Package GLMMadaptive provides a suit of functions for fitting and post-processing mixed effects models for grouped/clustered outcomes which have a distribution other than a normal distribution. In particular, let \(y_i\) denote a vector of grouped/clustered outcome for the \(i\)-th sample unit (\(i = 1, \ldots, n\)). The conditional distribution of \(y_i\) given a vector of random effects \(b_i\) is assumed to be a member of the extended exponential family, with linear predictor given by \[g\{E(y_i \mid b_i)\} = X_i \beta + Z_i b_i,\] where \(g(\cdot)\) denotes a monotonic link function, \(X_i\) a design matrix for the fixed effects coefficients \(\beta\), and \(Z_i\) a design matrix for the random effects coefficients \(b_i\). Typically, matrix \(Z_i\) is assumed to be a subset of \(X_i\). The random effects are assumed to follow a normal distribution with mean 0 and variance-covariance matrix \(D\). In addition, the distribution \([y_i \mid b_i]\) may potentially have extra dispersion/shape parameters \(\phi\).
The package focuses in settings in which the distribution \([y_i \mid b_i]\) is not normal and/or the link function \(g(\cdot)\) is not the identity. In these settings, the estimation of the model is complicated by the fact that the marginal log-likelihood function of the observed \(y_i\) cannot be derived analytically. In particular, the log-likelihood function has the form: \[\begin{eqnarray*} \ell(\theta) & = & \sum_{i = 1}^n \log p(y_i; \theta)\\ & = & \sum_{i = 1}^n \log \int p(y_i \mid b_i; \theta) \, p(b_i; \theta) \, db_i, \end{eqnarray*}\] where \(\theta\) denotes the full parameter vector including the fixed effects, the extra potential dispersion/shape parameters \(\phi\) and the unique element of the covariance matrix \(D\), and \(p(\cdot)\) denotes a probability density or probability mass function. The integral in the definition of \(\ell(\theta)\) does not have a closed-form solution, and numerical approximations are required to obtain the maximum likelihood estimates.
In the literature several approaches have been proposed to approximate such integrals, and a nice overview is given in Pinheiro and Chao (2006). A typical approach to approximate these integrals is the Laplace approximation. However, the general consensus has been that in the standard but difficult cases of binary/dichotomous data and count data with small counts and few repeated measurements, the accuracy of this approximation is rather low. Due to this fact, the general consensus is that the gold standard numerical approximation method is the adaptive Gaussian quadrature rule (note: we focus here on maximum likelihood estimation; under the Bayesian paradigm, approaches, such as, MCMC and Hamiltonian Monte Carlo also provide accurate evaluation of the integrals). This is more computationally intensive but also more accurate. This package provides an efficient implementation of the adaptive Gaussian quadrature rule, allowing for multiple correlated random effects (e.g., random intercepts, linear and quadratic random slopes) but currently a single grouping factor (i.e., no nested or crossed random effects designs).
A hybrid optimization procedure is implemented starting with an EM algorithm, treating the random effects as ‘missing data’, followed by a direct optimization procedure with a quasi-Newton algorithm. Fine control of this procedure is allowed with a series of control arguments.
We illustrate the use of the package in the standard case of a mixed effects logistic regression. That is, the distribution of \([y_i \mid b_i]\) is binomial, and the distribution of \([b_i]\) multivariate normal.
We start by simulating some data for a binary longitudinal outcome:
set.seed(1234)
n <- 100 # number of subjects
K <- 8 # number of measurements per subject
t_max <- 15 # maximum follow-up time
# we construct a data frame with the design:
# everyone has a baseline measurement, and then measurements at random follow-up times
DF <- data.frame(id = rep(seq_len(n), each = K),
time = c(replicate(n, c(0, sort(runif(K - 1, 0, t_max))))),
sex = rep(gl(2, n/2, labels = c("male", "female")), each = K))
# design matrices for the fixed and random effects
X <- model.matrix(~ sex * time, data = DF)
Z <- model.matrix(~ time, data = DF)
betas <- c(-2.13, -0.25, 0.24, -0.05) # fixed effects coefficients
D11 <- 0.48 # variance of random intercepts
D22 <- 0.1 # variance of random slopes
# we simulate random effects
b <- cbind(rnorm(n, sd = sqrt(D11)), rnorm(n, sd = sqrt(D22)))
# linear predictor
eta_y <- drop(X %*% betas + rowSums(Z * b[DF$id, ]))
# we simulate binary longitudinal data
DF$y <- rbinom(n * K, 1, plogis(eta_y))We fit a mixed effects logistic regression for y,
assuming random intercepts for the random-effects part. The basic
model-fitting function in GLMMadaptive is called
mixed_model(), and has four required arguments, namely
fixed a formula for the fixed effects, random
a formula for the random effects, family a family object
specifying the type of response variable, and data a data
frame containing the variables in the previously mentioned formulas.
