JOSE Working Group
Internet Engineering Task Force (IETF)                          M. Jones
Internet-Draft
Request for Comments: 7515                                     Microsoft
Intended status:
Category: Standards Track                                     J. Bradley
Expires: July 20, 2015
ISSN: 2070-1721                                            Ping Identity
                                                             N. Sakimura
                                                                     NRI
                                                        January 16,
                                                                May 2015

                        JSON Web Signature (JWS)
                 draft-ietf-jose-json-web-signature-41

Abstract

   JSON Web Signature (JWS) represents content secured with digital
   signatures or Message Authentication Codes (MACs) using JavaScript
   Object Notation (JSON) based JSON-based
   data structures.  Cryptographic algorithms and identifiers for use
   with this specification are described in the separate JSON Web
   Algorithms (JWA) specification and an IANA registry defined by that
   specification.  Related encryption capabilities are described in the
   separate JSON Web Encryption (JWE) specification.

Status of this This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of six months RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 20, 2015.
   http://www.rfc-editor.org/info/rfc7515.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  5 ....................................................4
      1.1. Notational Conventions  . . . . . . . . . . . . . . . . .  5 .....................................4
   2. Terminology  . . . . . . . . . . . . . . . . . . . . . . . . .  6 .....................................................5
   3. JSON Web Signature (JWS) Overview  . . . . . . . . . . . . . .  7 ...............................7
      3.1. JWS Compact Serialization Overview  . . . . . . . . . . .  8 .........................7
      3.2. JWS JSON Serialization Overview . . . . . . . . . . . . .  8 ............................8
      3.3. Example JWS . . . . . . . . . . . . . . . . . . . . . . .  9 ................................................8
   4. JOSE Header  . . . . . . . . . . . . . . . . . . . . . . . . . 10 .....................................................9
      4.1. Registered Header Parameter Names . . . . . . . . . . . . 11 .........................10
           4.1.1. "alg" (Algorithm) Header Parameter . . . . . . . . . . 11 .................10
           4.1.2. "jku" (JWK Set URL) Header Parameter . . . . . . . . . 11 ...............10
           4.1.3. "jwk" (JSON Web Key) Header Parameter  . . . . . . . . 11 ..............11
           4.1.4. "kid" (Key ID) Header Parameter  . . . . . . . . . . . 12 ....................11
           4.1.5. "x5u" (X.509 URL) Header Parameter . . . . . . . . . . 12 .................11
           4.1.6. "x5c" (X.509 Certificate Chain) Header Parameter . . . 12 ...11
           4.1.7. "x5t" (X.509 Certificate SHA-1 Thumbprint)
                  Header Parameter  . . . . . . . . . . . . . . . . . . . . . . 13 ...................................12
           4.1.8. "x5t#S256" (X.509 Certificate SHA-256
                  Thumbprint) Header Parameter . . . . . . . . . . . . . . . . . . . 13 .......................12
           4.1.9. "typ" (Type) Header Parameter  . . . . . . . . . . . . 13 ......................12
           4.1.10. "cty" (Content Type) Header Parameter  . . . . . . . . 14 .............13
           4.1.11. "crit" (Critical) Header Parameter . . . . . . . . . . 14 ................14
      4.2. Public Header Parameter Names . . . . . . . . . . . . . . 15 .............................14
      4.3. Private Header Parameter Names  . . . . . . . . . . . . . 15 ............................14
   5. Producing and Consuming JWSs . . . . . . . . . . . . . . . . . 15 ...................................15
      5.1. Message Signature or MAC Computation  . . . . . . . . . . 15 ......................15
      5.2. Message Signature or MAC Validation . . . . . . . . . . . 16 .......................16
      5.3. String Comparison Rules . . . . . . . . . . . . . . . . . 18 ...................................17
   6. Key Identification . . . . . . . . . . . . . . . . . . . . . . 19 .............................................18
   7. Serializations . . . . . . . . . . . . . . . . . . . . . . . . 19 .................................................19
      7.1. JWS Compact Serialization . . . . . . . . . . . . . . . . 20 .................................19
      7.2. JWS JSON Serialization  . . . . . . . . . . . . . . . . . 20 ....................................19
           7.2.1. General JWS JSON Serialization Syntax  . . . . . . . . 20 ..............20
           7.2.2. Flattened JWS JSON Serialization Syntax  . . . . . . . 22 ............21
   8. TLS Requirements . . . . . . . . . . . . . . . . . . . . . . . 23 ...............................................22
   9. IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 23 ............................................22
      9.1. JSON Web Signature and Encryption Header
           Parameters Registry  . . . . . . . . . . . . . . . . . . . . . . . . 24 .......................................23
           9.1.1. Registration Template  . . . . . . . . . . . . . . . . 25 ..............................23
           9.1.2. Initial Registry Contents  . . . . . . . . . . . . . . 25 ..........................24
      9.2. Media Type Registration . . . . . . . . . . . . . . . . . 27 ...................................26
           9.2.1. Registry Contents  . . . . . . . . . . . . . . . . . . 27 ..................................26
   10. Security Considerations  . . . . . . . . . . . . . . . . . . . 28 .......................................27
      10.1. Key Entropy and Random Values . . . . . . . . . . . . . . 28 ............................27
      10.2. Key Protection  . . . . . . . . . . . . . . . . . . . . . 29 ...........................................28
      10.3. Key Origin Authentication . . . . . . . . . . . . . . . . 29 ................................28
      10.4. Cryptographic Agility . . . . . . . . . . . . . . . . . . 29 ....................................28
      10.5. Differences between Digital Signatures and MACs . . . . . 29 ..........28
      10.6. Algorithm Validation  . . . . . . . . . . . . . . . . . . 30 .....................................29
      10.7. Algorithm Protection  . . . . . . . . . . . . . . . . . . 30 .....................................29
      10.8. Chosen Plaintext Attacks  . . . . . . . . . . . . . . . . 31 .................................30
      10.9. Timing Attacks  . . . . . . . . . . . . . . . . . . . . . 31 ...........................................30
      10.10. Replay Protection . . . . . . . . . . . . . . . . . . . . 31 .......................................30
      10.11. SHA-1 Certificate Thumbprints . . . . . . . . . . . . . . 31 ...........................30
      10.12. JSON Security Considerations  . . . . . . . . . . . . . . 32 ............................31
      10.13. Unicode Comparison Security Considerations  . . . . . . . 32 ..............31
   11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 33 ....................................................32
      11.1. Normative References  . . . . . . . . . . . . . . . . . . 33 .....................................32
      11.2. Informative References  . . . . . . . . . . . . . . . . . 34 ...................................34
   Appendix A.  JWS Examples  . . . . . . . . . . . . . . . . . . . . 36 .........................................36
     A.1.  Example JWS using Using HMAC SHA-256  . . . . . . . . . . . . . 36 ............................36
       A.1.1.  Encoding . . . . . . . . . . . . . . . . . . . . . . . 36 ..............................................36
       A.1.2.  Validating . . . . . . . . . . . . . . . . . . . . . . 38 ............................................38
     A.2.  Example JWS using RSASSA-PKCS-v1_5 Using RSASSA-PKCS1-v1_5 SHA-256  . . . . . . . 39 ...............38
       A.2.1.  Encoding . . . . . . . . . . . . . . . . . . . . . . . 39 ..............................................38
       A.2.2.  Validating . . . . . . . . . . . . . . . . . . . . . . 41 ............................................42
     A.3.  Example JWS using Using ECDSA P-256 SHA-256 . . . . . . . . . . 42 .....................42
       A.3.1.  Encoding . . . . . . . . . . . . . . . . . . . . . . . 42 ..............................................42
       A.3.2.  Validating . . . . . . . . . . . . . . . . . . . . . . 44 ............................................44
     A.4.  Example JWS using Using ECDSA P-521 SHA-512 . . . . . . . . . . 44 .....................45
       A.4.1.  Encoding . . . . . . . . . . . . . . . . . . . . . . . 44 ..............................................45
       A.4.2.  Validating . . . . . . . . . . . . . . . . . . . . . . 46 ............................................47
     A.5.  Example Unsecured JWS . . . . . . . . . . . . . . . . . . 46 .....................................47
     A.6.  Example JWS using Using General JWS JSON Serialization  . . . . 47 ..........48
       A.6.1.  JWS Per-Signature Protected Headers  . . . . . . . . . 48 ...................48
       A.6.2.  JWS Per-Signature Unprotected Headers  . . . . . . . . 48 .................49
       A.6.3.  Complete JOSE Header Values  . . . . . . . . . . . . . 48 ...........................49
       A.6.4.  Complete JWS JSON Serialization Representation . . . . 49 ........50
     A.7.  Example JWS using Using Flattened JWS JSON Serialization  . . . 49 ........51
   Appendix B.  "x5c" (X.509 Certificate Chain) Example . . . . . . . 50 ..............52
   Appendix C.  Notes on implementing Implementing base64url encoding Encoding without
                padding . . . . . . . . . . . . . . . . . . . . . . . 52
                Padding ..............................................54
   Appendix D.  Notes on Key Selection  . . . . . . . . . . . . . . . 53 ...............................55
   Appendix E.  Negative Test Case for "crit" Header Parameter  . . . 54 .......57
   Appendix F.  Detached Content  . . . . . . . . . . . . . . . . . . 55
   Appendix G. .....................................57
   Acknowledgements  . . . . . . . . . . . . . . . . . . 55
   Appendix H.  Document History  . . . . . . . . . . . . . . . . . . 56 ..................................................58
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 67 ................................................58

1.  Introduction

   JSON Web Signature (JWS) represents content secured with digital
   signatures or Message Authentication Codes (MACs) using JavaScript
   Object Notation (JSON) JSON-based
   [RFC7159] based data structures.  The JWS cryptographic mechanisms provide
   integrity protection for an arbitrary sequence of octets.  See
   Section 10.5 for a discussion on the differences between Digital Signatures digital
   signatures and MACs.

   Two closely related serializations for JWSs are defined.  The JWS
   Compact Serialization is a compact, URL-safe representation intended
   for space constrained space-constrained environments such as HTTP Authorization headers
   and URI query parameters.  The JWS JSON Serialization represents JWSs
   as JSON objects and enables multiple signatures and/or MACs to be
   applied to the same content.  Both share the same cryptographic
   underpinnings.

   Cryptographic algorithms and identifiers for use with this
   specification are described in the separate JSON Web Algorithms (JWA)
   [JWA] specification and an IANA registry defined by that
   specification.  Related encryption capabilities are described in the
   separate JSON Web Encryption (JWE) [JWE] specification.

   Names defined by this specification are short because a core goal is
   for the resulting representations to be compact.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in Key
   "Key words for use in RFCs to Indicate Requirement Levels Levels" [RFC2119].  If
   these words are used without being spelled in uppercase then they are
   to
   The interpretation should only be interpreted with their normal natural language meanings. applied when the terms appear in
   all capital letters.

   BASE64URL(OCTETS) denotes the base64url encoding of OCTETS, per
   Section 2.

   UTF8(STRING) denotes the octets of the UTF-8 [RFC3629] representation
   of STRING, where STRING is a sequence of zero or more Unicode
   [UNICODE] characters.

   ASCII(STRING) denotes the octets of the ASCII [RFC20] representation
   of STRING, where STRING is a sequence of zero or more ASCII
   characters.

   The concatenation of two values A and B is denoted as A || B.

2.  Terminology

   These terms are defined by this specification:

   JSON Web Signature (JWS)
      A data structure representing a digitally signed or MACed message.

   JOSE Header
      JSON object containing the parameters describing the cryptographic
      operations and parameters employed.  The JOSE (JSON Object Signing
      and Encryption) Header is comprised of a set of Header Parameters.

   JWS Payload
      The sequence of octets to be secured -- a.k.a., a.k.a. the message.  The
      payload can contain an arbitrary sequence of octets.

   JWS Signature
      Digital signature or MAC over the JWS Protected Header and the JWS
      Payload.

   Header Parameter
      A name/value pair that is member of the JOSE Header.

   JWS Protected Header
      JSON object that contains the Header Parameters that are integrity
      protected by the JWS Signature digital signature or MAC operation.
      For the JWS Compact Serialization, this comprises the entire JOSE
      Header.  For the JWS JSON Serialization, this is one component of
      the JOSE Header.

   JWS Unprotected Header
      JSON object that contains the Header Parameters that are not
      integrity protected.  This can only be present when using the JWS
      JSON Serialization.

   Base64url Encoding
      Base64 encoding using the URL- and filename-safe character set
      defined in Section 5 of RFC 4648 [RFC4648], with all trailing '='
      characters omitted (as permitted by Section 3.2) and without the
      inclusion of any line breaks, white space, whitespace, or other additional
      characters.  Note that the base64url encoding of the empty octet
      sequence is the empty string.  (See Appendix C for notes on
      implementing base64url encoding without padding.)

   JWS Signing Input
      The input to the digital signature or MAC computation.  Its value
      is ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.' ||
      BASE64URL(JWS Payload)).

   JWS Compact Serialization
      A representation of the JWS as a compact, URL-safe string.

   JWS JSON Serialization
      A representation of the JWS as a JSON object.  Unlike the JWS
      Compact Serialization, the JWS JSON Serialization enables multiple
      digital signatures and/or MACs to be applied to the same content.
      This representation is neither optimized for compactness nor URL-
      safe.

   Unsecured JWS
      A JWS that provides no integrity protection.  Unsecured JWSs use
      the "alg" value "none".

   Collision-Resistant Name
      A name in a namespace that enables names to be allocated in a
      manner such that they are highly unlikely to collide with other
      names.  Examples of collision-resistant namespaces include: Domain
      Names, Object Identifiers (OIDs) as defined in the ITU-T X.660 and
      X.670 Recommendation series, and Universally Unique IDentifiers
      (UUIDs) [RFC4122].  When using an administratively delegated
      namespace, the definer of a name needs to take reasonable
      precautions to ensure they are in control of the portion of the
      namespace they use to define the name.

   StringOrURI
      A JSON string value, with the additional requirement that while
      arbitrary string values MAY be used, any value containing a ":"
      character MUST be a URI [RFC3986].  StringOrURI values are
      compared as case-sensitive strings with no transformations or
      canonicalizations applied.

   These

   The terms defined by the JSON Web Encryption (JWE) [JWE]
   specification are incorporated into this specification: "JSON Web Encryption (JWE)", "JWE Compact Serialization",
   and "JWE JSON
   Serialization".

   These terms Serialization" are defined by the Internet Security Glossary, Version 2
   [RFC4949] are incorporated into this specification: JWE specification
   [JWE].

   The terms "Digital Signature" and "Message Authentication Code (MAC)".

3.  JSON Web Signature (JWS) Overview

   JWS (MAC)"
   are defined by the "Internet Security Glossary, Version 2" [RFC4949].

3.  JSON Web Signature (JWS) Overview

   JWS represents digitally signed or MACed content using JSON data
   structures and base64url encoding.  These JSON data structures MAY
   contain white space whitespace and/or line breaks before or after any JSON values
   or structural characters, in accordance with Section 2 of RFC 7159
   [RFC7159].  A JWS represents these logical values (each of which is
   defined in Section 2):

   o  JOSE Header
   o  JWS Payload
   o  JWS Signature

   For a JWS, the JOSE Header members are the union of the members of
   these values (each of which is defined in Section 2):

   o  JWS Protected Header
   o  JWS Unprotected Header

   This document defines two serializations for JWSs: a compact, URL-
   safe serialization called the JWS Compact Serialization and a JSON
   serialization called the JWS JSON Serialization.  In both
   serializations, the JWS Protected Header, JWS Payload, and JWS
   Signature are base64url encoded, since JSON lacks a way to directly
   represent arbitrary octet sequences.

3.1.  JWS Compact Serialization Overview

   In the JWS Compact Serialization, no JWS Unprotected Header is used.
   In this case, the JOSE Header and the JWS Protected Header are the
   same.

   In the JWS Compact Serialization, a JWS is represented as the
   concatenation:

      BASE64URL(UTF8(JWS Protected Header)) || '.' ||
      BASE64URL(JWS Payload) || '.' ||
      BASE64URL(JWS Signature)

   See Section 7.1 for more information about the JWS Compact
   Serialization.

3.2.  JWS JSON Serialization Overview

   In the JWS JSON Serialization, one or both of the JWS Protected
   Header and JWS Unprotected Header MUST be present.  In this case, the
   members of the JOSE Header are the union of the members of the JWS
   Protected Header and the JWS Unprotected Header values that are
   present.

   In the JWS JSON Serialization, a JWS is represented as a JSON object
   containing some or all of these four members:

   o  "protected", with the value BASE64URL(UTF8(JWS Protected Header))
   o  "header", with the value JWS Unprotected Header
   o  "payload", with the value BASE64URL(JWS Payload)
   o  "signature", with the value BASE64URL(JWS Signature)

   The three base64url encoded base64url-encoded result strings and the JWS Unprotected
   Header value are represented as members within a JSON object.  The
   inclusion of some of these values is OPTIONAL.  The JWS JSON
   Serialization can also represent multiple signature and/or MAC
   values, rather than just one.  See Section 7.2 for more information
   about the JWS JSON Serialization.

