The package semptools (CRAN page)
contains functions that *post-process* an output from
`semPlot::semPaths()`

, to help users to customize the
appearance of the graphs generated by `semPlot::semPaths()`

.
For the introduction to functions for doing very specific tasks, such as
moving the parameter estimate of a path or rotating the residual of a
variable, please refer to `vignette("semptools")`

. The
present guide focuses on how to use `set_sem_layout()`

to
configure various aspects of a `semPaths`

graph generated for
a typical structural equation model (SEM) with latent factors. For
configuring the layout of a confirmatory factor analysis (CFA) model
with no structural path between factors, please refer to the
`vignette("quick_start_cfa")`

.

`semPaths`

GraphLet us consider an SEM model. We will use `sem_example`

, a
sample CFA dataset from semptools with 14 variables for
illustration.

```
library(semptools)
head(round(sem_example, 3), 3)
#> x01 x02 x03 x04 x05 x06 x07 x08 x09 x10 x11
#> 1 2.861 2.289 3.381 0.191 0.095 -0.395 -0.060 1.320 2.807 2.330 2.069
#> 2 -0.246 -1.299 -0.371 2.232 -0.419 -0.565 -0.162 3.050 1.513 1.777 2.991
#> 3 0.079 0.067 0.323 -3.043 -1.093 -0.626 -1.961 -4.908 -2.048 -3.190 1.403
#> x12 x13 x14
#> 1 0.569 -0.808 1.989
#> 2 2.125 0.767 1.539
#> 3 1.888 1.356 1.107
```

This is the SEM model to be fitted:

```
mod <-
'f1 =~ x01 + x02 + x03
f2 =~ x04 + x05 + x06 + x07
f3 =~ x08 + x09 + x10
f4 =~ x11 + x12 + x13 + x14
f3 ~ f1 + f2
f4 ~ f1 + f3
'
```

Fitting the model using `lavaan::sem()`

:

This is the plot from `semPaths`

:

```
library(semPlot)
p <- semPaths(fit, whatLabels="est",
sizeMan = 5,
node.width = 1,
edge.label.cex = .75,
style = "ram",
mar = c(5, 5, 5, 5))
```

We will see how `set_sem_layout()`

can be used to do the
following tasks to *post-process* the graph:

Change the order of the indicators.

Assign factors to indicators manually.

Specify how to set the approximate positions of the factors.

Specify how to place the indicators of a factor.

Adjust the placement of the indicators relative to their corresponding factors.

Move the loadings along the paths from factors to indicators.

This section describes how to set the order of the indicators, assign them to factors, and specify the approximate positions of the factors.

Suppose we want to do this:

We would like to assign the indicators to the factors this way:

`x04`

,`x05`

,`x06`

, and`x07`

for`f2`

.`x01`

,`x02`

, and`x03`

for`f1`

.`x11`

,`x12`

,`x13`

, and`x14`

for`f4`

.`x08`

,`x09`

, and`x10`

for`f3`

.

To do this, we create two vectors, one for the argument
`indicator_order`

and the other for the argument
`indicator_factor`

.

`indicator_order`

is a string vector with length equal to the number of indicators, with the desired order if the indicators are placed*above*the corresponding factors. In this example, it will be like this:

```
indicator_order <- c("x04", "x05", "x06", "x07",
"x01", "x02", "x03",
"x11", "x12", "x13", "x14",
"x08", "x09", "x10")
```

`indicator_factor`

is a string vector with length equal to the number of indicators. The elements are the names of the latent factors, denoting which factor each indicator will be assigned to:

```
indicator_factor <- c( "f2", "f2", "f2", "f2",
"f1", "f1", "f1",
"f4", "f4", "f4", "f4",
"f3", "f3", "f3")
```

To specify the locations of the factors, we need two more arguments,
`factor_layout`

and `factor_point_to`

.

`factor_layout`

is a matrix of arbitrary size, with either
`NA`

or the name of a factor. For example:

This sets up a 3-by-3 grid, with `f1`

on the top left,
`f2`

on the bottom left, `f3`

in the center, and
`f4`

on the right of `f3`

. Each factor must be in
one and only one cell of this matrix.

Note that a column or row can contain only `NA`

, to
increase the vertical or horizontal distance between factors.