Hence, the call to fit the random intercepts logistic regression is:
The summary method gives a detailed output of the model:
summary(fm1)
#>
#> Call:
#> mixed_model(fixed = y ~ sex * time, random = ~1 | id, data = DF,
#> family = binomial())
#>
#> Data Descriptives:
#> Number of Observations: 800
#> Number of Groups: 100
#>
#> Model:
#> family: binomial
#> link: logit
#>
#> Fit statistics:
#> log.Lik AIC BIC
#> -374.5197 759.0394 772.0653
#>
#> Random effects covariance matrix:
#> StdDev
#> (Intercept) 2.064622
#>
#> Fixed effects:
#> Estimate Std.Err z-value p-value
#> (Intercept) -2.6182 0.4448 -5.8862 < 1e-04
#> sexfemale -1.3242 0.6436 -2.0575 0.039639
#> time 0.2851 0.0396 7.2089 < 1e-04
#> sexfemale:time 0.0402 0.0545 0.7372 0.461005
#>
#> Integration:
#> method: adaptive Gauss-Hermite quadrature rule
#> quadrature points: 11
#>
#> Optimization:
#> method: hybrid EM and quasi-Newton
#> converged: TRUEWe continue by checking the impact of the chosen number of quadrature points to the parameters estimates and the log-likelihood value at convergence. First, we refit the model with an increasing number of quadrature points. The default when the number of random effects is smaller or equal to two is 11 points. We fit then with 15, and 21 points:
fm1_q11 <- fm1
fm1_q15 <- update(fm1_q11, nAGQ = 15)
fm1_q21 <- update(fm1_q11, nAGQ = 21)
models <- list("nAGQ=11" = fm1_q11, "nAGQ=15" = fm1_q15, "nAGQ=21" = fm1_q21)We now extract from the model the estimated parameter for the fixed
effects (using function fixef()), for the random effects,
and the log-likelihood (using function logLik()):
extract <- function (obj) {
c(fixef(obj), "var_(Intercept)" = obj$D[1, 1], "logLik" = logLik(obj))
}
sapply(models, extract)
#> nAGQ=11 nAGQ=15 nAGQ=21
#> (Intercept) -2.61816557 -2.61679077 -2.6168440
#> sexfemale -1.32418678 -1.32349829 -1.3235049
#> time 0.28514773 0.28501148 0.2850151
#> sexfemale:time 0.04015372 0.04020003 0.0401995
#> var_(Intercept) 4.26266211 4.26351799 4.2636311
#> logLik -374.51972108 -374.51983340 -374.5198046We observe a rather stable model with virtually no differences between the different choices of quadrature points.
We first compare the model with a simple logistic regression that does not include any random effects:
km <- glm(y ~ sex * time, data = DF, family = binomial())
anova(fm1, km)
#>
#> AIC BIC log.Lik LRT df p.value
#> fm1 759.04 772.07 -374.52
#> km 919.11 937.85 -455.55 162.07 1 <0.0001We obtain a highly significant p-value suggesting that there are
correlations in the data that cannot be ignored. Note: the
anova() method that performs the likelihood ratio test
calculates the p-value using the standard \(\chi^2\) distribution, here with one degree
of freedom. However, because the null hypothesis for testing variance
parameters is on the boundary of the corresponding parameter space, it
would be more appropriate to use a mixture of \(\chi^2\) distributions.