3.3.  Example JWS

   This section provides an example of a JWS.  Its computation is
   described in more detail in Appendix A.1, including specifying the
   exact octet sequences representing the JSON values used and the key
   value used.

   The following example JWS Protected Header declares that the encoded
   object is a JSON Web Token (JWT) [JWT] and the JWS Protected Header and the
   JWS Payload are secured using the HMAC SHA-256 [RFC2104, SHS] [RFC2104] [SHS]
   algorithm:

     {"typ":"JWT",
      "alg":"HS256"}

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9

   The UTF-8 representation of the following JSON object is used as the
   JWS Payload.  (Note that the payload can be any content, content and need not
   be a representation of a JSON object.)
     {"iss":"joe",
      "exp":1300819380,
      "http://example.com/is_root":true}

   Encoding this JWS Payload as BASE64URL(JWS Payload) gives this value
   (with line breaks for display purposes only):

     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   Computing the HMAC of the JWS Signing Input ASCII(BASE64URL(UTF8(JWS
   Protected Header)) || '.' || BASE64URL(JWS Payload)) with the HMAC
   SHA-256 algorithm using the key specified in Appendix A.1 and
   base64url encoding
   base64url-encoding the result yields this BASE64URL(JWS Signature)
   value:

     dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
     .
     dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

   See Appendix A for additional examples, including examples using the
   JWS JSON Serialization in Sections A.6 and A.7.

4.  JOSE Header

   For a JWS, the members of the JSON object(s) representing the JOSE
   Header describe the digital signature or MAC applied to the JWS
   Protected Header and the JWS Payload and optionally additional
   properties of the JWS.  The Header Parameter names within the JOSE
   Header MUST be unique; JWS parsers MUST either reject JWSs with
   duplicate Header Parameter names or use a JSON parser that returns
   only the lexically last duplicate member name, as specified in
   Section 15.12 (The ("The JSON Object) Object") of ECMAScript 5.1 [ECMAScript].

   Implementations are required to understand the specific Header
   Parameters defined by this specification that are designated as "MUST
   be understood" and process them in the manner defined in this
   specification.  All other Header Parameters defined by this
   specification that are not so designated MUST be ignored when not
   understood.  Unless listed as a critical Header Parameter, per
   Section 4.1.11, all Header Parameters not defined by this
   specification MUST be ignored when not understood.

   There are three classes of Header Parameter names: Registered Header
   Parameter names, Public Header Parameter names, and Private Header
   Parameter names.

4.1.  Registered Header Parameter Names

   The following Header Parameter names for use in JWSs are registered
   in the IANA JSON "JSON Web Signature and Encryption Header Parameters Parameters"
   registry defined in established by Section 9.1, with meanings as defined in the
   subsections below.

   As indicated by the common registry, JWSs and JWEs share a common
   Header Parameter space; when a parameter is used by both
   specifications, its usage must be compatible between the
   specifications.

4.1.1.  "alg" (Algorithm) Header Parameter

   The "alg" (algorithm) Header Parameter identifies the cryptographic
   algorithm used to secure the JWS.  The JWS Signature value is not
   valid if the "alg" value does not represent a supported algorithm, algorithm or
   if there is not a key for use with that algorithm associated with the
   party that digitally signed or MACed the content.  "alg" values
   should either be registered in the IANA JSON "JSON Web Signature and
   Encryption
   Algorithms Algorithms" registry defined in established by [JWA] or be a value
   that contains a Collision-Resistant Name.  The "alg" value is a case-sensitive case-
   sensitive ASCII string containing a StringOrURI value.  This Header
   Parameter MUST be present and MUST be understood and processed by
   implementations.

   A list of defined "alg" values for this use can be found in the IANA
   JSON
   "JSON Web Signature and Encryption Algorithms Algorithms" registry defined in established
   by [JWA]; the initial contents of this registry are the values
   defined in Section 3.1 of the JSON Web Algorithms (JWA) [JWA] specification. [JWA].

4.1.2.  "jku" (JWK Set URL) Header Parameter

   The "jku" (JWK Set URL) Header Parameter is a URI [RFC3986] that
   refers to a resource for a set of JSON-encoded public keys, one of
   which corresponds to the key used to digitally sign the JWS.  The
   keys MUST be encoded as a JSON Web Key JWK Set (JWK Set) [JWK].  The protocol used to
   acquire the resource MUST provide integrity protection; an HTTP GET
   request to retrieve the JWK Set MUST use TLS
   [RFC2818, RFC5246]; Transport Layer Security
   (TLS) [RFC2818] [RFC5246]; and the identity of the server MUST be
   validated, as per Section 6 of RFC 6125 [RFC6125].  Also, see
   Section 8 on TLS requirements.  Use of this Header Parameter is
   OPTIONAL.

4.1.3.  "jwk" (JSON Web Key) Header Parameter

   The "jwk" (JSON Web Key) Header Parameter is the public key that
   corresponds to the key used to digitally sign the JWS.  This key is
   represented as a JSON Web Key [JWK].  Use of this Header Parameter is
   OPTIONAL.

4.1.4.  "kid" (Key ID) Header Parameter

   The "kid" (key ID) Header Parameter is a hint indicating which key
   was used to secure the JWS.  This parameter allows originators to
   explicitly signal a change of key to recipients.  The structure of
   the "kid" value is unspecified.  Its value MUST be a case-sensitive
   string.  Use of this Header Parameter is OPTIONAL.

   When used with a JWK, the "kid" value is used to match a JWK "kid"
   parameter value.

4.1.5.  "x5u" (X.509 URL) Header Parameter

   The "x5u" (X.509 URL) Header Parameter is a URI [RFC3986] that refers
   to a resource for the X.509 public key certificate or certificate
   chain [RFC5280] corresponding to the key used to digitally sign the
   JWS.  The identified resource MUST provide a representation of the
   certificate or certificate chain that conforms to RFC 5280 [RFC5280]
   in PEM encoded PEM-encoded form, with each certificate delimited as specified in
   Section 6.1 of RFC 4945 [RFC4945].  The certificate containing the
   public key corresponding to the key used to digitally sign the JWS
   MUST be the first certificate.  This MAY be followed by additional
   certificates, with each subsequent certificate being the one used to
   certify the previous one.  The protocol used to acquire the resource
   MUST provide integrity protection; an HTTP GET request to retrieve
   the certificate MUST use TLS [RFC2818, RFC5246]; [RFC2818] [RFC5246]; and the identity of
   the server MUST be validated, as per Section 6 of RFC 6125 [RFC6125].
   Also, see Section 8 on TLS requirements.  Use of this Header
   Parameter is OPTIONAL.

4.1.6.  "x5c" (X.509 Certificate Chain) Header Parameter

   The "x5c" (X.509 Certificate Chain) certificate chain) Header Parameter contains the
   X.509 public key certificate or certificate chain [RFC5280]
   corresponding to the key used to digitally sign the JWS.  The
   certificate or certificate chain is represented as a JSON array of
   certificate value strings.  Each string in the array is a base64
   encoded ([RFC4648] Section
   base64-encoded (Section 4 of [RFC4648] -- not base64url encoded) base64url-encoded) DER
   [ITU.X690.1994]
   [ITU.X690.2008] PKIX certificate value.  The certificate containing
   the public key corresponding to the key used to digitally sign the
   JWS MUST be the first certificate.  This MAY be followed by
   additional certificates, with each subsequent certificate being the
   one used to certify the previous one.  The recipient MUST validate
   the certificate chain according to RFC 5280 [RFC5280] and consider
   the certificate or certificate chain to be invalid if any validation
   failure occurs.  Use of this Header Parameter is OPTIONAL.

   See Appendix B for an example "x5c" value.

4.1.7.  "x5t" (X.509 Certificate SHA-1 Thumbprint) Header Parameter

   The "x5t" (X.509 Certificate certificate SHA-1 Thumbprint) thumbprint) Header Parameter is a
   base64url encoded
   base64url-encoded SHA-1 thumbprint (a.k.a. digest) of the DER
   encoding of the X.509 certificate [RFC5280] corresponding to the key
   used to digitally sign the JWS.  Note that certificate thumbprints
   are also sometimes known as certificate fingerprints.  Use of this
   Header Parameter is OPTIONAL.

4.1.8.  "x5t#S256" (X.509 Certificate SHA-256 Thumbprint) Header
        Parameter

   The "x5t#S256" (X.509 Certificate certificate SHA-256 Thumbprint) thumbprint) Header
   Parameter is a base64url encoded base64url-encoded SHA-256 thumbprint (a.k.a. digest)
   of the DER encoding of the X.509 certificate [RFC5280] corresponding
   to the key used to digitally sign the JWS.  Note that certificate
   thumbprints are also sometimes known as certificate fingerprints.
   Use of this Header Parameter is OPTIONAL.

4.1.9.  "typ" (Type) Header Parameter

   The "typ" (type) Header Parameter is used by JWS applications to
   declare the MIME Media Type media type [IANA.MediaTypes] of this complete JWS.  This
   is intended for use by the application when more than one kind of
   object could be present in an application data structure that can
   contain a JWS; the application can use this value to disambiguate
   among the different kinds of objects that might be present.  It will
   typically not be used by applications when the kind of object is
   already known.  This parameter is ignored by JWS implementations; any
   processing of this parameter is performed by the JWS application.
   Use of this Header Parameter is OPTIONAL.

   Per RFC 2045 [RFC2045], all media type values, subtype values, and
   parameter names are case-insensitive. case insensitive.  However, parameter values are
   case-sensitive
   case sensitive unless otherwise specified for the specific parameter.

   To keep messages compact in common situations, it is RECOMMENDED that
   producers omit an "application/" prefix of a media type value in a
   "typ" Header Parameter when no other '/' appears in the media type
   value.  A recipient using the media type value MUST treat it as if
   "application/" were prepended to any "typ" value not containing a
   '/'.  For instance, a "typ" value of "example" SHOULD be used to
   represent the "application/example" media type; whereas, type, whereas the media
   type "application/example;part="1/2"" cannot be shortened to
   "example;part="1/2"".

   The "typ" value "JOSE" can be used by applications to indicate that
   this object is a JWS or JWE using the JWS Compact Serialization or
   the JWE Compact Serialization.  The "typ" value "JOSE+JSON" can be
   used by applications to indicate that this object is a JWS or JWE
   using the JWS JSON Serialization or the JWE JSON Serialization.
   Other type values can also be used by applications.

4.1.10.  "cty" (Content Type) Header Parameter

   The "cty" (content type) Header Parameter is used by JWS applications
   to declare the MIME Media Type media type [IANA.MediaTypes] of the secured content
   (the payload).  This is intended for use by the application when more
   than one kind of object could be present in the JWS
   payload; Payload; the
   application can use this value to disambiguate among the different
   kinds of objects that might be present.  It will typically not be
   used by applications when the kind of object is already known.  This
   parameter is ignored by JWS implementations; any processing of this
   parameter is performed by the JWS application.  Use of this Header
   Parameter is OPTIONAL.

   Per RFC 2045 [RFC2045], all media type values, subtype values, and
   parameter names are case-insensitive. case insensitive.  However, parameter values are
   case-sensitive
   case sensitive unless otherwise specified for the specific parameter.

   To keep messages compact in common situations, it is RECOMMENDED that
   producers omit an "application/" prefix of a media type value in a
   "cty" Header Parameter when no other '/' appears in the media type
   value.  A recipient using the media type value MUST treat it as if
   "application/" were prepended to any "cty" value not containing a
   '/'.  For instance, a "cty" value of "example" SHOULD be used to
   represent the "application/example" media type; whereas, type, whereas the media
   type "application/example;part="1/2"" cannot be shortened to
   "example;part="1/2"".

4.1.11.  "crit" (Critical) Header Parameter

   The "crit" (critical) Header Parameter indicates that extensions to
   the initial RFC versions of [[
   this specification ]] and and/or [JWA] are being used that MUST be
   understood and processed.  Its value is an array listing the Header
   Parameter names present in the JOSE Header that use those extensions.
   If any of the listed extension Header Parameters are not understood
   and supported by the recipient, then the JWS is invalid.  Producers
   MUST NOT include Header Parameter names defined by the initial RFC versions of [[ this specification ]]
   or [JWA] for use with JWS, duplicate names, or names that do not
   occur as Header Parameter names within the JOSE Header in the "crit"
   list.  Producers MUST NOT use the empty list "[]" as the "crit"
   value.  Recipients MAY consider the JWS to be invalid if the critical
   list contains any Header Parameter names defined by the initial RFC
   versions of [[ this
   specification ]] or [JWA] for use with JWS, JWS or if any other constraints
   on its use are violated.  When used, this Header Parameter MUST be
   integrity protected; therefore, it MUST occur only within the JWS
   Protected Header.  Use of this Header Parameter is OPTIONAL.  This
   Header Parameter MUST be understood and processed by implementations.

   An example use, along with a hypothetical "exp" (expiration-time) (expiration time)
   field is:

     {"alg":"ES256",
      "crit":["exp"],
      "exp":1363284000
     }

4.2.  Public Header Parameter Names

   Additional Header Parameter names can be defined by those using JWSs.
   However, in order to prevent collisions, any new Header Parameter
   name should either be registered in the IANA JSON "JSON Web Signature and
   Encryption Header Parameters Parameters" registry defined in established by Section 9.1 or
   be a Public Name: a Name (a value that contains a Collision-Resistant Name. Name).
   In each case, the definer of the name or value needs to take
   reasonable precautions to make sure they are in control of the part
   of the namespace they use to define the Header Parameter name.

   New Header Parameters should be introduced sparingly, as they can
   result in non-interoperable JWSs.

4.3.  Private Header Parameter Names

   A producer and consumer of a JWS may agree to use Header Parameter
   names that are Private Names: names Names (names that are not Registered Header
   Parameter names Section 4.1 (Section 4.1)) or Public Header Parameter names
   Section 4.2.
   (Section 4.2).  Unlike Public Header Parameter names, Private Header
   Parameter names are subject to collision and should be used with
   caution.

5.  Producing and Consuming JWSs

5.1.  Message Signature or MAC Computation

   To create a JWS, the following steps are performed.  The order of the
   steps is not significant in cases where there are no dependencies
   between the inputs and outputs of the steps.

   1.  Create the content to be used as the JWS Payload.

   2.  Compute the encoded payload value BASE64URL(JWS Payload).

   3.  Create the JSON object(s) containing the desired set of Header
       Parameters, which together comprise the JOSE Header: the Header (the JWS
       Protected Header and/or the JWS Unprotected Header. Header).

   4.  Compute the encoded header value BASE64URL(UTF8(JWS Protected
       Header)).  If the JWS Protected Header is not present (which can
       only happen when using the JWS JSON Serialization and no
       "protected" member is present), let this value be the empty
       string.

   5.  Compute the JWS Signature in the manner defined for the
       particular algorithm being used over the JWS Signing Input
       ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.' ||
       BASE64URL(JWS Payload)).  The "alg" (algorithm) Header Parameter
       MUST be present in the JOSE Header, with the algorithm value
       accurately representing the algorithm used to construct the JWS
       Signature.

   6.  Compute the encoded signature value BASE64URL(JWS Signature).

   7.  If the JWS JSON Serialization is being used, repeat this process
       (steps 3-6) for each digital signature or MAC operation being
       performed.

   8.  Create the desired serialized output.  The JWS Compact
       Serialization of this result is BASE64URL(UTF8(JWS Protected
       Header)) || '.' || BASE64URL(JWS Payload) || '.' || BASE64URL(JWS
       Signature).  The JWS JSON Serialization is described in
       Section 7.2.

5.2.  Message Signature or MAC Validation

   When validating a JWS, the following steps are performed.  The order
   of the steps is not significant in cases where there are no
   dependencies between the inputs and outputs of the steps.  If any of
   the listed steps fails, then the signature or MAC cannot be
   validated.

   When there are multiple JWS Signature values, it is an application
   decision which of the JWS Signature values must successfully validate
   for the JWS to be accepted.  In some cases, all must successfully
   validate
   validate, or the JWS will be considered invalid.  In other cases,
   only a specific JWS Signature value needs to be successfully
   validated.  However, in all cases, at least one JWS Signature value
   MUST successfully validate validate, or the JWS MUST be considered invalid.

   1.  Parse the JWS representation to extract the serialized values for
       the components of the JWS.  When using the JWS Compact
       Serialization, these components are the base64url encoded base64url-encoded
       representations of the JWS Protected Header, the JWS Payload, and
       the JWS Signature, and when using the JWS JSON Serialization,
       these components also include the unencoded JWS Unprotected
       Header value.  When using the JWS Compact Serialization, the JWS
       Protected Header, the JWS Payload, and the JWS Signature are
       represented as base64url encoded base64url-encoded values in that order, with each
       value being separated from the next by a single period ('.')
       character, resulting in exactly two delimiting period characters
       being used.  The JWS JSON Serialization is described in
       Section 7.2.

   2.   Base64url decode  Base64url-decode the encoded representation of the JWS Protected
       Header, following the restriction that no line breaks, white
        space,
       whitespace, or other additional characters have been used.

   3.  Verify that the resulting octet sequence is a UTF-8 encoded UTF-8-encoded
       representation of a completely valid JSON object conforming to
       RFC 7159 [RFC7159]; let the JWS Protected Header be this JSON
       object.

   4.  If using the JWS Compact Serialization, let the JOSE Header be
       the JWS Protected Header.  Otherwise, when using the JWS JSON
       Serialization, let the JOSE Header be the union of the members of
       the corresponding JWS Protected Header and JWS Unprotected
       Header, all of which must be completely valid JSON objects.
       During this step, verify that the resulting JOSE Header does not
       contain duplicate Header Parameter names.  When using the JWS
       JSON Serialization, this restriction includes that the same
       Header Parameter name also MUST NOT occur in distinct JSON object
       values that together comprise the JOSE Header.

   5.  Verify that the implementation understands and can process all
       fields that it is required to support, whether required by this
       specification, by the algorithm being used, or by the "crit"
       Header Parameter value, and that the values of those parameters
       are also understood and supported.

   6.   Base64url decode  Base64url-decode the encoded representation of the JWS Payload,
       following the restriction that no line breaks, white space, whitespace, or
       other additional characters have been used.

   7.   Base64url decode  Base64url-decode the encoded representation of the JWS Signature,
       following the restriction that no line breaks, white
        space, whitespace, or
       other additional characters have been used.

   8.  Validate the JWS Signature against the JWS Signing Input
       ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.' ||
       BASE64URL(JWS Payload)) in the manner defined for the algorithm
       being used, which MUST be accurately represented by the value of
       the "alg" (algorithm) Header Parameter, which MUST be present.
       See Section 10.6 for security considerations on algorithm
       validation.  Record whether the validation succeeded or not.

   9.  If the JWS JSON Serialization is being used, repeat this process
       (steps 4-8) for each digital signature or MAC value contained in
       the representation.

   10. If none of the validations in step 9 succeeded, then the JWS MUST
       be considered invalid.  Otherwise, in the JWS JSON Serialization
       case, return a result to the application indicating which of the
       validations succeeded and failed.  In the JWS Compact
       Serialization case, the result can simply indicate whether or not
       the JWS was successfully validated.

   Finally, note that it is an application decision which algorithms may
   be used in a given context.  Even if a JWS can be successfully
   validated, unless the algorithm(s) used in the JWS are acceptable to
   the application, it SHOULD consider the JWS to be invalid.

5.3.  String Comparison Rules

   Processing a JWS inevitably requires comparing known strings to
   members and values in JSON objects.  For example, in checking what
   the algorithm is, the Unicode string "alg" will be checked against
   the member names in the JOSE Header to see if there is a matching
   Header Parameter name.  The same process is then used to determine if
   the value of the "alg" Header Parameter represents a supported
   algorithm.

   The JSON rules for doing member name comparison are described in
   Section 8.3 of RFC 7159 [RFC7159].  Since the only string comparison
   operations that are performed are equality and inequality, the same
   rules can be used for comparing both member names and member values
   against known strings.

   These comparison rules MUST be used for all JSON string comparisons
   except in cases where the definition of the member explicitly calls
   out that a different comparison rule is to be used for that member
   value.  Only the "typ" and "cty" member values defined in this
   specification do not use these comparison rules.

   Some applications may include case-insensitive information in a case-
   sensitive value, such as including a DNS name as part of a "kid" (key
   ID) value.  In those cases, the application may need to define a
   convention for the canonical case to use for representing the case-
   insensitive portions, such as lowercasing them, if more than one
   party might need to produce the same value so that they can be
   compared.  (However  (However, if all other parties consume whatever value the
   producing party emitted verbatim without attempting to compare it to
   an independently produced value, then the case used by the producer
   will not matter.)

   Also, see the JSON security considerations in Section 10.12 and the
   Unicode security considerations in Section 10.13.

6.  Key Identification

   It is necessary for the recipient of a JWS to be able to determine
   the key that was employed for the digital signature or MAC operation.
   The key employed can be identified using the Header Parameter methods
   described in Section 4.1 or can be identified using methods that are
   outside the scope of this specification.  Specifically, the Header
   Parameters "jku", "jwk", "kid", "x5u", "x5c", "x5t", and "x5t#S256"
   can be used to identify the key used.  These Header Parameters MUST
   be integrity protected if the information that they convey is to be
   utilized in a trust decision; however, if the only information used
   in the trust decision is a key, these parameters need not be
   integrity protected, since changing them in a way that causes a
   different key to be used will cause the validation to fail.

   The producer SHOULD include sufficient information in the Header
   Parameters to identify the key used, unless the application uses
   another means or convention to determine the key used.  Validation of
   the signature or MAC fails when the algorithm used requires a key
   (which is true of all algorithms except for "none") and the key used
   cannot be determined.

   The means of exchanging any shared symmetric keys used is outside the
   scope of this specification.

   Also, see Appendix D for notes on possible key selection algorithms.

7.  Serializations

   JWSs use one of two serializations: the JWS Compact Serialization or
   the JWS JSON Serialization.  Applications using this specification
   need to specify what serialization and serialization features are
   used for that application.  For instance, applications might specify
   that only the JWS JSON Serialization is used, that only JWS JSON
   Serialization support for a single signature or MAC value is used, or
   that support for multiple signatures and/or MAC values is used.  JWS
   implementations only need to implement the features needed for the
   applications they are designed to support.

7.1.  JWS Compact Serialization

   The JWS Compact Serialization represents digitally signed or MACed
   content as a compact, URL-safe string.  This string is:

      BASE64URL(UTF8(JWS Protected Header)) || '.' ||
      BASE64URL(JWS Payload) || '.' ||
      BASE64URL(JWS Signature)

   Only one signature/MAC is supported by the JWS Compact Serialization
   and it provides no syntax to represent a JWS Unprotected Header
   value.

7.2.  JWS JSON Serialization

   The JWS JSON Serialization represents digitally signed or MACed
   content as a JSON object.  This representation is neither optimized
   for compactness nor URL-safe.

   Two closely related syntaxes are defined for the JWS JSON
   Serialization: a fully general syntax, with which content can be
   secured with more than one digital signature and/or MAC operation,
   and a flattened syntax, which is optimized for the single digital
   signature or MAC case.

7.2.1.  General JWS JSON Serialization Syntax

   The following members are defined for use in top-level JSON objects
   used for the fully general JWS JSON Serialization syntax:

   payload
      The "payload" member MUST be present and contain the value
      BASE64URL(JWS Payload).

   signatures
      The "signatures" member value MUST be an array of JSON objects.
      Each object represents a signature or MAC over the JWS Payload and
      the JWS Protected Header.

   The following members are defined for use in the JSON objects that
   are elements of the "signatures" array:

   protected
      The "protected" member MUST be present and contain the value
      BASE64URL(UTF8(JWS Protected Header)) when the JWS Protected
      Header value is non-empty; otherwise, it MUST be absent.  These
      Header Parameter values are integrity protected.

   header
      The "header" member MUST be present and contain the value JWS
      Unprotected Header when the JWS Unprotected Header value is non-
      empty; otherwise, it MUST be absent.  This value is represented as
      an unencoded JSON object, rather than as a string.  These Header
      Parameter values are not integrity protected.

   signature
      The "signature" member MUST be present and contain the value
      BASE64URL(JWS Signature).

   At least one of the "protected" and "header" members MUST be present
   for each signature/MAC computation so that an "alg" Header Parameter
   value is conveyed.

   Additional members can be present in both the JSON objects defined
   above; if not understood by implementations encountering them, they
   MUST be ignored.

   The Header Parameter values used when creating or validating
   individual signature or MAC values are the union of the two sets of
   Header Parameter values that may be present: (1) the JWS Protected
   Header represented in the "protected" member of the signature/MAC's
   array element, and (2) the JWS Unprotected Header in the "header"
   member of the signature/MAC's array element.  The union of these sets
   of Header Parameters comprises the JOSE Header.  The Header Parameter
   names in the two locations MUST be disjoint.

   Each JWS Signature value is computed using the parameters of the
   corresponding JOSE Header value in the same manner as for the JWS
   Compact Serialization.  This has the desirable property that each JWS
   Signature value represented in the "signatures" array is identical to
   the value that would have been computed for the same parameter in the
   JWS Compact Serialization, provided that the JWS Protected Header
   value for that signature/MAC computation (which represents the
   integrity protected
   integrity-protected Header Parameter values) matches that used in the
   JWS Compact Serialization.

   In summary, the syntax of a JWS using the general JWS JSON
   Serialization is as follows:

     {
      "payload":"<payload contents>",
      "signatures":[
       {"protected":"<integrity-protected header 1 contents>",
        "header":<non-integrity-protected header 1 contents>,
        "signature":"<signature 1 contents>"},
       ...
       {"protected":"<integrity-protected header N contents>",
        "header":<non-integrity-protected header N contents>,
        "signature":"<signature N contents>"}]
     }

   See Appendix A.6 for an example JWS using the general JWS JSON
   Serialization syntax.

7.2.2.  Flattened JWS JSON Serialization Syntax

   The flattened JWS JSON Serialization syntax is based upon the general
   syntax,
   syntax but flattens it, optimizing it for the single digital
   signature/MAC case.  It flattens it by removing the "signatures"
   member and instead placing those members defined for use in the
   "signatures" array (the "protected", "header", and "signature"
   members) in the top-level JSON object (at the same level as the
   "payload" member).

   The "signatures" member MUST NOT be present when using this syntax.
   Other than this syntax difference, JWS JSON Serialization objects
   using the flattened syntax are processed identically to those using
   the general syntax.

   In summary, the syntax of a JWS using the flattened JWS JSON
   Serialization is as follows:

     {
      "payload":"<payload contents>",
      "protected":"<integrity-protected header contents>",
      "header":<non-integrity-protected header contents>,
      "signature":"<signature contents>"
     }

   See Appendix A.7 for an example JWS using the flattened JWS JSON
   Serialization syntax.

8.  TLS Requirements

   Implementations supporting the "jku" and/or "x5u" Header Parameters
   MUST support TLS.  Which TLS version(s) ought to be implemented will
   vary over time, time and depend on the widespread deployment and known
   security vulnerabilities at the time of implementation.  At the time
   of this writing, TLS version 1.2 [RFC5246] is the most recent
   version.

   To protect against information disclosure and tampering,
   confidentiality protection MUST be applied using TLS with a
   ciphersuite that provides confidentiality and integrity protection.
   See current publications by the IETF TLS working group, including RFC
   6176 [RFC6176], for guidance on the ciphersuites currently considered
   to be appropriate for use.  Also, see Recommendations "Recommendations for Secure Use
   of TLS Transport Layer Security (TLS) and DTLS [I-D.ietf-uta-tls-bcp] Datagram Transport Layer
   Security (DTLS)" [RFC7525] for recommendations on improving the
   security of software and services using TLS.

   Whenever TLS is used, the identity of the service provider encoded in
   the TLS server certificate MUST be verified using the procedures
   described in Section 6 of RFC 6125 [RFC6125].

9.  IANA Considerations

   The following registration procedure is used for all the registries
   established by this specification.

   Values are registered on a Specification Required [RFC5226] basis
   after a three-week review period on the jose-reg-review@ietf.org
   mailing list, on the advice of one or more Designated Experts.
   However, to allow for the allocation of values prior to publication,
   the Designated Expert(s) Experts may approve registration once they are
   satisfied that such a specification will be published.

   Registration requests must be sent to the jose-reg-review@ietf.org mailing list for review and comment, with should use
   an appropriate subject (e.g., "Request to register header parameter:
   example").

   Within the review period, the Designated Expert(s) Experts will either approve
   or deny the registration request, communicating this decision to the
   review list and IANA.  Denials should include an explanation and, if
   applicable, suggestions as to how to make the request successful.
   Registration requests that are undetermined for a period longer than
   21 days can be brought to the IESG's attention (using the
   iesg@ietf.org mailing list) for resolution.

   Criteria that should be applied by the Designated Expert(s) Experts includes
   determining whether the proposed registration duplicates existing
   functionality, determining whether it is likely to be of general applicability or whether it is
   useful only for a single application, and whether the registration
   description is clear.

   IANA must only accept registry updates from the Designated Expert(s) Experts
   and should direct all requests for registration to the review mailing
   list.

   It is suggested that multiple Designated Experts be appointed who are
   able to represent the perspectives of different applications using
   this specification, in order to enable broadly-informed broadly informed review of
   registration decisions.  In cases where a registration decision could
   be perceived as creating a conflict of interest for a particular
   Expert, that Expert should defer to the judgment of the other
   Expert(s).

   [[ Note to the RFC Editor and IANA: Pearl Liang of ICANN had
   requested that the draft supply the following proposed registry
   description information.  It is to be used for all registries
   established by this specification.

   o  Protocol Category: JSON Object Signing and Encryption (JOSE)

   o  Registry Location: http://www.iana.org/assignments/jose

   o  Webpage Title: (same as the protocol category)

   o  Registry Name: (same as the section title, but excluding the word
      "Registry", for example "JSON Web Signature and Encryption Header
      Parameters")

   ]]
   Experts.

9.1.  JSON Web Signature and Encryption Header Parameters Registry

   This specification establishes the IANA JSON "JSON Web Signature and
   Encryption Header Parameters Parameters" registry for Header Parameter names.
   The registry records the Header Parameter name and a reference to the
   specification that defines it.  The same Header Parameter name can be
   registered multiple times, provided that the parameter usage is
   compatible between the specifications.  Different registrations of
   the same Header Parameter name will typically use different Header
   Parameter Usage Location(s) Locations values.

9.1.1.  Registration Template

   Header Parameter Name:
      The name requested (e.g., "kid").  Because a core goal of this
      specification is for the resulting representations to be compact,
      it is RECOMMENDED that the name be short -- not to exceed 8
      characters without a compelling reason to do so.  This name is
      case-sensitive.
      case sensitive.  Names may not match other registered names in a
      case-insensitive manner unless the Designated Expert(s) Experts state that
      there is a compelling reason to allow an exception in this
      particular case. exception.

   Header Parameter Description:
      Brief description of the Header Parameter (e.g., "Key ID").

   Header Parameter Usage Location(s):
      The Header Parameter usage locations, which should be one or more
      of the values "JWS" or "JWE".

   Change Controller:
      For Standards Track RFCs, state list the "IESG".  For others, give the
      name of the responsible party.  Other details (e.g., postal
      address, email address, home page URI) may also be included.

   Specification Document(s):
      Reference to the document(s) document or documents that specify the parameter,
      preferably including URI(s) URIs that can be used to retrieve copies of
      the document(s). documents.  An indication of the relevant sections may also be
      included but is not required.

9.1.2.  Initial Registry Contents

   This specification section registers the Header Parameter names defined in
   Section 4.1 in this registry.

   o  Header Parameter Name: "alg"
   o  Header Parameter Description: Algorithm
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.1 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "jku"
   o  Header Parameter Description: JWK Set URL
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.2 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "jwk"
   o  Header Parameter Description: JSON Web Key
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification document(s): Document(s): Section 4.1.3 of [[ this document ]] RFC 7515
   o  Header Parameter Name: "kid"
   o  Header Parameter Description: Key ID
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.4 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "x5u"
   o  Header Parameter Description: X.509 URL
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.5 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "x5c"
   o  Header Parameter Description: X.509 Certificate Chain
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.6 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "x5t"
   o  Header Parameter Description: X.509 Certificate SHA-1 Thumbprint
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.7 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "x5t#S256"
   o  Header Parameter Description: X.509 Certificate SHA-256 Thumbprint
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.8 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "typ"
   o  Header Parameter Description: Type
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.9 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "cty"
   o  Header Parameter Description: Content Type
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.10 of [[ this document ]] RFC 7515

   o  Header Parameter Name: "crit"
   o  Header Parameter Description: Critical
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 4.1.11 of [[ this document ]] RFC 7515

9.2.  Media Type Registration

9.2.1.  Registry Contents

   This specification section registers the "application/jose" Media Type media type [RFC2046] in
   the MIME Media Types "Media Types" registry [IANA.MediaTypes] in the manner described
   in RFC 6838 [RFC6838], which can be used to indicate that the content
   is a JWS or JWE using the JWS Compact Serialization or the JWE
   Compact Serialization and Serialization.  This section also registers the "application/jose+json"
   Media Type "application/
   jose+json" media type in the MIME Media Types "Media Types" registry, which can be
   used to indicate that the content is a JWS or JWE using the JWS JSON
   Serialization or the JWE JSON Serialization.

   o  Type name: application
   o  Subtype name: jose
   o  Required parameters: n/a
   o  Optional parameters: n/a
   o  Encoding considerations: 8bit; application/jose values are encoded
      as a series of base64url encoded base64url-encoded values (some of which may be the
      empty string) string), each separated from the next by a single period
      ('.') character.
   o  Security considerations: See the Security Considerations section
      of [[ this document ]] RFC 7515.
   o  Interoperability considerations: n/a
   o  Published specification: [[ this document ]] RFC 7515
   o  Applications that use this media type: OpenID Connect, Mozilla
      Persona, Salesforce, Google, Android, Windows Azure, Xbox One,
      Amazon Web Services, and numerous others that use JWTs
   o  Fragment identifier considerations: n/a
   o  Additional information:

         Magic number(s): n/a, n/a
         File extension(s):
      n/a, n/a
         Macintosh file type code(s): n/a

   o  Person & email address to contact for further information:
      Michael B. Jones, mbj@microsoft.com
   o  Intended usage: COMMON
   o  Restrictions on usage: none
   o  Author: Michael B. Jones, mbj@microsoft.com
   o  Change Controller: IESG
   o  Provisional registration?  No
   o  Type name: application
   o  Subtype name: jose+json
   o  Required parameters: n/a
   o  Optional parameters: n/a
   o  Encoding considerations: 8bit; application/jose+json values are
      represented as a JSON Object; UTF-8 encoding SHOULD be employed
      for the JSON object.
   o  Security considerations: See the Security Considerations section
      of [[ this document ]] RFC 7515
   o  Interoperability considerations: n/a
   o  Published specification: [[ this document ]] RFC 7515
   o  Applications that use this media type: TBD Nimbus JOSE + JWT library
   o  Fragment identifier considerations: n/a
   o  Additional information:

         Magic number(s): n/a, n/a
         File extension(s):
      n/a, n/a
         Macintosh file type code(s): n/a

   o  Person & email address to contact for further information:
      Michael B. Jones, mbj@microsoft.com
   o  Intended usage: COMMON
   o  Restrictions on usage: none
   o  Author: Michael B. Jones, mbj@microsoft.com
   o  Change Controller: IESG
   o  Provisional registration?  No

10.  Security Considerations

   All of the security issues that are pertinent to any cryptographic
   application must be addressed by JWS/JWE/JWK agents.  Among these
   issues are protecting the user's asymmetric private and symmetric
   secret keys and employing countermeasures to various attacks.

   All the security considerations in XML DSIG 2.0 "XML Signature Syntax and
   Processing Version 2.0" [W3C.NOTE-xmldsig-core2-20130411], also apply
   to this specification, other than those that are XML specific.
   Likewise, many of the best practices documented in XML "XML Signature
   Best Practices Practices" [W3C.NOTE-xmldsig-bestpractices-20130411] also apply
   to this specification, other than those that are XML specific.

10.1.  Key Entropy and Random Values

   Keys are only as strong as the amount of entropy used to generate
   them.  A minimum of 128 bits of entropy should be used for all keys,
   and depending upon the application context, more may be required.

   Implementations must randomly generate public/private key pairs,
   message authentication (MAC) MAC
   keys, and padding values.  The use of inadequate pseudo-random pseudorandom number
   generators (PRNGs) to generate cryptographic keys can result in
   little or no security.  An attacker may find it much easier to
   reproduce the PRNG environment that produced the keys, searching the
   resulting small set of
   possibilities, possibilities rather than brute force brute-force
   searching the whole key space.  The generation of quality random
   numbers is difficult.  RFC 4086 [RFC4086] offers important guidance
   in this area.

10.2.  Key Protection

   Implementations must protect the signer's private key.  Compromise of
   the signer's private key permits an attacker to masquerade as the
   signer.

   Implementations must protect the message authentication (MAC) MAC key.  Compromise of the MAC key
   may result in undetectable modification of the authenticated content.

10.3.  Key Origin Authentication

   The key management technique employed to obtain public keys must
   authenticate the origin of the key; otherwise, it is unknown what
   party signed the message.

   Likewise, the key management technique employed to distribute MAC
   keys must provide data origin authentication; otherwise, the contents
   are delivered with integrity from an unknown source.

10.4.  Cryptographic Agility

   See Section 8.1 of [JWA] for security considerations on cryptographic
   agility.

10.5.  Differences between Digital Signatures and MACs

   While MACs and digital signatures can both be used for integrity
   checking, there are some significant differences between the security
   properties that each of them provides.  These need to be taken into
   consideration when designing protocols and selecting the algorithms
   to be used in protocols.

   Both signatures and MACs provide for integrity checking -- verifying
   that the message has not been modified since the integrity value was
   computed.  However, MACs provide for origination identification only
   under specific circumstances.  It can normally be assumed that a
   private key used for a signature is only in the hands of a single
   entity (although perhaps a distributed entity, in the case of
   replicated servers); however, a MAC key needs to be in the hands of
   all the entities that use it for integrity computation and checking.
   Validation of a MAC only provides corroboration that the message was
   generated by one of the parties that knows the symmetric MAC key.
   This means that origination can only be determined if a MAC key is
   known only to two entities and the recipient knows that it did not
   create the message.  MAC validation cannot be used to prove
   origination to a third party.

10.6.  Algorithm Validation

   The digital signature representations for some algorithms include
   information about the algorithm used inside the signature value.  For
   instance, signatures produced with RSASSA-PKCS-v1_5 RSASSA-PKCS1-v1_5 [RFC3447] encode
   the hash function used used, and many libraries actually use the hash
   algorithm specified inside the signature when validating the
   signature.  When using such libraries, as part of the algorithm
   validation performed, implementations MUST ensure that the algorithm
   information encoded in the signature corresponds to that specified
   with the "alg" Header Parameter.  If this is not done, an attacker
   could claim to have used a strong hash algorithm while actually using
   a weak one represented in the signature value.

10.7.  Algorithm Protection

   In some usages of JWS, there is a risk of algorithm substitution
   attacks, in which an attacker can use an existing digital signature
   value with a different signature algorithm to make it appear that a
   signer has signed something that it has not.  These attacks have been
   discussed in detail in the context of CMS Cryptographic Message Syntax
   (CMS) [RFC6211].  This risk arises when all of the following are
   true:

   o  Verifiers of a signature support multiple algorithms.

   o  Given an existing signature, an attacker can find another payload
      that produces the same signature value with a different algorithm.

   o  The payload crafted by the attacker is valid in the application
      context.

   There are several ways for an application to mitigate algorithm
   substitution attacks:

   o  Use only digital signature algorithms that are not vulnerable to
      substitution attacks.  Substitution attacks are only feasible if
      an attacker can compute pre-images for a hash function accepted by
      the recipient.  All JWA-defined signature algorithms use SHA-2
      hashes, for which there are no known pre-image attacks, as of the
      time of this writing.

   o  Require that the "alg" Header Parameter be carried in the
      protected header. JWS
      Protected Header.  (This is always the case when using the JWS
      Compact Serialization and is the approach taken by CMS [RFC6211].)

   o  Include a field containing the algorithm in the application
      payload, and require that it be matched with the "alg" Header
      Parameter during verification.  (This is the approach taken by
      PKIX [RFC5280].)

10.8.  Chosen Plaintext Attacks

   Creators of JWSs should not allow third parties to insert arbitrary
   content into the message without adding entropy not controlled by the
   third party.

10.9.  Timing Attacks

   When cryptographic algorithms are implemented in such a way that
   successful operations take a different amount of time than
   unsuccessful operations, attackers may be able to use the time
   difference to obtain information about the keys employed.  Therefore,
   such timing differences must be avoided.

10.10.  Replay Protection

   While not directly in scope for this specification, note that
   applications using JWS (or JWE) objects can thwart replay attacks by
   including a unique message identifier as integrity protected integrity-protected content
   in the JWS (or JWE) message and having the recipient verify that the
   message has not been previously received or acted upon.

10.11.  SHA-1 Certificate Thumbprints

   A SHA-1 hash is used when computing "x5t" (X.509 Certificate certificate SHA-1
   Thumbprint)
   thumbprint) values, for compatibility reasons.  Should an effective
   means of producing SHA-1 hash collisions be developed, developed and should an
   attacker wish to interfere with the use of a known certificate on a
   given system, this could be accomplished by creating another
   certificate whose SHA-1 hash value is the same and adding it to the
   certificate store used by the intended victim.  A prerequisite to
   this attack succeeding is the attacker having write access to the
   intended victim's certificate store.

   Alternatively, the "x5t#S256" (X.509 Certificate certificate SHA-256 Thumbprint) thumbprint)
   Header Parameter could be used instead of "x5t".  However, at the
   time of this writing, no development platform is known to support
   SHA-256 certificate thumbprints.

10.12.  JSON Security Considerations

   Strict JSON [RFC7159] validation is a security requirement.  If
   malformed JSON is received, then the intent of the producer is
   impossible to reliably discern.  Ambiguous and potentially
   exploitable situations could arise if the JSON parser used does not
   reject malformed JSON syntax.  In particular, any JSON inputs not
   conforming to the JSON-text syntax defined in RFC 7159 input MUST be
   rejected in their entirety by JSON parsers.

   Section 4 of the JSON "The JavaScript Object Notation (JSON) Data Interchange Format specification
   Format" [RFC7159]
   states states, "The names within an object SHOULD be
   unique", whereas this specification states that "Header

      The Header Parameter names within this object the JOSE Header MUST be unique;
      JWS parsers MUST either reject JWSs with duplicate Header
      Parameter names or use a JSON parser that returns only the
      lexically last duplicate member name, as specified in
      Section 15.12
   (The ("The JSON Object) Object") of ECMAScript 5.1 [ECMAScript]". [ECMAScript].

   Thus, this specification requires that the "SHOULD" in Section 4 "SHOULD" of
   [RFC7159] be treated as a "MUST" by producers and that it be either
   treated as a "MUST" or treated in the manner specified in ECMAScript
   5.1 by consumers.  Ambiguous and potentially exploitable situations
   could arise if the JSON parser used does not enforce the uniqueness
   of member names or returns an unpredictable value for duplicate
   member names.

   Some JSON parsers might not reject input that contains extra
   significant characters after a valid input.  For instance, the input
   "{"tag":"value"}ABCD" contains a valid JSON-text object followed by
   the extra characters "ABCD".  Implementations MUST consider JWSs
   containing such input to be invalid.

10.13.  Unicode Comparison Security Considerations

   Header Parameter names and algorithm names are Unicode strings.  For
   security reasons, the representations of these names must be compared
   verbatim after performing any escape processing (as per Section 8.3
   of RFC 7159 [RFC7159]).  This means, for instance, that these JSON
   strings must compare as being equal ("sig", "\u0073ig"), whereas
   these must all compare as being not equal to the first set or to each
   other ("SIG", "Sig", "si\u0047").

   JSON strings can contain characters outside the Unicode Basic
   Multilingual Plane.  For instance, the G clef character (U+1D11E) may
   be represented in a JSON string as "\uD834\uDD1E".  Ideally, JWS
   implementations SHOULD ensure that characters outside the Basic
   Multilingual Plane are preserved and compared correctly;
   alternatively, if this is not possible due to these characters
   exercising limitations present in the underlying JSON implementation,
   then input containing them MUST be rejected.

11.  References

11.1.  Normative References

   [ECMAScript] Ecma International, "ECMAScript Language Specification,
                5.1 Edition", ECMA 262, June 2011. 2011,
                <http://www.ecma-international.org/ecma-262/5.1/
                ECMA-262.pdf>.

   [IANA.MediaTypes]
              Internet Assigned Numbers Authority (IANA), "MIME Media
                IANA, "Media Types", 2005.

   [ITU.X690.1994]
                <http://www.iana.org/assignments/media-types>.

   [ITU.X690.2008]
                International Telecommunications Union, "Information
                Technology - ASN.1 encoding rules: Specification of
                Basic Encoding Rules (BER), Canonical Encoding Rules
                (CER) and Distinguished Encoding Rules (DER)", ITU-T
                Recommendation X.690, 1994. 2008.

   [JWA]        Jones, M., "JSON Web Algorithms (JWA)",
              draft-ietf-jose-json-web-algorithms (work in progress),
              January 2015. RFC 7518,
                DOI 10.17487/RFC7518, May 2015,
                <http://www.rfc-editor.org/info/rfc7518>.

   [JWK]        Jones, M., "JSON Web Key (JWK)",
              draft-ietf-jose-json-web-key (work in progress),
              January 2015. RFC 7517,
                DOI 10.17487/RFC7517, May 2015,
                <http://www.rfc-editor.org/info/rfc7517>.

   [RFC20]      Cerf, V., "ASCII format for Network Interchange",
                STD 80, RFC 20, DOI 10.17487/RFC0020, October 1969. 1969,
                <http://www.rfc-editor.org/info/rfc20>.

   [RFC2045]    Freed, N. and N. Borenstein, "Multipurpose Internet Mail
                Extensions (MIME) Part One: Format of Internet Message
                Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996. 1996,
                <http://www.rfc-editor.org/info/rfc2045>.

   [RFC2046]    Freed, N. and N. Borenstein, "Multipurpose Internet Mail
                Extensions (MIME) Part Two: Media Types", RFC 2046,
                DOI 10.17487/RFC2046, November 1996. 1996,
                <http://www.rfc-editor.org/info/rfc2046>.

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirement Levels", BCP 14, RFC 2119,
                DOI 10.17487/RFC2119, March 1997. 1997,
                <http://www.rfc-editor.org/info/rfc2119>.

   [RFC2818]    Rescorla, E., "HTTP Over TLS", RFC 2818,
                DOI 10.17487/RFC2818, May 2000. 2000,
                <http://www.rfc-editor.org/info/rfc2818>.

   [RFC3629]    Yergeau, F., "UTF-8, a transformation format of ISO
                10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November 2003.
                2003, <http://www.rfc-editor.org/info/rfc3629>.

   [RFC3986]    Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
                Resource Identifier (URI): Generic Syntax", STD 66,
                RFC 3986, DOI 10.17487/RFC3986, January 2005. 2005,
                <http://www.rfc-editor.org/info/rfc3986>.

   [RFC4648]    Josefsson, S., "The Base16, Base32, and Base64 Data
                Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006.
                2006, <http://www.rfc-editor.org/info/rfc4648>.

   [RFC4945]    Korver, B., "The Internet IP Security PKI Profile of
                IKEv1/ISAKMP, IKEv2, and PKIX", RFC 4945,
                DOI 10.17487/RFC4945, August 2007. 2007,
                <http://www.rfc-editor.org/info/rfc4945>.

   [RFC4949]    Shirey, R., "Internet Security Glossary, Version 2",
                FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007. 2007,
                <http://www.rfc-editor.org/info/rfc4949>.

   [RFC5246]    Dierks, T. and E. Rescorla, "The Transport Layer
                Security (TLS) Protocol Version 1.2", RFC 5246,
                DOI 10.17487/RFC5246, August 2008. 2008,
                <http://www.rfc-editor.org/info/rfc5246>.

   [RFC5280]    Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
                Housley, R., and W. Polk, "Internet X.509 Public Key
                Infrastructure Certificate and Certificate Revocation
                List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008.
                2008, <http://www.rfc-editor.org/info/rfc5280>.

   [RFC6125]    Saint-Andre, P. and J. Hodges, "Representation and
                Verification of Domain-Based Application Service
                Identity within Internet Public Key Infrastructure Using
                X.509 (PKIX) Certificates in the Context of Transport
                Layer Security (TLS)", RFC 6125, DOI 10.17487/RFC6125,
                March 2011. 2011, <http://www.rfc-editor.org/info/rfc6125>.

   [RFC6176]    Turner, S. and T. Polk, "Prohibiting Secure Sockets
                Layer (SSL) Version 2.0", RFC 6176,
                DOI 10.17487/RFC6176, March 2011. 2011,
                <http://www.rfc-editor.org/info/rfc6176>.

   [RFC7159]    Bray, T., Ed., "The JavaScript Object Notation (JSON)
                Data Interchange Format", RFC 7159,
                DOI 10.17487/RFC7159, March 2014. 2014,
                <http://www.rfc-editor.org/info/rfc7159>.

   [UNICODE]    The Unicode Consortium, "The Unicode Standard", 1991-,
                <http://www.unicode.org/versions/latest/>.

11.2.  Informative References

   [CanvasApp]  Facebook, "Canvas Applications", 2010.

   [I-D.ietf-uta-tls-bcp]
              Sheffer, Y., Holz, R., and P. Saint-Andre,
              "Recommendations for Secure Use of TLS and DTLS",
              draft-ietf-uta-tls-bcp-08 (work in progress),
              December 2014.
                <http://developers.facebook.com/docs/authentication/
                canvas>.

   [JSS]        Bradley, J. and N. Sakimura (editor), Sakimura, Ed., "JSON Simple Sign",
                September 2010. 2010, <http://jsonenc.info/jss/1.0/>.

   [JWE]        Jones, M. and J. Hildebrand, "JSON Web Encryption
                (JWE)",
              draft-ietf-jose-json-web-encryption (work in progress),
              January 2015. RFC 7516, DOI 10.17487/RFC7516, May 2015,
                <http://www.rfc-editor.org/info/rfc7516>.

   [JWT]        Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
                (JWT)", draft-ietf-oauth-json-web-token (work in
              progress), January 2015. RFC 7519, DOI 10.17487/RFC7519, May 2015,
                <http://www.rfc-editor.org/info/rfc7519>.

   [MagicSignatures]
              Panzer (editor),
                Panzer, J., Ed., Laurie, B., and D. Balfanz, "Magic
                Signatures", January 2011. 2011, <http://salmon-
                protocol.googlecode.com/svn/trunk/
                draft-panzer-magicsig-01.html>.

   [RFC2104]    Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing
                Keyed-Hashing for Message Authentication", RFC 2104,
                DOI 10.17487/RFC2104, February 1997. 1997,
                <http://www.rfc-editor.org/info/rfc2104>.

   [RFC3447]    Jonsson, J. and B. Kaliski, "Public-Key Cryptography
                Standards (PKCS) #1: RSA Cryptography Specifications
                Version 2.1", RFC 3447, DOI 10.17487/RFC3447, February 2003.
                2003, <http://www.rfc-editor.org/info/rfc3447>.

   [RFC4086]  Eastlake,    Eastlake 3rd, D., Schiller, J., and S. Crocker,
                "Randomness Requirements for Security", BCP 106,
                RFC 4086, DOI 10.17487/RFC4086, June 2005. 2005,
                <http://www.rfc-editor.org/info/rfc4086>.

   [RFC4122]    Leach, P., Mealling, M., and R. Salz, "A Universally
                Unique IDentifier (UUID) URN Namespace", RFC 4122,
                DOI 10.17487/RFC4122, July 2005. 2005,
                <http://www.rfc-editor.org/info/rfc4122>.

   [RFC5226]    Narten, T. and H. Alvestrand, "Guidelines for Writing an
                IANA Considerations Section in RFCs", BCP 26, RFC 5226,
                DOI 10.17487/RFC5226, May 2008. 2008,
                <http://www.rfc-editor.org/info/rfc5226>.

   [RFC6211]    Schaad, J., "Cryptographic Message Syntax (CMS)
                Algorithm Identifier Protection Attribute", RFC 6211,
                DOI 10.17487/RFC6211, April 2011. 2011,
                <http://www.rfc-editor.org/info/rfc6211>.

   [RFC6838]    Freed, N., Klensin, J., and T. Hansen, "Media Type
                Specifications and Registration Procedures", BCP 13,
                RFC 6838, DOI 10.17487/RFC6838, January 2013. 2013,
                <http://www.rfc-editor.org/info/rfc6838>.

   [RFC7525]    Sheffer, Y., Holz, R., and P. Saint-Andre,
                "Recommendations for Secure Use of Transport Layer
                Security (TLS) and Datagram Transport Layer Security
                (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
                2015, <http://www.rfc-editor.org/info/rfc7525>.

   [SHS]        National Institute of Standards and Technology, "Secure
                Hash Standard (SHS)", FIPS PUB 180-4, March 2012. 2012,
                <http://csrc.nist.gov/publications/fips/fips180-4/
                fips-180-4.pdf>.

   [W3C.NOTE-xmldsig-bestpractices-20130411]
                Hirsch, F. and P. Datta, "XML Signature Best Practices",
                World Wide Web Consortium Note NOTE-xmldsig-bestpractices-
              20130411,
                NOTE-xmldsig-bestpractices-20130411, April 2013,
                <http://www.w3.org/TR/2013/
                NOTE-xmldsig-bestpractices-20130411/>.

   [W3C.NOTE-xmldsig-core2-20130411]
                Eastlake, D., Reagle, J., Solo, D., Hirsch, F.,
                Roessler, T., Yiu, K., Datta, P., and S. Cantor, "XML
                Signature Syntax and Processing Version 2.0", World Wide
                Web Consortium Note NOTE-xmldsig-core2-20130411, April
                2013,
                <http://www.w3.org/TR/2013/NOTE-xmldsig-core2-20130411/>.

Appendix A.  JWS Examples

   This section provides several examples of JWSs.  While the first
   three examples all represent JSON Web Tokens (JWTs) [JWT], the
   payload can be any octet sequence, as shown in Appendix A.4.

A.1.  Example JWS using Using HMAC SHA-256

A.1.1.  Encoding

   The following example JWS Protected Header declares that the data
   structure is a JSON Web Token (JWT) JWT [JWT] and the JWS Signing Input is secured using
   the HMAC SHA-256 algorithm.

     {"typ":"JWT",
      "alg":"HS256"}

   To remove potential ambiguities in the representation of the JSON
   object above, the actual octet sequence representing UTF8(JWS
   Protected Header) used in this example is also included below.  (Note
   that ambiguities can arise due to differing platform representations
   of line breaks (CRLF versus LF), differing spacing at the beginning
   and ends of lines, whether the last line has a terminating line break
   or not, and other causes.  In the representation used in this
   example, the first line has no leading or trailing spaces, a CRLF
   line break (13, 10) occurs between the first and second lines, the
   second line has one leading space (32) and no trailing spaces, and
   the last line does not have a terminating line break.)  The octets
   representing UTF8(JWS Protected Header) in this example (using JSON
   array notation) are:

   [123, 34, 116, 121, 112, 34, 58, 34, 74, 87, 84, 34, 44, 13, 10, 32,
   34, 97, 108, 103, 34, 58, 34, 72, 83, 50, 53, 54, 34, 125]

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9

   The JWS Payload used in this example is the octets of the UTF-8
   representation of the JSON object below.  (Note that the payload can
   be any base64url encoded base64url-encoded octet sequence, sequence and need not be a base64url base64url-
   encoded JSON object.)

     {"iss":"joe",
      "exp":1300819380,
      "http://example.com/is_root":true}
   The following octet sequence, which is the UTF-8 representation used
   in this example for the JSON object above, is the JWS Payload:

   [123, 34, 105, 115, 115, 34, 58, 34, 106, 111, 101, 34, 44, 13, 10,
   32, 34, 101, 120, 112, 34, 58, 49, 51, 48, 48, 56, 49, 57, 51, 56,
   48, 44, 13, 10, 32, 34, 104, 116, 116, 112, 58, 47, 47, 101, 120, 97,
   109, 112, 108, 101, 46, 99, 111, 109, 47, 105, 115, 95, 114, 111,
   111, 116, 34, 58, 116, 114, 117, 101, 125]

   Encoding this JWS Protected Header Payload as BASE64URL(UTF8(JWS Protected
   Header)) Payload)) gives this
   value (with line breaks for display purposes only):

     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   Combining these as BASE64URL(UTF8(JWS Protected Header)) || '.' ||
   BASE64URL(JWS Payload) gives this string (with line breaks for
   display purposes only):

     eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   The resulting JWS Signing Input value, which is the ASCII
   representation of above string, is the following octet sequence
   (using JSON array notation):

   [101, 121, 74, 48, 101, 88, 65, 105, 79, 105, 74, 75, 86, 49, 81,
   105, 76, 65, 48, 75, 73, 67, 74, 104, 98, 71, 99, 105, 79, 105, 74,
   73, 85, 122, 73, 49, 78, 105, 74, 57, 46, 101, 121, 74, 112, 99, 51,
   77, 105, 79, 105, 74, 113, 98, 50, 85, 105, 76, 65, 48, 75, 73, 67,
   74, 108, 101, 72, 65, 105, 79, 106, 69, 122, 77, 68, 65, 52, 77, 84,
   107, 122, 79, 68, 65, 115, 68, 81, 111, 103, 73, 109, 104, 48, 100,
   72, 65, 54, 76, 121, 57, 108, 101, 71, 70, 116, 99, 71, 120, 108, 76,
   109, 78, 118, 98, 83, 57, 112, 99, 49, 57, 121, 98, 50, 57, 48, 73,
   106, 112, 48, 99, 110, 86, 108, 102, 81]

   HMACs are generated using keys.  This example uses the symmetric key
   represented in JSON Web Key [JWK] format below (with line breaks
   within values for display purposes only):

     {"kty":"oct",
      "k":"AyM1SysPpbyDfgZld3umj1qzKObwVMkoqQ-EstJQLr_T-1qS0gZH75
           aKtMN3Yj0iPS4hcgUuTwjAzZr1Z9CAow"
     }
   Running the HMAC SHA-256 algorithm on the JWS Signing Input with this
   key yields this JWS Signature octet sequence:

   [116, 24, 223, 180, 151, 153, 224, 37, 79, 250, 96, 125, 216, 173,
   187, 186, 22, 212, 37, 77, 105, 214, 191, 240, 91, 88, 5, 88, 83,
   132, 141, 121]

   Encoding this JWS Signature as BASE64URL(JWS Signature) gives this
   value:

     dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
     .
     dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk

A.1.2.  Validating

   Since the "alg" Header Parameter is "HS256", we validate the HMAC
   SHA-256 value contained in the JWS Signature.

   To validate the HMAC value, we repeat the previous process of using
   the correct key and the JWS Signing Input (which is the initial
   substring of the JWS Compact Serialization representation up until
   but not including the second period character) as input to the HMAC
   SHA-256 function and then taking the output and determining if it
   matches the JWS Signature (which is base64url decoded from the value
   encoded in the JWS representation).  If it matches exactly, the HMAC
   has been validated.

A.2.  Example JWS using RSASSA-PKCS-v1_5 Using RSASSA-PKCS1-v1_5 SHA-256

A.2.1.  Encoding

   The JWS Protected Header in this example is different from the
   previous example in two ways: ways.  First, because a different algorithm
   is being used, the "alg" value is different.  Second, for
   illustration purposes only, the optional "typ" parameter (type) Header
   Parameter is not used.  (This difference is not related to the
   algorithm employed.)  The JWS Protected Header used is:

     {"alg":"RS256"}

   The octets representing UTF8(JWS Protected Header) in this example
   (using JSON array notation) are:

   [123, 34, 97, 108, 103, 34, 58, 34, 82, 83, 50, 53, 54, 34, 125]

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJSUzI1NiJ9

   The JWS Payload used in this example, which follows, is the same as
   in the previous example.  Since the BASE64URL(JWS Payload) value will
   therefore be the same, its computation is not repeated here.

     {"iss":"joe",
      "exp":1300819380,
      "http://example.com/is_root":true}

   Combining these as BASE64URL(UTF8(JWS Protected Header)) || '.' ||
   BASE64URL(JWS Payload) gives this string (with line breaks for
   display purposes only):

     eyJhbGciOiJSUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   The resulting JWS Signing Input value, which is the ASCII
   representation of above string, is the following octet sequence:

   [101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 83, 85, 122, 73,
   49, 78, 105, 74, 57, 46, 101, 121, 74, 112, 99, 51, 77, 105, 79, 105,
   74, 113, 98, 50, 85, 105, 76, 65, 48, 75, 73, 67, 74, 108, 101, 72,
   65, 105, 79, 106, 69, 122, 77, 68, 65, 52, 77, 84, 107, 122, 79, 68,
   65, 115, 68, 81, 111, 103, 73, 109, 104, 48, 100, 72, 65, 54, 76,
   121, 57, 108, 101, 71, 70, 116, 99, 71, 120, 108, 76, 109, 78, 118,
   98, 83, 57, 112, 99, 49, 57, 121, 98, 50, 57, 48, 73, 106, 112, 48,
   99, 110, 86, 108, 102, 81]
   This example uses the RSA key represented in JSON Web Key [JWK]
   format below (with line breaks within values for display purposes
   only):

     {"kty":"RSA",
      "n":"ofgWCuLjybRlzo0tZWJjNiuSfb4p4fAkd_wWJcyQoTbji9k0l8W26mPddx
           HmfHQp-Vaw-4qPCJrcS2mJPMEzP1Pt0Bm4d4QlL-yRT-SFd2lZS-pCgNMs
           D1W_YpRPEwOWvG6b32690r2jZ47soMZo9wGzjb_7OMg0LOL-bSf63kpaSH
           SXndS5z5rexMdbBYUsLA9e-KXBdQOS-UTo7WTBEMa2R2CapHg665xsmtdV
           MTBQY4uDZlxvb3qCo5ZwKh9kG4LT6_I5IhlJH7aGhyxXFvUK-DWNmoudF8
           NAco9_h9iaGNj8q2ethFkMLs91kzk2PAcDTW9gb54h4FRWyuXpoQ",
      "e":"AQAB",
      "d":"Eq5xpGnNCivDflJsRQBXHx1hdR1k6Ulwe2JZD50LpXyWPEAeP88vLNO97I
           jlA7_GQ5sLKMgvfTeXZx9SE-7YwVol2NXOoAJe46sui395IW_GO-pWJ1O0
           BkTGoVEn2bKVRUCgu-GjBVaYLU6f3l9kJfFNS3E0QbVdxzubSu3Mkqzjkn
           439X0M_V51gfpRLI9JYanrC4D4qAdGcopV_0ZHHzQlBjudU2QvXt4ehNYT
           CBr6XCLQUShb1juUO1ZdiYoFaFQT5Tw8bGUl_x_jTj3ccPDVZFD9pIuhLh
           BOneufuBiB4cS98l2SR_RQyGWSeWjnczT0QU91p1DhOVRuOopznQ",
      "p":"4BzEEOtIpmVdVEZNCqS7baC4crd0pqnRH_5IB3jw3bcxGn6QLvnEtfdUdi
           YrqBdss1l58BQ3KhooKeQTa9AB0Hw_Py5PJdTJNPY8cQn7ouZ2KKDcmnPG
           BY5t7yLc1QlQ5xHdwW1VhvKn-nXqhJTBgIPgtldC-KDV5z-y2XDwGUc",
      "q":"uQPEfgmVtjL0Uyyx88GZFF1fOunH3-7cepKmtH4pxhtCoHqpWmT8YAmZxa
           ewHgHAjLYsp1ZSe7zFYHj7C6ul7TjeLQeZD_YwD66t62wDmpe_HlB-TnBA
           -njbglfIsRLtXlnDzQkv5dTltRJ11BKBBypeeF6689rjcJIDEz9RWdc",
      "dp":"BwKfV3Akq5_MFZDFZCnW-wzl-CCo83WoZvnLQwCTeDv8uzluRSnm71I3Q
           CLdhrqE2e9YkxvuxdBfpT_PI7Yz-FOKnu1R6HsJeDCjn12Sk3vmAktV2zb
           34MCdy7cpdTh_YVr7tss2u6vneTwrA86rZtu5Mbr1C1XsmvkxHQAdYo0",
      "dq":"h_96-mK1R_7glhsum81dZxjTnYynPbZpHziZjeeHcXYsXaaMwkOlODsWa
           7I9xXDoRwbKgB719rrmI2oKr6N3Do9U0ajaHF-NKJnwgjMd2w9cjz3_-ky
           NlxAr2v4IKhGNpmM5iIgOS1VZnOZ68m6_pbLBSp3nssTdlqvd0tIiTHU",
      "qi":"IYd7DHOhrWvxkwPQsRM2tOgrjbcrfvtQJipd-DlcxyVuuM9sQLdgjVk2o
           y26F0EmpScGLq2MowX7fhd_QJQ3ydy5cY7YIBi87w93IKLEdfnbJtoOPLU
           W0ITrJReOgo1cq9SbsxYawBgfp_gh6A5603k2-ZQwVK0JKSHuLFkuQ3U"
     }
   The RSA private key is then passed to the RSA signing function, which
   also takes the hash type, SHA-256, and the JWS Signing Input as
   inputs.  The result of the digital signature is an octet sequence,
   which represents a big endian big-endian integer.  In this example, it is:

   [112, 46, 33, 137, 67, 232, 143, 209, 30, 181, 216, 45, 191, 120, 69,
   243, 65, 6, 174, 27, 129, 255, 247, 115, 17, 22, 173, 209, 113, 125,
   131, 101, 109, 66, 10, 253, 60, 150, 238, 221, 115, 162, 102, 62, 81,
   102, 104, 123, 0, 11, 135, 34, 110, 1, 135, 237, 16, 115, 249, 69,
   229, 130, 173, 252, 239, 22, 216, 90, 121, 142, 232, 198, 109, 219,
   61, 184, 151, 91, 23, 208, 148, 2, 190, 237, 213, 217, 217, 112, 7,
   16, 141, 178, 129, 96, 213, 248, 4, 12, 167, 68, 87, 98, 184, 31,
   190, 127, 249, 217, 46, 10, 231, 111, 36, 242, 91, 51, 187, 230, 244,
   74, 230, 30, 177, 4, 10, 203, 32, 4, 77, 62, 249, 18, 142, 212, 1,
   48, 121, 91, 212, 189, 59, 65, 238, 202, 208, 102, 171, 101, 25, 129,
   253, 228, 141, 247, 127, 55, 45, 195, 139, 159, 175, 221, 59, 239,
   177, 139, 93, 163, 204, 60, 46, 176, 47, 158, 58, 65, 214, 18, 202,
   173, 21, 145, 18, 115, 160, 95, 35, 185, 232, 56, 250, 175, 132, 157,
   105, 132, 41, 239, 90, 30, 136, 121, 130, 54, 195, 212, 14, 96, 69,
   34, 165, 68, 200, 242, 122, 122, 45, 184, 6, 99, 209, 108, 247, 202,
   234, 86, 222, 64, 92, 178, 33, 90, 69, 178, 194, 85, 102, 181, 90,
   193, 167, 72, 160, 112, 223, 200, 163, 42, 70, 149, 67, 208, 25, 238,
   251, 71]

   Encoding the signature as BASE64URL(JWS Signature) produces this
   value (with line breaks for display purposes only):

     cC4hiUPoj9Eetdgtv3hF80EGrhuB__dzERat0XF9g2VtQgr9PJbu3XOiZj5RZmh7
     AAuHIm4Bh-0Qc_lF5YKt_O8W2Fp5jujGbds9uJdbF9CUAr7t1dnZcAcQjbKBYNX4
     BAynRFdiuB--f_nZLgrnbyTyWzO75vRK5h6xBArLIARNPvkSjtQBMHlb1L07Qe7K
     0GarZRmB_eSN9383LcOLn6_dO--xi12jzDwusC-eOkHWEsqtFZESc6BfI7noOPqv
     hJ1phCnvWh6IeYI2w9QOYEUipUTI8np6LbgGY9Fs98rqVt5AXLIhWkWywlVmtVrB
     p0igcN_IoypGlUPQGe77Rw
   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJhbGciOiJSUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
     .
     cC4hiUPoj9Eetdgtv3hF80EGrhuB__dzERat0XF9g2VtQgr9PJbu3XOiZj5RZmh7
     AAuHIm4Bh-0Qc_lF5YKt_O8W2Fp5jujGbds9uJdbF9CUAr7t1dnZcAcQjbKBYNX4
     BAynRFdiuB--f_nZLgrnbyTyWzO75vRK5h6xBArLIARNPvkSjtQBMHlb1L07Qe7K
     0GarZRmB_eSN9383LcOLn6_dO--xi12jzDwusC-eOkHWEsqtFZESc6BfI7noOPqv
     hJ1phCnvWh6IeYI2w9QOYEUipUTI8np6LbgGY9Fs98rqVt5AXLIhWkWywlVmtVrB
     p0igcN_IoypGlUPQGe77Rw

A.2.2.  Validating

   Since the "alg" Header Parameter is "RS256", we validate the RSASSA-
   PKCS-v1_5
   PKCS1-v1_5 SHA-256 digital signature contained in the JWS Signature.