The helper function `layout_matrix()`

can also be used to
create the matrix to be used in `factor_layout`

(see
`vignette("layout_matrix")`

on how to use
`layout_matrix()`

):

```
factor_layout <- layout_matrix(f1 = c(1, 1),
f2 = c(3, 1),
f3 = c(2, 2),
f4 = c(2, 3))
factor_layout
#> [,1] [,2] [,3]
#> [1,] "f1" NA NA
#> [2,] NA "f3" "f4"
#> [3,] "f2" NA NA
```

`factor_point_to`

is a matrix of the size as
`factor_layout`

, with either `NA`

or one of these:
“down”, “left”, “up”, or “right”, to indicate the direction that a
factor “points to” its indicator. For example:

```
factor_point_to <- matrix(c("left", NA, NA,
NA, "down", "down",
"left", NA, NA), byrow = TRUE, 3, 3)
```

`f1`

and `f2`

will point to the left (i.e.,
indicators on the left), `f3`

and `f4`

will point
downwards.

`layout_matrix()`

can also be used to create this
matrix:

```
factor_point_to <- layout_matrix(left = c(1, 1),
left = c(3, 1),
down = c(2, 2),
down = c(2, 3))
factor_point_to
#> [,1] [,2] [,3]
#> [1,] "left" NA NA
#> [2,] NA "down" "down"
#> [3,] "left" NA NA
```

In sum, the `set_sem_layout()`

function needs at least
these arguments:

`semPaths_plot`

: The`semPaths`

plot.`indicator_order`

: The vector for the order of indicators.`indicator_factor`

: The vector for assigning indicators to latent factors.`factor_layout`

: The position of the factors on a grid.`factor_point_to`

: The placement of the indicators.

They do not have to be named if they are in this order.

We now use `set_sem_layout()`

to post-process the
graph:

The placement of the indicators are too close to the indicators and to neighboring indicators. We can adjust the relative position in two ways.

We can use the argument `indicator_push`

to push the
indicators of a factor away from it. The argument needs a named vector.
The name is the factor of which the indictors will be “pushed”, and the
value is how “hard” the push is: the multiplier to the distance from the
factor to the indicators. For example:

This vector will double the distance between the indicators of
`f3`

and their factors, and multiply the distance between the
indicators of `f4`

, `f1`

, and `f2`

and
their factors by 1.5. If `push`

is less than 1, the
indicators will be “pulled” towards their factors.

We can use the argument `indicator_spread`

to spread out
the indicators of a factor, increasing the distance between the
indicators. The argument needs a named vector. The name is the factor of
which the indicators will be spread out. The value is the multiplier to
the distance between neighboring indicators. For example:

This vector will double the distance between the indicators of
`f1`

, and multiply the distance between the indicators of
`f2`

and `f4`

. and its indicators by 1.5. If
`spread`

is less than 1, the indicators will be squeezed
towards each others.

We can move the loadings of indicators along the paths by the
argument `loading_position`

. If we supply one single number,
from 0 to 1, this number will be used for the position of all loadings.
A value of .5 place the loadings on the middle of the paths. Larger the
value, closer the loadings to the indicators. Smaller the value, closer
the loadings to the factors.

We can also use a named vector to specify the positions of indicators for each factor.In each element, the name if the factor whose loadings will be moved. The value is the positions of its loadings. The default is .50. We only need to specify the positions for factors to be changed from .50 to other values. For example:

Like other functions in `semptools`

, the
`set_sem_layout()`

function can be chained with other
functions using the pipe operator, `%>%`

, from the package
`magrittr`

, or the native pipe operator `|>`

available since R 4.1.x. Suppose we want to mark the significant test
results for the free parameters using `mark_sig()`

, and use
`set_curve()`

to change the curvature of
`f1 ~~ f2`

covariances and `f4 ~ f1`

paths (we
push and spread some indicators to make room for the asterisks, and
change the orientation of `f4`

to `up`

):

```
# If R version >= 4.1.0
p2 <- set_sem_layout(p,
indicator_order = indicator_order,
indicator_factor = indicator_factor,
factor_layout = factor_layout,
factor_point_to = factor_point_to,
indicator_push = indicator_push,
indicator_spread = indicator_spread,
loading_position = loading_position) |>
set_curve(c("f2 ~~ f1" = -1,
"f4 ~ f1" = 1.5)) |>
mark_sig(fit)
plot(p2)
```

- Currently, if a function needs the SEM output, only lavaan output is supported.