed in this document.This document updates RFC 5764.Section 5.1.2 of "Datagram Transport Layer
Security (DTLS) Extension to Establish Keys
for the Secure Real-time Transport Protocol (SRTP)"
defines a scheme for a Real-time Transport
Protocol (RTP) receiver to
demultiplex DTLS,
Session Traversal Utilities for NAT
(STUN),
and Secure Real-time Transport Protocol (SRTP) / Secure Real-time Transport Control Protocol (SRTCP) packets that are arriving on the
RTP port. Unfortunately, this demultiplexing scheme has created problematic issues: It implicitly allocated codepoints for new
STUN methods without an IANA registry reflecting these new
allocations.It did not take into account the fact that ZRTP
also needs to be demultiplexed with the other packet types explicitly
mentioned in Section 5.1.2 of RFC 5764.It implicitly allocated codepoints for new Transport Layer
Security (TLS) ContentTypes
without an IANA registry reflecting these new allocations.It did not take into account the fact that the Traversal Using
Relays around NAT (TURN) usage of STUN can create TURN channels that also need to be
demultiplexed with the other packet types explicitly mentioned in Section
5.1.2 of RFC 5764.Having overlapping ranges between different IANA registries becomes an
issue when a new codepoint is allocated in one of these registries without
carefully analyzing the impact it could have on the other registries when that
codepoint is demultiplexed. Among other downsides of the bad design of the
demultiplexing algorithm detailed in , it creates a
requirement for coordination between codepoint assignments where none should
exist, and that is organizationally and socially undesirable. However, RFC 5764 has been widely deployed, so there must be an awareness of this issue and how it must be dealt with. Thus, even if the feature related to a codepoint is not initially thought to be useful in the context of demultiplexing, the respective IANA registry expert should at least raise a flag when the allocated codepoint irrevocably prevents multiplexing.The first goal of this document is to make sure that future allocations in any of the affected protocols are done with the full knowledge of their impact on multiplexing. This is achieved by updating , which includes modifying the IANA registries with instructions for coordination between the protocols at risk.A second goal is to permit the addition of new protocols to the list of existing multiplexed protocols in a manner that does not break existing implementations. At the time of this writing, the flaws in the demultiplexing scheme were unavoidably inherited by other documents, such as and . So in addition, these and any other affected documents will need to be corrected with the updates this document provides. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in . The demultiplexing scheme in states that the receiver can identify the packet
type by looking at the first byte. If the value of this first byte is
0 or 1, the packet is identified to be STUN.
The problem with this implicit allocation is
that it restricts the codepoints for STUN methods (as described in
Section 18.1 of ) to values between 0x000 and 0x07F, which
in turn reduces the number of possible STUN method codepoints
assigned by IETF Review (i.e., the range 0x000 - 0x7FF) from
2048 to only 128 and eliminates the possibility of having STUN
method codepoints assigned by Designated Expert (i.e., the range
0x800 - 0xFFF).To preserve the Designated Expert range, this document allocates the values 2 and 3 to also identify STUN methods.The IANA Registry for STUN methods has been modified to mark the codepoints from 0x100 to 0xFFF as Reserved. These codepoints can still be allocated, but require IETF Review with a document that will properly evaluate the risk of an assignment overlapping with other registries. In addition, this document also updates the IANA registry such that
the STUN method codepoints assigned in the 0x080-0x0FF range are also
assigned via Designated Expert. The "STUN Methods" registry has been
changed as follows: OLD:NEW:ZRTP is a protocol for media path Diffie-Hellman
exchange to agree on a session key and parameters for establishing
unicast SRTP sessions for Voice
over IP (VoIP) applications. The ZRTP protocol is media path keying
because it is multiplexed on the same port as RTP and does not
require support in the signaling protocol.In order to prevent future documents from assigning values from the unused range to a new protocol, this document modifies the demultiplexing algorithm to properly account for ZRTP by allocating the values from 16 to 19 for this purpose.The demultiplexing scheme in dictates that if the value of the first byte is between 20 and 63 (inclusive), then the packet is identified to be DTLS. For DTLS 1.0 and DTLS 1.2 , that first byte corresponds to the TLS ContentType field. Considerations must be taken into account when assigning additional ContentTypes in the codepoint ranges 0 to 19 and 64 to 255, so this does not prevent demultiplexing when this functionality is desirable. Note that describes a narrow use of DTLS that works as long as the specific DTLS version used abides by the restrictions on the demultiplexing byte (the ones that this document imposes on the "TLS ContentType Registry"). Any extension or revision to DTLS that causes it to no longer meet these constraints should consider what values may occur in the first byte of the DTLS message and what impact it would have on the multiplexing that describes.With respect to TLS packet identification, this document explicitly adds a
warning to the codepoints from 0 to 19 and from 64 to 255 indicating that
allocations in these ranges require coordination, as described in this
document. The "TLS ContentType Registry" has been changed as follows: OLD:NEW:When used with Interactive Connectivity
Establishment (ICE), an implementation of RFC 5764 can receive
packets on the same socket from three different paths, as shown in
: Directly from
the sourceThrough a NATRelayed by a TURN
server
Even if the ICE algorithm succeeded in selecting a non-relayed path, it is still possible to receive data from the TURN server. For instance, when ICE is used with aggressive nomination, the media path can quickly change until it stabilizes. Also, freeing ICE candidates is optional, so the TURN server can restart forwarding STUN connectivity checks during an ICE restart. TURN channels are an optimization where data packets are exchanged
with a 4-byte prefix instead of the standard 36-byte STUN overhead
(see Section 2.5 of ). The problem is that
the RFC 5764 demultiplexing scheme does not define what to do with
packets received over a TURN channel since these packets will start
with a first byte whose value will be between 64 and 127 (inclusive).
If the TURN server was instructed to send data over a TURN channel,
then the demultiplexing scheme specified in RFC 5764 will reject these packets. Current implementations violate RFC 5764 for values 64 to 127 (inclusive) and they instead parse packets with such values as TURN. In order to prevent future documents from assigning values from the
unused range to a new protocol, this document modifies the
demultiplexing algorithm in RFC 5764 to properly account for TURN channels by allocating the values from 64 to 79 for this purpose. This modification restricts the TURN channel space to a more limited set of possible channels when the TURN client does the channel binding request in combination with the demultiplexing scheme described in .This document updates the text in Section 5.1.2 of as follows:OLD TEXTThe process for demultiplexing a packet is as follows. The receiver looks at the first byte of the packet. If the value of this byte is 0 or 1, then the packet is STUN. If the value is in between 128 and 191 (inclusive), then the packet is RTP (or RTCP, if both RTCP and RTP are being multiplexed over the same destination port). If the value is between 20 and 63 (inclusive), the packet is DTLS. This process is summarized in Figure 3.END OLD TEXTNEW TEXTThe process for demultiplexing a packet is as follows. The receiver looks at the first byte of the packet. If the value of this byte is in between 0 and 3 (inclusive), then the packet is STUN. If the value is between 16 and 19 (inclusive), then the packet is ZRTP. If the value is between 20 and 63 (inclusive), then the packet is DTLS. If the value is between 64 and 79 (inclusive), then the packet is TURN Channel. If the value is in between 128 and 191 (inclusive), then the packet is RTP (or RTCP, if both RTCP and RTP are being multiplexed over the same destination port). If the value does not match any known range, then the packet MUST be dropped and an alert MAY be logged. This process is summarized in Figure 3.END NEW TEXTThis document updates existing IANA registries and adds a new range for TURN channels in the demultiplexing algorithm.These modifications do not introduce any specific security considerations beyond those detailed in .This specification contains the registration information for reserved STUN Methods codepoints, as explained in and in accordance with the procedures defined in Section 18.1 of .0x100-0xFFFReserved (For
DTLS-SRTP multiplexing collision avoidance, see RFC 7983. Cannot be
made available for assignment without IETF Review.)RFC 5764, RFC 7983This specification also reassigns the ranges in the STUN Methods Registry as follows:0x000-0x07FIETF Review0x080-0x0FFDesignated ExpertThis specification contains the registration information for reserved TLS ContentType codepoints, as explained in and in accordance with the procedures defined in Section 12 of .0-19Unassigned (Requires coordination; see RFC
7983)N/ARFC 5764, RFC 798364-255Unassigned (Requires coordination; see RFC
7983)N/ARFC
5764, RFC 7983This specification contains the registration information for
reserved codepoints in the "Traversal Using Relays around NAT (TURN)
Channel Numbers" registry, as explained in and in accordance with the procedures defined in Section 18 of .0x5000-0xFFFFReserved (For DTLS-SRTP multiplexing collision avoidance, see RFC 7983.)RFC 7983Negotiating Media Multiplexing Using the Session Description Protocol (SDP)The implicit STUN Method codepoint allocations problem was first
reported by Martin Thomson in the RTCWEB mailing list and discussed
further with Magnus Westerlund.Thanks to Simon Perreault, Colton Shields, Cullen Jennings, Colin
Perkins, Magnus Westerlund, Paul Jones, Jonathan Lennox, Varun Singh,
Justin Uberti, Joseph Salowey, Martin Thomson, Ben Campbell, Stephen
Farrell, Alan Johnston, Mehmet Ersue, Matt Miller, Spencer Dawkins, Joel
Halpern, and Paul Kyzivat for the comments, suggestions, and
questions that helped improve this document.