   Validating the JWS Signature is a bit different from the previous
   example.  We pass the public key (n, e), the JWS Signature (which is
   base64url decoded from the value encoded in the JWS representation),
   and the JWS Signing Input (which is the initial substring of the JWS
   Compact Serialization representation up until but not including the
   second period character) to an RSASSA-PKCS-v1_5 RSASSA-PKCS1-v1_5 signature verifier
   that has been configured to use the SHA-256 hash function.

A.3.  Example JWS using Using ECDSA P-256 SHA-256

A.3.1.  Encoding

   The JWS Protected Header for this example differs from the previous
   example because a different algorithm is being used.  The JWS
   Protected Header used is:

     {"alg":"ES256"}

   The octets representing UTF8(JWS Protected Header) in this example
   (using JSON array notation) are:

   [123, 34, 97, 108, 103, 34, 58, 34, 69, 83, 50, 53, 54, 34, 125]
   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJFUzI1NiJ9

   The JWS Payload used in this example, which follows, is the same as
   in the previous examples.  Since the BASE64URL(JWS Payload) value
   will therefore be the same, its computation is not repeated here.

     {"iss":"joe",
      "exp":1300819380,
      "http://example.com/is_root":true}

   Combining these as BASE64URL(UTF8(JWS Protected Header)) || '.' ||
   BASE64URL(JWS Payload) gives this string (with line breaks for
   display purposes only):

     eyJhbGciOiJFUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   The resulting JWS Signing Input value, which is the ASCII
   representation of above string, is the following octet sequence:

   [101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 70, 85, 122, 73,
   49, 78, 105, 74, 57, 46, 101, 121, 74, 112, 99, 51, 77, 105, 79, 105,
   74, 113, 98, 50, 85, 105, 76, 65, 48, 75, 73, 67, 74, 108, 101, 72,
   65, 105, 79, 106, 69, 122, 77, 68, 65, 52, 77, 84, 107, 122, 79, 68,
   65, 115, 68, 81, 111, 103, 73, 109, 104, 48, 100, 72, 65, 54, 76,
   121, 57, 108, 101, 71, 70, 116, 99, 71, 120, 108, 76, 109, 78, 118,
   98, 83, 57, 112, 99, 49, 57, 121, 98, 50, 57, 48, 73, 106, 112, 48,
   99, 110, 86, 108, 102, 81]

   This example uses the elliptic curve Elliptic Curve key represented in JSON Web Key
   [JWK] format below:

     {"kty":"EC",
      "crv":"P-256",
      "x":"f83OJ3D2xF1Bg8vub9tLe1gHMzV76e8Tus9uPHvRVEU",
      "y":"x_FEzRu9m36HLN_tue659LNpXW6pCyStikYjKIWI5a0",
      "d":"jpsQnnGQmL-YBIffH1136cspYG6-0iY7X1fCE9-E9LI"
     }

   The ECDSA Elliptic Curve Digital Signature Algorithm (ECDSA) private part d
   is then passed to an ECDSA signing function, which also takes the
   curve type, P-256, the hash type, SHA-256, and the JWS Signing Input
   as inputs.  The result of the digital signature is the EC Elliptic Curve
   (EC) point (R, S), where R and S are unsigned integers.  In this
   example, the R and S values, given as octet sequences representing
   big endian
   big-endian integers are:

   +--------+----------------------------------------------------------+
   | Result | Value                                                    |
   | Name   |                                                          |
   +--------+----------------------------------------------------------+
   | R      | [14, 209, 33, 83, 121, 99, 108, 72, 60, 47, 127, 21, 88, |
   |        | 7, 212, 2, 163, 178, 40, 3, 58, 249, 124, 126, 23, 129,  |
   |        | 154, 195, 22, 158, 166, 101]                             |
   | S      | [197, 10, 7, 211, 140, 60, 112, 229, 216, 241, 45, 175,  |
   |        | 8, 74, 84, 128, 166, 101, 144, 197, 242, 147, 80, 154,   |
   |        | 143, 63, 127, 138, 131, 163, 84, 213]                    |
   +--------+----------------------------------------------------------+

   The JWS Signature is the value R || S.  Encoding the signature as
   BASE64URL(JWS Signature) produces this value (with line breaks for
   display purposes only):

     DtEhU3ljbEg8L38VWAfUAqOyKAM6-Xx-F4GawxaepmXFCgfTjDxw5djxLa8ISlSA
     pmWQxfKTUJqPP3-Kg6NU1Q

   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJhbGciOiJFUzI1NiJ9
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
     .
     DtEhU3ljbEg8L38VWAfUAqOyKAM6-Xx-F4GawxaepmXFCgfTjDxw5djxLa8ISlSA
     pmWQxfKTUJqPP3-Kg6NU1Q

A.3.2.  Validating

   Since the "alg" Header Parameter is "ES256", we validate the ECDSA
   P-256 SHA-256 digital signature contained in the JWS Signature.

   Validating the JWS Signature is a bit different from the previous
   examples.  We need to split the 64 member octet sequence of the JWS
   Signature (which is base64url decoded from the value encoded in the
   JWS representation) into two 32 octet sequences, the first
   representing R and the second S.  We then pass the public key (x, y),
   the signature (R, S), and the JWS Signing Input (which is the initial
   substring of the JWS Compact Serialization representation up until
   but not including the second period character) to an ECDSA signature
   verifier that has been configured to use the P-256 curve with the
   SHA-256 hash function.

A.4.  Example JWS using Using ECDSA P-521 SHA-512

A.4.1.  Encoding

   The JWS Protected Header for this example differs from the previous
   example because different ECDSA curves and hash functions are used.
   The JWS Protected Header used is:

     {"alg":"ES512"}

   The octets representing UTF8(JWS Protected Header) in this example
   (using JSON array notation) are:

   [123, 34, 97, 108, 103, 34, 58, 34, 69, 83, 53, 49, 50, 34, 125]

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJFUzUxMiJ9

   The JWS Payload used in this example, example is the ASCII string "Payload".
   The representation of this string is the following octet sequence:

   [80, 97, 121, 108, 111, 97, 100]

   Encoding this JWS Payload as BASE64URL(JWS Payload) gives this value:

     UGF5bG9hZA

   Combining these as BASE64URL(UTF8(JWS Protected Header)) || '.' ||
   BASE64URL(JWS Payload) gives this string:

     eyJhbGciOiJFUzUxMiJ9.UGF5bG9hZA

   The resulting JWS Signing Input value, which is the ASCII
   representation of above string, is the following octet sequence:

   [101, 121, 74, 104, 98, 71, 99, 105, 79, 105, 74, 70, 85, 122, 85,
   120, 77, 105, 74, 57, 46, 85, 71, 70, 53, 98, 71, 57, 104, 90, 65]
   This example uses the elliptic curve Elliptic Curve key represented in JSON Web Key
   [JWK] format below (with line breaks within values for display
   purposes only):

     {"kty":"EC",
      "crv":"P-521",
      "x":"AekpBQ8ST8a8VcfVOTNl353vSrDCLLJXmPk06wTjxrrjcBpXp5EOnYG_
           NjFZ6OvLFV1jSfS9tsz4qUxcWceqwQGk",
      "y":"ADSmRA43Z1DSNx_RvcLI87cdL07l6jQyyBXMoxVg_l2Th-x3S1WDhjDl
           y79ajL4Kkd0AZMaZmh9ubmf63e3kyMj2",
      "d":"AY5pb7A0UFiB3RELSD64fTLOSV_jazdF7fLYyuTw8lOfRhWg6Y6rUrPA
           xerEzgdRhajnu0ferB0d53vM9mE15j2C"
     }

   The ECDSA private part d is then passed to an ECDSA signing function,
   which also takes the curve type, P-521, the hash type, SHA-512, and
   the JWS Signing Input as inputs.  The result of the digital signature
   is the EC point (R, S), where R and S are unsigned integers.  In this
   example, the R and S values, given as octet sequences representing
   big endian
   big-endian integers are:

   +--------+----------------------------------------------------------+
   | Result | Value                                                    |
   | Name   |                                                          |
   +--------+----------------------------------------------------------+
   | R      | [1, 220, 12, 129, 231, 171, 194, 209, 232, 135, 233,     |
   |        | 117, 247, 105, 122, 210, 26, 125, 192, 1, 217, 21, 82,   |
   |        | 91, 45, 240, 255, 83, 19, 34, 239, 71, 48, 157, 147,     |
   |        | 152, 105, 18, 53, 108, 163, 214, 68, 231, 62, 153, 150,  |
   |        | 106, 194, 164, 246, 72, 143, 138, 24, 50, 129, 223, 133, |
   |        | 206, 209, 172, 63, 237, 119, 109]                        |
   | S      | [0, 111, 6, 105, 44, 5, 41, 208, 128, 61, 152, 40, 92,   |
   |        | 61, 152, 4, 150, 66, 60, 69, 247, 196, 170, 81, 193,     |
   |        | 199, 78, 59, 194, 169, 16, 124, 9, 143, 42, 142, 131,    |
   |        | 48, 206, 238, 34, 175, 83, 203, 220, 159, 3, 107, 155,   |
   |        | 22, 27, 73, 111, 68, 68, 21, 238, 144, 229, 232, 148,    |
   |        | 188, 222, 59, 242, 103]                                  |
   +--------+----------------------------------------------------------+

   The JWS Signature is the value R || S.  Encoding the signature as
   BASE64URL(JWS Signature) produces this value (with line breaks for
   display purposes only):

     AdwMgeerwtHoh-l192l60hp9wAHZFVJbLfD_UxMi70cwnZOYaRI1bKPWROc-mZZq
     wqT2SI-KGDKB34XO0aw_7XdtAG8GaSwFKdCAPZgoXD2YBJZCPEX3xKpRwcdOO8Kp
     EHwJjyqOgzDO7iKvU8vcnwNrmxYbSW9ERBXukOXolLzeO_Jn
   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJhbGciOiJFUzUxMiJ9
     .
     UGF5bG9hZA
     .
     AdwMgeerwtHoh-l192l60hp9wAHZFVJbLfD_UxMi70cwnZOYaRI1bKPWROc-mZZq
     wqT2SI-KGDKB34XO0aw_7XdtAG8GaSwFKdCAPZgoXD2YBJZCPEX3xKpRwcdOO8Kp
     EHwJjyqOgzDO7iKvU8vcnwNrmxYbSW9ERBXukOXolLzeO_Jn

A.4.2.  Validating

   Since the "alg" Header Parameter is "ES512", we validate the ECDSA
   P-521 SHA-512 digital signature contained in the JWS Signature.

   Validating this JWS Signature is very similar to the previous
   example.  We need to split the 132 member 132-member octet sequence of the JWS
   Signature into two 66 octet 66-octet sequences, the first representing R and
   the second S.  We then pass the public key (x, y), the signature (R,
   S), and the JWS Signing Input to an ECDSA signature verifier that has
   been configured to use the P-521 curve with the SHA-512 hash
   function.

A.5.  Example Unsecured JWS

   The following example JWS Protected Header declares that the encoded
   object is an Unsecured JWS:

     {"alg":"none"}

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJub25lIn0

   The JWS Payload used in this example, which follows, is the same as
   in the previous examples.  Since the BASE64URL(JWS Payload) value
   will therefore be the same, its computation is not repeated here.

     {"iss":"joe",
      "exp":1300819380,
      "http://example.com/is_root":true}

   The JWS Signature is the empty octet string and BASE64URL(JWS
   Signature) is the empty string.

   Concatenating these values in the order Header.Payload.Signature with
   period ('.') characters between the parts yields this complete JWS
   representation using the JWS Compact Serialization (with line breaks
   for display purposes only):

     eyJhbGciOiJub25lIn0
     .
     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
     .

A.6.  Example JWS using Using General JWS JSON Serialization

   This section contains an example using the general JWS JSON
   Serialization syntax.  This example demonstrates the capability for
   conveying multiple digital signatures and/or MACs for the same
   payload.

   The JWS Payload used in this example is the same as that used in the
   examples in Appendix A.2 and Appendix A.3 (with line breaks for
   display purposes only):

     eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
     cGxlLmNvbS9pc19yb290Ijp0cnVlfQ

   Two digital signatures are used in this example: the first using
   RSASSA-PKCS-v1_5
   RSASSA-PKCS1-v1_5 SHA-256 and the second using ECDSA P-256 SHA-256.
   For the first, the JWS Protected Header and key are the same as in
   Appendix A.2, resulting in the same JWS Signature value; therefore,
   its computation is not repeated here.  For the second, the JWS
   Protected Header and key are the same as in Appendix A.3, resulting
   in the same JWS Signature value; therefore, its computation is not
   repeated here.

A.6.1.  JWS Per-Signature Protected Headers

   The JWS Protected Header value used for the first signature is:

     {"alg":"RS256"}

   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJSUzI1NiJ9

   The JWS Protected Header value used for the second signature is:

     {"alg":"ES256"}
   Encoding this JWS Protected Header as BASE64URL(UTF8(JWS Protected
   Header)) gives this value:

     eyJhbGciOiJFUzI1NiJ9

A.6.2.  JWS Per-Signature Unprotected Headers

   Key ID values are supplied for both keys using per-signature Header
   Parameters.  The two JWS Unprotected Header values used to represent
   these Key key IDs are:

     {"kid":"2010-12-29"}

   and

     {"kid":"e9bc097a-ce51-4036-9562-d2ade882db0d"}

A.6.3.  Complete JOSE Header Values

   Combining the protected JWS Protected Header and unprotected header JWS Unprotected Header values
   supplied, the JOSE Header values used for the first and second signatures
   respectively
   signatures, respectively, are:

     {"alg":"RS256",
      "kid":"2010-12-29"}

   and

     {"alg":"ES256",
      "kid":"e9bc097a-ce51-4036-9562-d2ade882db0d"}

A.6.4.  Complete JWS JSON Serialization Representation

   The complete JWS JSON Serialization for these values is as follows
   (with line breaks within values for display purposes only):

     {
      "payload":
       "eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGF
        tcGxlLmNvbS9pc19yb290Ijp0cnVlfQ",
      "signatures":[
       {"protected":"eyJhbGciOiJSUzI1NiJ9",
        "header":
         {"kid":"2010-12-29"},
        "signature":
         "cC4hiUPoj9Eetdgtv3hF80EGrhuB__dzERat0XF9g2VtQgr9PJbu3XOiZj5RZ
          mh7AAuHIm4Bh-0Qc_lF5YKt_O8W2Fp5jujGbds9uJdbF9CUAr7t1dnZcAcQjb
          KBYNX4BAynRFdiuB--f_nZLgrnbyTyWzO75vRK5h6xBArLIARNPvkSjtQBMHl
          b1L07Qe7K0GarZRmB_eSN9383LcOLn6_dO--xi12jzDwusC-eOkHWEsqtFZES
          c6BfI7noOPqvhJ1phCnvWh6IeYI2w9QOYEUipUTI8np6LbgGY9Fs98rqVt5AX
          LIhWkWywlVmtVrBp0igcN_IoypGlUPQGe77Rw"},
       {"protected":"eyJhbGciOiJFUzI1NiJ9",
        "header":
         {"kid":"e9bc097a-ce51-4036-9562-d2ade882db0d"},
        "signature":
         "DtEhU3ljbEg8L38VWAfUAqOyKAM6-Xx-F4GawxaepmXFCgfTjDxw5djxLa8IS
          lSApmWQxfKTUJqPP3-Kg6NU1Q"}]
     }

A.7.  Example JWS using Using Flattened JWS JSON Serialization

   This section contains an example using the flattened JWS JSON
   Serialization syntax.  This example demonstrates the capability for
   conveying a single digital signature or MAC in a flattened JSON
   structure.

   The values in this example are the same as those in the second
   signature of the previous example in Appendix A.6.

   The complete JWS JSON Serialization for these values is as follows
   (with line breaks within values for display purposes only):

     {
      "payload":
       "eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGF
        tcGxlLmNvbS9pc19yb290Ijp0cnVlfQ",
      "protected":"eyJhbGciOiJFUzI1NiJ9",
      "header":
       {"kid":"e9bc097a-ce51-4036-9562-d2ade882db0d"},
      "signature":
       "DtEhU3ljbEg8L38VWAfUAqOyKAM6-Xx-F4GawxaepmXFCgfTjDxw5djxLa8IS
        lSApmWQxfKTUJqPP3-Kg6NU1Q"
     }

Appendix B.  "x5c" (X.509 Certificate Chain) Example

   The JSON array below is an example of a certificate chain that could
   be used as the value of an "x5c" (X.509 Certificate Chain) certificate chain) Header
   Parameter, per Section 4.1.6 (with line breaks within values for
   display purposes only):

     ["MIIE3jCCA8agAwIBAgICAwEwDQYJKoZIhvcNAQEFBQAwYzELMAkGA1UEBhMCVVM
       xITAfBgNVBAoTGFRoZSBHbyBEYWRkeSBHcm91cCwgSW5jLjExMC8GA1UECxMoR2
       8gRGFkZHkgQ2xhc3MgMiBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw0wNjExM
       TYwMTU0MzdaFw0yNjExMTYwMTU0MzdaMIHKMQswCQYDVQQGEwJVUzEQMA4GA1UE
       CBMHQXJpem9uYTETMBEGA1UEBxMKU2NvdHRzZGFsZTEaMBgGA1UEChMRR29EYWR
       keS5jb20sIEluYy4xMzAxBgNVBAsTKmh0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYW
       RkeS5jb20vcmVwb3NpdG9yeTEwMC4GA1UEAxMnR28gRGFkZHkgU2VjdXJlIENlc
       nRpZmljYXRpb24gQXV0aG9yaXR5MREwDwYDVQQFEwgwNzk2OTI4NzCCASIwDQYJ
       KoZIhvcNAQEBBQADggEPADCCAQoCggEBAMQt1RWMnCZM7DI161+4WQFapmGBWTt
       wY6vj3D3HKrjJM9N55DrtPDAjhI6zMBS2sofDPZVUBJ7fmd0LJR4h3mUpfjWoqV
       Tr9vcyOdQmVZWt7/v+WIbXnvQAjYwqDL1CBM6nPwT27oDyqu9SoWlm2r4arV3aL
       GbqGmu75RpRSgAvSMeYddi5Kcju+GZtCpyz8/x4fKL4o/K1w/O5epHBp+YlLpyo
       7RJlbmr2EkRTcDCVw5wrWCs9CHRK8r5RsL+H0EwnWGu1NcWdrxcx+AuP7q2BNgW
       JCJjPOq8lh8BJ6qf9Z/dFjpfMFDniNoW1fho3/Rb2cRGadDAW/hOUoz+EDU8CAw
       EAAaOCATIwggEuMB0GA1UdDgQWBBT9rGEyk2xF1uLuhV+auud2mWjM5zAfBgNVH
       SMEGDAWgBTSxLDSkdRMEXGzYcs9of7dqGrU4zASBgNVHRMBAf8ECDAGAQH/AgEA
       MDMGCCsGAQUFBwEBBCcwJTAjBggrBgEFBQcwAYYXaHR0cDovL29jc3AuZ29kYWR
       keS5jb20wRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDovL2NlcnRpZmljYXRlcy5nb2
       RhZGR5LmNvbS9yZXBvc2l0b3J5L2dkcm9vdC5jcmwwSwYDVR0gBEQwQjBABgRVH
       SAAMDgwNgYIKwYBBQUHAgEWKmh0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5j
       b20vcmVwb3NpdG9yeTAOBgNVHQ8BAf8EBAMCAQYwDQYJKoZIhvcNAQEFBQADggE
       BANKGwOy9+aG2Z+5mC6IGOgRQjhVyrEp0lVPLN8tESe8HkGsz2ZbwlFalEzAFPI
       UyIXvJxwqoJKSQ3kbTJSMUA2fCENZvD117esyfxVgqwcSeIaha86ykRvOe5GPLL
       5CkKSkB2XIsKd83ASe8T+5o0yGPwLPk9Qnt0hCqU7S+8MxZC9Y7lhyVJEnfzuz9
       p0iRFEUOOjZv2kWzRaJBydTXRE4+uXR21aITVSzGh6O1mawGhId/dQb8vxRMDsx
       uxN89txJx9OjxUUAiKEngHUuHqDTMBqLdElrRhjZkAzVvb3du6/KFUJheqwNTrZ
       EjYx8WnM25sgVjOuH0aBsXBTWVU+4=",
      "MIIE+zCCBGSgAwIBAgICAQ0wDQYJKoZIhvcNAQEFBQAwgbsxJDAiBgNVBAcTG1Z
       hbGlDZXJ0IFZhbGlkYXRpb24gTmV0d29yazEXMBUGA1UEChMOVmFsaUNlcnQsIE
       luYy4xNTAzBgNVBAsTLFZhbGlDZXJ0IENsYXNzIDIgUG9saWN5IFZhbGlkYXRpb
       24gQXV0aG9yaXR5MSEwHwYDVQQDExhodHRwOi8vd3d3LnZhbGljZXJ0LmNvbS8x
       IDAeBgkqhkiG9w0BCQEWEWluZm9AdmFsaWNlcnQuY29tMB4XDTA0MDYyOTE3MDY
       yMFoXDTI0MDYyOTE3MDYyMFowYzELMAkGA1UEBhMCVVMxITAfBgNVBAoTGFRoZS
       BHbyBEYWRkeSBHcm91cCwgSW5jLjExMC8GA1UECxMoR28gRGFkZHkgQ2xhc3MgM
       iBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCCASAwDQYJKoZIhvcNAQEBBQADggEN
       ADCCAQgCggEBAN6d1+pXGEmhW+vXX0iG6r7d/+TvZxz0ZWizV3GgXne77ZtJ6XC
       APVYYYwhv2vLM0D9/AlQiVBDYsoHUwHU9S3/Hd8M+eKsaA7Ugay9qK7HFiH7Eux
       6wwdhFJ2+qN1j3hybX2C32qRe3H3I2TqYXP2WYktsqbl2i/ojgC95/5Y0V4evLO
       tXiEqITLdiOr18SPaAIBQi2XKVlOARFmR6jYGB0xUGlcmIbYsUfb18aQr4CUWWo
       riMYavx4A6lNf4DD+qta/KFApMoZFv6yyO9ecw3ud72a9nmYvLEHZ6IVDd2gWMZ
       Eewo+YihfukEHU1jPEX44dMX4/7VpkI+EdOqXG68CAQOjggHhMIIB3TAdBgNVHQ
       4EFgQU0sSw0pHUTBFxs2HLPaH+3ahq1OMwgdIGA1UdIwSByjCBx6GBwaSBvjCBu
       zEkMCIGA1UEBxMbVmFsaUNlcnQgVmFsaWRhdGlvbiBOZXR3b3JrMRcwFQYDVQQK
       Ew5WYWxpQ2VydCwgSW5jLjE1MDMGA1UECxMsVmFsaUNlcnQgQ2xhc3MgMiBQb2x
       pY3kgVmFsaWRhdGlvbiBBdXRob3JpdHkxITAfBgNVBAMTGGh0dHA6Ly93d3cudm
       FsaWNlcnQuY29tLzEgMB4GCSqGSIb3DQEJARYRaW5mb0B2YWxpY2VydC5jb22CA
       QEwDwYDVR0TAQH/BAUwAwEB/zAzBggrBgEFBQcBAQQnMCUwIwYIKwYBBQUHMAGG
       F2h0dHA6Ly9vY3NwLmdvZGFkZHkuY29tMEQGA1UdHwQ9MDswOaA3oDWGM2h0dHA
       6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS9yb290LmNybD
       BLBgNVHSAERDBCMEAGBFUdIAAwODA2BggrBgEFBQcCARYqaHR0cDovL2NlcnRpZ
       mljYXRlcy5nb2RhZGR5LmNvbS9yZXBvc2l0b3J5MA4GA1UdDwEB/wQEAwIBBjAN
       BgkqhkiG9w0BAQUFAAOBgQC1QPmnHfbq/qQaQlpE9xXUhUaJwL6e4+PrxeNYiY+
       Sn1eocSxI0YGyeR+sBjUZsE4OWBsUs5iB0QQeyAfJg594RAoYC5jcdnplDQ1tgM
       QLARzLrUc+cb53S8wGd9D0VmsfSxOaFIqII6hR8INMqzW/Rn453HWkrugp++85j
       09VZw==",
      "MIIC5zCCAlACAQEwDQYJKoZIhvcNAQEFBQAwgbsxJDAiBgNVBAcTG1ZhbGlDZXJ
       0IFZhbGlkYXRpb24gTmV0d29yazEXMBUGA1UEChMOVmFsaUNlcnQsIEluYy4xNT
       AzBgNVBAsTLFZhbGlDZXJ0IENsYXNzIDIgUG9saWN5IFZhbGlkYXRpb24gQXV0a
       G9yaXR5MSEwHwYDVQQDExhodHRwOi8vd3d3LnZhbGljZXJ0LmNvbS8xIDAeBgkq
       hkiG9w0BCQEWEWluZm9AdmFsaWNlcnQuY29tMB4XDTk5MDYyNjAwMTk1NFoXDTE
       5MDYyNjAwMTk1NFowgbsxJDAiBgNVBAcTG1ZhbGlDZXJ0IFZhbGlkYXRpb24gTm
       V0d29yazEXMBUGA1UEChMOVmFsaUNlcnQsIEluYy4xNTAzBgNVBAsTLFZhbGlDZ
       XJ0IENsYXNzIDIgUG9saWN5IFZhbGlkYXRpb24gQXV0aG9yaXR5MSEwHwYDVQQD
       ExhodHRwOi8vd3d3LnZhbGljZXJ0LmNvbS8xIDAeBgkqhkiG9w0BCQEWEWluZm9
       AdmFsaWNlcnQuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDOOnHK5a
       vIWZJV16vYdA757tn2VUdZZUcOBVXc65g2PFxTXdMwzzjsvUGJ7SVCCSRrCl6zf
       N1SLUzm1NZ9WlmpZdRJEy0kTRxQb7XBhVQ7/nHk01xC+YDgkRoKWzk2Z/M/VXwb
       P7RfZHM047QSv4dk+NoS/zcnwbNDu+97bi5p9wIDAQABMA0GCSqGSIb3DQEBBQU
       AA4GBADt/UG9vUJSZSWI4OB9L+KXIPqeCgfYrx+jFzug6EILLGACOTb2oWH+heQ
       C1u+mNr0HZDzTuIYEZoDJJKPTEjlbVUjP9UNV+mWwD5MlM/Mtsq2azSiGM5bUMM
       j4QssxsodyamEwCW/POuZ6lcg5Ktz885hZo+L7tdEy8W9ViH0Pd"]

Appendix C.  Notes on implementing Implementing base64url encoding Encoding without padding Padding

   This appendix describes how to implement base64url encoding and
   decoding functions without padding based upon standard base64
   encoding and decoding functions that do use padding.

   To be concrete, example C# code implementing these functions is shown
   below.  Similar code could be used in other languages.

     static string base64urlencode(byte [] arg)
     {
       string s = Convert.ToBase64String(arg); // Regular base64 encoder
       s = s.Split('=')[0]; // Remove any trailing '='s
       s = s.Replace('+', '-'); // 62nd char of encoding
       s = s.Replace('/', '_'); // 63rd char of encoding
       return s;
     }

     static byte [] base64urldecode(string arg)
     {
       string s = arg;
       s = s.Replace('-', '+'); // 62nd char of encoding
       s = s.Replace('_', '/'); // 63rd char of encoding
       switch (s.Length % 4) // Pad with trailing '='s
       {
         case 0: break; // No pad chars in this case
         case 2: s += "=="; break; // Two pad chars
         case 3: s += "="; break; // One pad char
         default: throw new System.Exception(
           "Illegal base64url string!");
       }
       return Convert.FromBase64String(s); // Standard base64 decoder
     }

   As per the example code above, the number of '=' padding characters
   that needs to be added to the end of a base64url encoded base64url-encoded string
   without padding to turn it into one with padding is a deterministic
   function of the length of the encoded string.  Specifically, if the
   length mod 4 is 0, no padding is added; if the length mod 4 is 2, two
   '=' padding characters are added; if the length mod 4 is 3, one '='
   padding character is added; if the length mod 4 is 1, the input is
   malformed.

   An example correspondence between unencoded and encoded values
   follows.  The octet sequence below encodes into the string below,
   which when decoded, reproduces the octet sequence.

   3 236 255 224 193
   A-z_4ME

Appendix D.  Notes on Key Selection

   This appendix describes a set of possible algorithms for selecting
   the key to be used to validate the digital signature or MAC of a JWS
   or for selecting the key to be used to decrypt a JWE.  This guidance
   describes a family of possible algorithms, algorithms rather than a single
   algorithm, because in different contexts, not all the sources of keys
   will be used, they can be tried in different orders, and sometimes
   not all the collected keys will be tried; hence, different algorithms
   will be used in different application contexts.

   The steps below are described for illustration purposes only;
   specific applications can and are likely to use different algorithms
   or perform some of the steps in different orders.  Specific
   applications will frequently have a much simpler method of
   determining the keys to use, as there may be one or two key selection
   methods that are profiled for the application's use.  This appendix
   supplements the normative information on key location in Section 6.

   These algorithms include the following steps.  Note that the steps
   can be performed in any order and do not need to be treated as
   distinct.  For example, keys can be tried as soon as they are found,
   rather than collecting all the keys before trying any.

   1.  Collect the set of potentially applicable keys.  Sources of keys
       may include:

       *  Keys supplied by the application protocol being used.

       *  Keys referenced by the "jku" (JWK Set URL) Header Parameter.

       *  The key provided by the "jwk" (JSON Web Key) Header Parameter.

       *  The key referenced by the "x5u" (X.509 URL) Header Parameter.

       *  The key provided by the "x5c" (X.509 Certificate Chain) certificate chain) Header
          Parameter.

       *  Other applicable keys available to the application.

       The order for collecting and trying keys from different key
       sources is typically application dependent.  For example,
       frequently
       frequently, all keys from a one set of locations, such as local
       caches, will be tried before collecting and trying keys from
       other locations.

   2.  Filter the set of collected keys.  For instance, some
       applications will use only keys referenced by "kid" (key ID) or
       "x5t" (X.509 certificate SHA-1 thumbprint) parameters.  If the
       application uses the JWK "alg" (algorithm), "use" (public key
       use), or "key_ops" (key operations) parameters, keys with keys with
       inappropriate values of those parameters would be excluded.
       Additionally, keys might be filtered to include or exclude keys
       with certain other member values in an application specific application-specific
       manner.  For some applications, no filtering will be applied.

   3.  Order the set of collected keys.  For instance, keys referenced
       by "kid" (Key (key ID) or "x5t" (X.509 Certificate certificate SHA-1 Thumbprint) thumbprint)
       parameters might be tried before keys with neither of these
       values.  Likewise, keys with certain member values might be
       ordered before keys with other member values.  For some
       applications, no ordering will be applied.

   4.  Make trust decisions about the keys.  Signatures made with keys
       not meeting the application's trust criteria would not be
       accepted.  Such criteria might include, but is not limited to to,
       the source of the key, whether the TLS certificate validates for
       keys retrieved from URLs, whether a key in an X.509 certificate
       is backed by a valid certificate chain, and other information
       known by the application.

   5.  Attempt signature or MAC validation for a JWS or decryption of a
       JWE with some or all of the collected and possibly filtered
       and/or and/
       or ordered keys.  A limit on the number of keys to be tried might
       be applied.  This process will normally terminate following a
       successful validation or decryption.

   Note that it is reasonable for some applications to perform signature
   or MAC validation prior to making a trust decision about a key, since
   keys for which the validation fails need no trust decision.

Appendix E.  Negative Test Case for "crit" Header Parameter

   Conforming implementations must reject input containing critical
   extensions that are not understood or cannot be processed.  The
   following JWS must be rejected by all implementations, because it
   uses an extension Header Parameter name
   "http://example.invalid/UNDEFINED" "http://example.invalid/
   UNDEFINED" that they do not understand.  Any other similar input, in
   which the use of the value "http://example.invalid/UNDEFINED" is
   substituted for any other Header Parameter name not understood by the
   implementation, must also be rejected.

   The JWS Protected Header value for this JWS is:

     {"alg":"none",
      "crit":["http://example.invalid/UNDEFINED"],
      "http://example.invalid/UNDEFINED":true
     }

   The complete JWS that must be rejected is as follows (with line
   breaks for display purposes only):

     eyJhbGciOiJub25lIiwNCiAiY3JpdCI6WyJodHRwOi8vZXhhbXBsZS5jb20vVU5ERU
     ZJTkVEIl0sDQogImh0dHA6Ly9leGFtcGxlLmNvbS9VTkRFRklORUQiOnRydWUNCn0.
     RkFJTA.

Appendix F.  Detached Content

   In some contexts, it is useful integrity protect to integrity-protect content that is
   not itself contained in a JWS.  One way to do this is to create a JWS
   in the normal fashion using a representation of the content as the payload,
   payload but then delete the payload representation from the JWS, JWS and
   send this modified object to the recipient, recipient rather than the JWS.  When
   using the JWS Compact Serialization, the deletion is accomplished by
   replacing the second field (which contains BASE64URL(JWS Payload))
   value with the empty string; when using the JWS JSON Serialization,
   the deletion is accomplished by deleting the "payload" member.  This
   method assumes that the recipient can reconstruct the exact payload
   used in the JWS.  To use the modified object, the recipient
   reconstructs the JWS by re-inserting the payload representation into
   the modified object, object and uses the resulting JWS in the usual manner.
   Note that this method needs no support from JWS libraries, as
   applications can use this method by modifying the inputs and outputs
   of standard JWS libraries.

Appendix G.

Acknowledgements

   Solutions for signing JSON content were previously explored by Magic
   Signatures [MagicSignatures], JSON Simple Sign [JSS], and Canvas
   Applications [CanvasApp], all of which influenced this draft. document.

   Thanks to Axel Nennker for his early implementation and feedback on
   the JWS and JWE specifications.

   This specification is the work of the JOSE Working Group, working group, which
   includes dozens of active and dedicated participants.  In particular,
   the following individuals contributed ideas, feedback, and wording
   that influenced this specification:

   Dirk Balfanz, Richard Barnes, Brian Campbell, Alissa Cooper, Breno de
   Medeiros, Stephen Farrell, Yaron Y. Goland, Dick Hardt, Joe
   Hildebrand, Jeff Hodges, Russ Housley, Edmund Jay, Tero Kivinen, Yaron Y. Goland, Ben
   Laurie, Ted Lemon, James Manger, Matt Miller, Kathleen Moriarty, Tony
   Nadalin, Hideki Nara, Axel Nennker, John Panzer, Ray Polk, Emmanuel
   Raviart, Eric Rescorla, Pete Resnick, Jim Schaad, Paul Tarjan, Hannes
   Tschofenig, and Sean Turner.

   Jim Schaad and Karen O'Donoghue chaired the JOSE working group and
   Sean Turner, Stephen Farrell, and Kathleen Moriarty served as
   Security area directors Area Directors during the creation of this specification.

Appendix H.  Document History

   [[ to be removed by the RFC Editor before publication as an RFC ]]

   -41

   o  Changed more instances of "reject" to "consider to be invalid".

   o  Simplified the wording of a Message Signature or MAC Computation
      step.

   -40

   o  Clarified the definitions of UTF8(STRING) and ASCII(STRING).

   o  Stated that line breaks are for display purposes only in places
      where this disclaimer was needed and missing.

   -39

   o  Updated the reference to draft-ietf-uta-tls-bcp.

   -38

   o  Replaced uses of the phrases "JWS object" and "JWE object" with
      "JWS" and "JWE".

   o  Added member names to the JWS JSON Serialization Overview.

   o  Applied other minor editorial improvements.

   -37

   o  Updated the TLS requirements language to only require
      implementations to support TLS when they support features using
      TLS.

   o  Updated the language about integrity protecting Header Parameters
      when used in a trust decision.

   o  Restricted algorithm names to using only ASCII characters.

   o  When describing actions taken as a result of validation failures,
      changed statements about rejecting the JWS to statements about
      considering the JWS to be invalid.

   o  Added the CRT parameter values to example RSA private key
      representations.

   o  Updated the example IANA registration request subject line.

   -36

   o  Defined a flattened JWS JSON Serialization syntax, which is
      optimized for the single digital signature or MAC case.

   o  Clarified where white space and line breaks may occur in JSON
      objects by referencing Section 2 of RFC 7159.

   o  Specified that registration reviews occur on the
      jose-reg-review@ietf.org mailing list.

   -35

   o  Addressed AppsDir reviews by Ray Polk.

   o  Used real values for examples in the IANA Registration Template.

   -34

   o  Addressed IESG review comments by Alissa Cooper, Pete Resnick,
      Richard Barnes, Ted Lemon, and Stephen Farrell.

   o  Addressed Gen-ART review comments by Russ Housley.

   o  Referenced RFC 4945 for PEM certificate delimiter syntax.

   -33

   o  Noted that certificate thumbprints are also sometimes known as
      certificate fingerprints.

   o  Added an informative reference to draft-ietf-uta-tls-bcp for
      recommendations on improving the security of software and services
      using TLS.

   o  Changed the registration review period to three weeks.

   o  Acknowledged additional contributors.

   -32

   o  Addressed Gen-ART review comments by Russ Housley.

   o  Addressed secdir review comments by Tero Kivinen, Stephen Kent,
      and Scott Kelly.

   o  Replaced the term Plaintext JWS with Unsecured JWS.

   -31

   o  Reworded the language about JWS implementations ignoring the "typ"
      and "cty" parameters, explicitly saying that their processing is
      performed by JWS applications.

   o  Added additional guidance on ciphersuites currently considered to
      be appropriate for use, including a reference to a recent update
      by the TLS working group.

   -30

   o  Added subsection headings within the Overview section for the two
      serializations.

   o  Added references and cleaned up the reference syntax in a few
      places.

   o  Applied minor wording changes to the Security Considerations
      section and made other local editorial improvements.

   -29

   o  Replaced the terms JWS Header, JWE Header, and JWT Header with a
      single JOSE Header term defined in the JWS specification.  This
      also enabled a single Header Parameter definition to be used and
      reduced other areas of duplication between specifications.

   -28
   o  Revised the introduction to the Security Considerations section.
      Also introduced additional subsection headings for security
      considerations items and also moved a security consideration item
      here from the JWA draft.

   o  Added text about when applications typically would and would not
      use "typ" and "cty" header parameters.

   -27

   o  Added the "x5t#S256" (X.509 Certificate SHA-256 Thumbprint) header
      parameter.

   o  Stated that any JSON inputs not conforming to the JSON-text syntax
      defined in RFC 7159 input MUST be rejected in their entirety.

   o  Simplified the TLS requirements.

   -26

   o  Referenced Section 6 of RFC 6125 for TLS server certificate
      identity validation.

   o  Described potential sources of ambiguity in representing the JSON
      objects used in the examples.  The octets of the actual UTF-8
      representations of the JSON objects used in the examples are
      included to remove these ambiguities.

   o  Added a small amount of additional explanatory text to the
      signature validation examples to aid implementers.

   o  Noted that octet sequences are depicted using JSON array notation.

   o  Updated references, including to W3C specifications.

   -25

   o  No changes were made, other than to the version number and date.

   -24

   o  Updated the JSON reference to RFC 7159.

   -23

   o  Clarified that the base64url encoding includes no line breaks,
      white space, or other additional characters.

   -22

   o  Corrected RFC 2119 terminology usage.

   o  Replaced references to draft-ietf-json-rfc4627bis with RFC 7158.

   -21

   o  Applied review comments to the appendix "Notes on Key Selection",
      addressing issue #93.

   o  Changed some references from being normative to informative,
      addressing issue #90.

   o  Applied review comments to the JSON Serialization section,
      addressing issue #121.

   -20

   o  Made terminology definitions more consistent, addressing issue
      #165.

   o  Restructured the JSON Serialization section to call out the
      parameters used in hanging lists, addressing issue #121.

   o  Described key filtering and refined other aspects of the text in
      the appendix "Notes on Key Selection", addressing issue #93.

   o  Replaced references to RFC 4627 with draft-ietf-json-rfc4627bis,
      addressing issue #90.

   -19

   o  Added the appendix "Notes on Validation Key Selection", addressing
      issue #93.

   o  Reordered the key selection parameters.

   -18

   o  Updated the mandatory-to-implement (MTI) language to say that
      applications using this specification need to specify what
      serialization and serialization features are used for that
      application, addressing issue #119.

   o  Changes to address editorial and minor issues #25, #89, #97, #110,
      #114, #115, #116, #117, #120, and #184.

   o  Added and used Header Parameter Description registry field.

   -17

   o  Refined the "typ" and "cty" definitions to always be MIME Media
      Types, with the omission of "application/" prefixes recommended
      for brevity, addressing issue #50.

   o  Updated the mandatory-to-implement (MTI) language to say that
      general-purpose implementations must implement the single
      signature/MAC value case for both serializations whereas special-
      purpose implementations can implement just one serialization if
      that meets the needs of the use cases the implementation is
      designed for, addressing issue #119.

   o  Explicitly named all the logical components of a JWS and defined
      the processing rules and serializations in terms of those
      components, addressing issues #60, #61, and #62.

   o  Replaced verbose repetitive phases such as "base64url encode the
      octets of the UTF-8 representation of X" with mathematical
      notation such as "BASE64URL(UTF8(X))".

   o  Terms used in multiple documents are now defined in one place and
      incorporated by reference.  Some lightly used or obvious terms
      were also removed.  This addresses issue #58.

   -16

   o  Changes to address editorial and minor issues #50, #98, #99, #102,
      #104, #106, #107, #111, and #112.

   -15

   o  Clarified that it is an application decision which signatures,
      MACs, or plaintext values must successfully validate for the JWS
      to be accepted, addressing issue #35.

   o  Corrected editorial error in "ES512" example.

   o  Changes to address editorial and minor issues #34, #96, #100,
      #101, #104, #105, and #106.

   -14

   o  Stated that the "signature" parameter is to be omitted in the JWS
      JSON Serialization when its value would be empty (which is only
      the case for a Plaintext JWS).

   -13

   o  Made all header parameter values be per-signature/MAC, addressing
      issue #24.

   -12

   o  Clarified that the "typ" and "cty" header parameters are used in
      an application-specific manner and have no effect upon the JWS
      processing.

   o  Replaced the MIME types "application/jws+json" and
      "application/jws" with "application/jose+json" and
      "application/jose".

   o  Stated that recipients MUST either reject JWSs with duplicate
      Header Parameter Names or use a JSON parser that returns only the
      lexically last duplicate member name.

   o  Added a Serializations section with parallel treatment of the JWS
      Compact Serialization and the JWS JSON Serialization and also
      moved the former Implementation Considerations content there.

   -11

   o  Added Key Identification section.

   o  For the JWS JSON Serialization, enable header parameter values to
      be specified in any of three parameters: the "protected" member
      that is integrity protected and shared among all recipients, the
      "unprotected" member that is not integrity protected and shared
      among all recipients, and the "header" member that is not
      integrity protected and specific to a particular recipient.  (This
      does not affect the JWS Compact Serialization, in which all header
      parameter values are in a single integrity protected JWE Header
      value.)

   o  Removed suggested compact serialization for multiple digital
      signatures and/or MACs.

   o  Changed the MIME type name "application/jws-js" to
      "application/jws+json", addressing issue #22.

   o  Tightened the description of the "crit" (critical) header
      parameter.

   o  Added a negative test case for the "crit" header parameter
   -10

   o  Added an appendix suggesting a possible compact serialization for
      JWSs with multiple digital signatures and/or MACs.

   -09

   o  Added JWS JSON Serialization, as specified by
      draft-jones-jose-jws-json-serialization-04.

   o  Registered "application/jws-js" MIME type and "JWS-JS" typ header
      parameter value.

   o  Defined that the default action for header parameters that are not
      understood is to ignore them unless specifically designated as
      "MUST be understood" or included in the new "crit" (critical)
      header parameter list.  This addressed issue #6.

   o  Changed term "JWS Secured Input" to "JWS Signing Input".

   o  Changed from using the term "byte" to "octet" when referring to 8
      bit values.

   o  Changed member name from "recipients" to "signatures" in the JWS
      JSON Serialization.

   o  Added complete values using the JWS Compact Serialization for all
      examples.

   -08

   o  Applied editorial improvements suggested by Jeff Hodges and Hannes
      Tschofenig.  Many of these simplified the terminology used.

   o  Clarified statements of the form "This header parameter is
      OPTIONAL" to "Use of this header parameter is OPTIONAL".

   o  Added a Header Parameter Usage Location(s) field to the IANA JSON
      Web Signature and Encryption Header Parameters registry.

   o  Added seriesInfo information to Internet Draft references.

   -07

   o  Updated references.

   -06
   o  Changed "x5c" (X.509 Certificate Chain) representation from being
      a single string to being an array of strings, each containing a
      single base64 encoded DER certificate value, representing elements
      of the certificate chain.

   o  Applied changes made by the RFC Editor to RFC 6749's registry
      language to this specification.

   -05

   o  Added statement that "StringOrURI values are compared as case-
      sensitive strings with no transformations or canonicalizations
      applied".

   o  Indented artwork elements to better distinguish them from the body
      text.

   -04

   o  Completed JSON Security Considerations section, including
      considerations about rejecting input with duplicate member names.

   o  Completed security considerations on the use of a SHA-1 hash when
      computing "x5t" (x.509 certificate thumbprint) values.

   o  Refer to the registries as the primary sources of defined values
      and then secondarily reference the sections defining the initial
      contents of the registries.

   o  Normatively reference XML DSIG 2.0 for its security
      considerations.

   o  Added this language to Registration Templates: "This name is case
      sensitive.  Names that match other registered names in a case
      insensitive manner SHOULD NOT be accepted."

   o  Reference draft-jones-jose-jws-json-serialization instead of
      draft-jones-json-web-signature-json-serialization.

   o  Described additional open issues.

   o  Applied editorial suggestions.

   -03

   o  Added the "cty" (content type) header parameter for declaring type
      information about the secured content, as opposed to the "typ"
      (type) header parameter, which declares type information about
      this object.

   o  Added "Collision Resistant Namespace" to the terminology section.

   o  Reference ITU.X690.1994 for DER encoding.

   o  Added an example JWS using ECDSA P-521 SHA-512.  This has
      particular illustrative value because of the use of the 521 bit
      integers in the key and signature values.  This is also an example
      in which the payload is not a base64url encoded JSON object.

   o  Added an example "x5c" value.

   o  No longer say "the UTF-8 representation of the JWS Secured Input
      (which is the same as the ASCII representation)".  Just call it
      "the ASCII representation of the JWS Secured Input".

   o  Added Registration Template sections for defined registries.

   o  Added Registry Contents sections to populate registry values.

   o  Changed name of the JSON Web Signature and Encryption "typ" Values
      registry to be the JSON Web Signature and Encryption Type Values
      registry, since it is used for more than just values of the "typ"
      parameter.

   o  Moved registries JSON Web Signature and Encryption Header
      Parameters and JSON Web Signature and Encryption Type Values to
      the JWS specification.

   o  Numerous editorial improvements.

   -02

   o  Clarified that it is an error when a "kid" value is included and
      no matching key is found.

   o  Removed assumption that "kid" (key ID) can only refer to an
      asymmetric key.

   o  Clarified that JWSs with duplicate Header Parameter Names MUST be
      rejected.

   o  Clarified the relationship between "typ" header parameter values
      and MIME types.

   o  Registered application/jws MIME type and "JWS" typ header
      parameter value.

   o  Simplified JWK terminology to get replace the "JWK Key Object" and
      "JWK Container Object" terms with simply "JSON Web Key (JWK)" and
      "JSON Web Key Set (JWK Set)" and to eliminate potential confusion
      between single keys and sets of keys.  As part of this change, the
      Header Parameter Name for a public key value was changed from
      "jpk" (JSON Public Key) to "jwk" (JSON Web Key).

   o  Added suggestion on defining additional header parameters such as
      "x5t#S256" in the future for certificate thumbprints using hash
      algorithms other than SHA-1.

   o  Specify RFC 2818 server identity validation, rather than RFC 6125
      (paralleling the same decision in the OAuth specs).

   o  Generalized language to refer to Message Authentication Codes
      (MACs) rather than Hash-based Message Authentication Codes (HMACs)
      unless in a context specific to HMAC algorithms.

   o  Reformatted to give each header parameter its own section heading.

   -01

   o  Moved definition of Plaintext JWSs (using "alg":"none") here from
      the JWT specification since this functionality is likely to be
      useful in more contexts that just for JWTs.

   o  Added "jpk" and "x5c" header parameters for including JWK public
      keys and X.509 certificate chains directly in the header.

   o  Clarified that this specification is defining the JWS Compact
      Serialization.  Referenced the new JWS-JS spec, which defines the
      JWS JSON Serialization.

   o  Added text "New header parameters should be introduced sparingly
      since an implementation that does not understand a parameter MUST
      reject the JWS".

   o  Clarified that the order of the creation and validation steps is
      not significant in cases where there are no dependencies between
      the inputs and outputs of the steps.

   o  Changed "no canonicalization is performed" to "no canonicalization
      need be performed".

   o  Corrected the Magic Signatures reference.

   o  Made other editorial improvements suggested by JOSE working group
      participants.

   -00

   o  Created the initial IETF draft based upon
      draft-jones-json-web-signature-04 with no normative changes.

   o  Changed terminology to no longer call both digital signatures and
      HMACs "signatures".

Authors' Addresses

   Michael B. Jones
   Microsoft

   Email:

   EMail: mbj@microsoft.com
   URI:   http://self-issued.info/

   John Bradley
   Ping Identity

   Email:

   EMail: ve7jtb@ve7jtb.com
   URI:   http://www.thread-safe.com/

   Nat Sakimura
   Nomura Research Institute

   Email:

   EMail: n-sakimura@nri.co.jp
   URI:   http://nat.sakimura.org/