We extend model fm1 by also including a random slopes
term; however, we assume that the covariance between the random
intercepts and random slopes is zero. This is achieved by using the
|| symbol in the specification of the random
argument, i.e.,
The likelihood ratio test between the two models is computed with
function anova(). When two "MixMod" objects
are provided, the function assumes that the first object represents the
model under the null hypothesis, and the second object the model under
the alternative, i.e.,
anova(fm1, fm2)
#>
#> AIC BIC log.Lik LRT df p.value
#> fm1 759.04 772.07 -374.52
#> fm2 730.94 746.57 -359.47 30.1 1 <0.0001The results suggest that we need the random slopes term. We continue by testing whether the covariance between the random effects terms is zero. The model under the alternative hypothesis is (results not shown):
And again the likelihood ratio test is performed by a call to
anova() (results not shown):
anova(fm2, fm3)
#>
#> AIC BIC log.Lik LRT df p.value
#> fm2 730.94 746.57 -359.47
#> fm3 731.63 749.87 -358.82 1.31 1 0.2523The results now suggest that indeed the covariance between the two random effects terms is not statistically different from zero.
We continue our illustration with a Poisson mixed effects model. We start again by simulating some data for a Poisson longitudinal outcome:
set.seed(1234)
n <- 100 # number of subjects
K <- 8 # number of measurements per subject
t_max <- 15 # maximum follow-up time
# we construct a data frame with the design:
# everyone has a baseline measurement, and then measurements at random follow-up times
DF <- data.frame(id = rep(seq_len(n), each = K),
time = c(replicate(n, c(0, sort(runif(K - 1, 0, t_max))))),
sex = rep(gl(2, n/2, labels = c("male", "female")), each = K))
# design matrices for the fixed and random effects
X <- model.matrix(~ sex * time, data = DF)
betas <- c(2.13, -0.25, 0.24, -0.05) # fixed effects coefficients
D11 <- 0.48 # variance of random intercepts
# we simulate random effects
b <- rnorm(n, sd = sqrt(D11))
# linear predictor
eta_y <- drop(X %*% betas + b[DF$id])
# we simulate Poisson longitudinal data
DF$y <- rpois(n * K, exp(eta_y))We fit the mixed effects Poisson regression for y
assuming random intercepts for the random-effects part.
As previously, the summary method gives a detailed output of the model:
summary(gm1)
#>
#> Call:
#> mixed_model(fixed = y ~ sex * time, random = ~1 | id, data = DF,
#> family = poisson())
#>
#> Data Descriptives:
#> Number of Observations: 800
#> Number of Groups: 100
#>
#> Model:
#> family: poisson
#> link: log
#>
#> Fit statistics:
#> log.Lik AIC BIC
#> -2782.306 5574.611 5587.637
#>
#> Random effects covariance matrix:
#> StdDev
#> (Intercept) 0.9781394
#>
#> Fixed effects:
#> Estimate Std.Err z-value p-value
#> (Intercept) 2.9447 0.3082 9.5545 < 1e-04
#> sexfemale -0.8611 0.2699 -3.1906 0.0014199
#> time 0.2404 0.0016 151.3464 < 1e-04
#> sexfemale:time -0.0511 0.0028 -18.3982 < 1e-04
#>
#> Integration:
#> method: adaptive Gauss-Hermite quadrature rule
#> quadrature points: 11
#>
#> Optimization:
#> method: hybrid EM and quasi-Newton
#> converged: TRUEIn settings with few subjects, repeated measurements of separation
effects, the package also allows to place a penalty in the fixed effects
regression coefficients \(\beta\). The
penalty/prior is in the form of a Student’s t distribution with mean 0,
scale parameter 1, and 3 degrees of freedom, and it is placed in all
\(\beta\) coefficients except from the
intercept. The penalized model can be fitted by setting argument
penalized to TRUE, i.e.,
gm2 <- mixed_model(fixed = y ~ sex * time, random = ~ 1 | id, data = DF,
family = poisson(), penalized = TRUE)cbind('unpenalized' = fixef(gm1), 'penalized' = fixef(gm2))
#> unpenalized penalized
#> (Intercept) 2.94471506 2.9433925
#> sexfemale -0.86111218 -0.8599374
#> time 0.24039444 0.2404593
#> sexfemale:time -0.05105926 -0.0511505In this example we observe small differences between the penalized and unpenalized models. The users have the option to alter the specification of the Student’s t penalty by directly specifying the mean, scale and degrees of freedom arguments of the distribution. For example, a ridge penalty could be placed by setting the degrees of freedom to a high value. The call in this case should be: